Counting matching models…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
The screw is used to fix the light fixture to the top of the flagpole. A ornament like ball or eagle will not work with the external alpha 915 antenna. If you want to put an internal antenna inside the light fixture, then you can keep the…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
I thought @t4obrien's case needed a little extra on the front so I added some grooves to break the surface a bit. For all other files please go to the original model and download from there.
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Bender's bigger, badder brother is here! Meet Flexo, the most flexible Meshtastic powered node "case kit" available… and its FREE to print! Check out the intro video HERE and the teardown video HERE . ***ASSEMBLY VIDEO NOW LIVE CLICK…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
09.02.2026 Update: add new Front part with new necenano support, which uses low-profile USB-C connector. 18.02.2024 Update: add Base.stl file and upgraded step file In relation to the original model: - the profile of the adjoining surface…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
This is a modular case for the RAK WisBlock Starter Kit with the 19007 baseboard. The idea behind this project was to make a simple-to-assemble and customizable case and also eliminate screws, washers and fasteners other than those that…
I purchased a LoRa module from Amazon to get started learning about Meshtastic, and I realized after receiving it that I needed an enclosure for it. I didn't realize how easy it would be to set up. I would assume if you're here you…
📄 Meshtastic Winter Solar Mount – 67° Tilt Bracket Currently, my Meshtastic RAK is running smoothly with a 5V 10W solar panel and 3×18650 Li-ion batteries — even during bad weather conditions. The setup uses the 67° solar panel bracket…
Hermes is an easy to deploy external node enclosure, version 2.0 now supports the RAKWireless 19007/19003 and HeltecV3/V4 (with MPPT solar controller!). It enables you to deploy external nodes for MeshCore or Meshtastic (or others!)…
Case for FakeTec with internal antenna. The nRF module must be soldered directly to the board without headers (I used solid-core mounting wire). The case consists of three parts. The frame must be glued to the lid. Supports around the…
I wanted a compact case to house a Heltec V3 and an 18650 battery. I was unable to find one I liked, so I designed one. This was designed in OnShape if you would like to make some alterations. Features Changeable faceplate Battery Kill…
I wanted to put a Meshtastic node on my car so I can get better reception when ‘wardriving’ so I designed this one that sticks on using 4 magnets. You can fit pretty much any hardware inside, but it has provisions for a Heltec T114 LoRA…
This node design requires many parts to complete, and documentation is solidly a WIP. However - here are the parts I designed around: Solar Panels (6x): https://a.co/d/8jMYsYe Shottky Diodes (6x 1N5817): https://a.co/d/blj1DMV Battery…
The screw is used to fix the light fixture to the top of the flagpole. A ornament like ball or eagle will not work with the external alpha 915 antenna. If you want to put an internal antenna inside the light fixture, then you can keep the…
I started building Mesh in my neighbourhood and tried out several radios. I wanted to have a printable case that could be used with multiple radios (Seeed, Heltec, RAK) in multiple configurations (with POE, USB-C, external…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
A minimalist case for the XIAO nRF52840 & Wio-SX1262 kit. It is designed to be small and portable using the internal antenna. It is designed for a 650mAh 18350 battery, which is enough to power this hardware for several days using…
The switch_mount_bdy_v4.3mf is an mount for switch with other dimensions than the original model.
Just a board and holder for original design - for rest, you need to print https://www.printables.com/model/905414-meshcore-meshtastic-solar-node-rak-v3
Mesh for large LiFePo4 battery 50Ah Winston. Designed to attach to a fence post with a diameter of 38mm, attached using metal straps or electrician's plastic. Node is not for a solar panel, only for a battery that is occasionally charged.…
Redesign of XIAO ESP32S3 & Wio-SX1262 case to accommodate drone usage. This setup is appx 44g total printed in PETG. This will make most drones in the sub 250g category above 250g. Please follow all laws applicable to your usage. You can…
Compact and durable Meshtastic/Meshcore node based on the RAK19003, a 33140 LiFePo battery, and an Adafruit solar charger. See parts list below. The gasket is intended to be made using 1.75mm TPU filament or using standard 0.070" oring…
A compact LoRa SolarNode case that is suitable as MeshCore/Meshtastic® repeater. It offers enough space for up to 4x 18650 cells. 🛠 WORK IN PROGRESS: This project is still work in progress. Some dimensions still might change in next…
CONSTRUCCIÓN 1.- PLACA MICROCONTROLADOR + MODULO RADIO Podemos comprar una placa electronica ya construida, una Heltec T114 sin pantalla ni GPS (no probada aun por mi pero creo que valdria). Si alguien prueba que nos diga que tal. O…
If you download and build this design, please rate it! A classic DIY reference station for an outdoor solar node. Existing designs for Meshtastic/MeshCore solar nodes involve using Harbor Breeze (Li-ion battery) solar garden lights. A…
The case is equipped with a cutout for the screen, and two control buttons for the board. It is possible to install two 18650 batteries. There is a type-c charging terminal on the side. There is a hole on top for installing an SMA antenna…
Elevate your LoRa gateway or Meshtastic node with this custom-designed pole mount. Specifically engineered for fiberglass omnidirectional antennas (like those used with RakWireless, Helium, or MeshCore kits), this mount provides a secure…
A improved version of my Meshtastic solar node: Easy to print, less parts required and stronger antenna thanks to N-connector. Instead of a 10 W panel in a 45 degree angle this node now is using a 5W panel in a 30 degree angle. Print…
MagSafe LoRa Radio Enclosure for Meshtastic & MeshCore A sleek, compact enclosure designed to turn your RAK WisBlock into a portable, phone-mountable mesh radio. Perfect for off-grid communication, hiking, emergencies, or just…
Simple and cute quick printing case for the Heltec E213 eInk node. There's even a little room for a battery if you're so inclined. Whipped this together for my desk and though I would share if anyone else with the same node wants it...…
Meshtastic Heltec V3 & V4 with 5000 OR 10,000 mAh Battery Holder – Junction Box Ready This enclosure setup is designed to house Heltec LoRa V3 or V4 Meshtastic nodes along with a 5000 mAh LiPo battery , creating a compact, durable, and…
I had a solar panel that would be a good use in this micro solar node. The area where I am located has 95% of sunny days so this panel is sufficient for this purpose. Two 18650 batteries can keep the node operational for 2-3 days with…
Full build and parts list here: https://youtu.be/SGtsrj1iNdA?si=aU3m2Nj5qC_zZCgw Youtube channel: www.youtube.com/@comeonMacGyver Tips appreciated at paypal.me/ComeOnMacGyver
This a variation of my other Harbor Breeze pole mount , but this one uses magnets. You'll need to purchase these 1/4"-20 screw-in magnets as well as some 1/4" heat-set inserts if you don't have any (they come in handy). I recommend…
I needed a way to mount my Harbor Breeze Solar node to the exterior of my apartment as high as possible without drilling into the brick. I decided to make this mount that hooks onto the top of the window. I have also added a small command…
Sized for the Makerfocus 3000mah pack but probably fits others of the same spec Sized for PLA Uses the screws included with the enclosure/plate kit Antenna slots are sized for the included bluetooth with the adhesive strip and paper intact
The assembly is simple. The bottom part has a hole at the bottom for the support rod. The coaxial cable can pass inside the hollow rod, or there is a side hole to route the cable outside. The middle part holds the radial wires. The outer…
If you purchased any RAK Unify enclosures, such as the RAK Wismesh Solar Repeater Mini for Meshtastic, you'll need some mounting brackets. The default kit doesn't include them, so I've made some based on RAK's own design documents. They…
Changed from 35 to 40 degrees
This case for the RAK WisBlock Mini 4631 mesh board uses magnetic stickers that are compatible with MagSafe to attach the node device to your phone for convenience. The case has a comfortable rounded shape, can take several different…
An outdoor/indoor solar powered RAKwireless meshtastic node enclosure. Compatible with any 1/4-20 Camera mount. Screw-off hardware-less base allows for easy maintenance access. Will continue to update as needed to resolve any issues or…
Minimum needed hardware(check on latest photo more information) : ESP32 30 pin with ebyte e22 900m-30s/22s/33s and 0.96 inch oled I2C, for bottom part you need to use 4 m2 10mm bolts, firmware and intruction to connect it's on latest…
Print ASA or PETG if you are not setup for ASA for the best outdoor parts. Full build and parts list here: https://youtu.be/SsMSfYguJWU UPDATE: adding a voltage regulator video here: Donations are greatly appreciated!…
The evolution of the ABM -- Absolute Bare Minimum Node. This node uses a waterproof cigarette case/lighter as its enclosure with printed node sled and case holster. Glue the completed unit on the back of any "security camera" solar panel…
Print as you like. The antenna rod is 6mm in diameter, and the countersunk screw's thread is 4mm . Added a version for double sided tape and one for a M4 bolt.
This project provides a complete solution for building a compact, vertical Meshtastic or Meshcore Desk Node . It is specifically designed to house a combination of an nRF52840 Promicro and the DX-LR30 LoRa module . The design includes two…
The changes I made: Rotated the board & moved the USB port to the side instead of the top. (edit, both top and side versions are available) I used a 1.3 OLED instead of 0.96 (pls excuse my old eyes). Widen the case size (width and…
The original low profile design is great, but I needed more room in the compartment to accommodate larger batteries and a solar mppt board.
THIS IS A WIP this solar node is designed to be put on top of a vehicle and secured via magnets, this case is designed to be assembled with the use of silicone, this case is the V1 and may not have accurate measurements for mounting or…
The H3 case features the following modifications over the H1, based on my own experience printing and using the H1 case, and user feedback accumulated from the original model's makes, remixes, and comments. Multiple sizes to accommodate…
Meshtastic RAK Mini Solar Panel Housing A compact, weather-resistant solar node housing for the RAKwireless WisBlock Mini (RAK4631 + RAK19003) with a 3000mAh LiPo and external antenna support. 🔆 Description This housing mounts directly to…
Obviously print with something that will weather well outside (ex: PETG). I used organic supports and they worked well and were easy to remove. May 2026 I added a 4" OD pipe mount. I used zip ties to attach mine, but I think it should…
This is a remix of a great mount for the newer style Harbor Breeze Solar spot light. These relatively inexpensive lights make for great little solar nodes in Meshtastic/Meshcore projects. The original mount was for use with a SMA…
RAK19007 Weatherproof Meshtastic Node Case A rugged and compact weatherproof (not submersible) case designed specifically for the RAK19007 WisBlock board. This design features a highly organized internal carrier frame and custom TPU…
# Magnetic Car-Mount LoRa/Meshtastic Solar Case A sleek, aerodynamic, solar-powered case for mounting a Meshtastic LoRa node on your car roof. The triangular wedge profile minimizes wind drag and noise at highway speeds, while four…
I remixed this to get a bigger battery inside (the one I had in store) The case is super simple and compact. Use the original case lid. Than you @dreimal_8
reshaped hole to allow slide switch
Basándome en el esquemático de faketec de @ gargomoma hice está variante para fabricar en tu CNC casera. Está PCB se hace con una sola capa. Tiene el botón de funciones y el de reset. El resto no me cabía. Los archivos constan de:…
Vision Master E213 ESP32-S3R8 LoRa Development Board SX1262 Chip with 2.13" E-Ink Display LoRaWAN BLE 5.0 WiFi Compatible with Arduino LoRa Meshtastic IoT（902-928MHz). I was looking for a case for the Heltec E-213 Vision Master that was…
Ever wondered how to keep a solar-powered mesh node running high in a tree canopy without worrying about which way the sun is shining? In this video, I build a custom 360-degree solar tree node designed to stay charged and connected no…
A simple broad parabolic reflector for Meshtastic 915 or 868 MHz. This has been tested with the Alfa 915 N Connector antenna and has minimal impact on SWR. Front to back gain is around 15 dB with almost no difference in signal strength…
There's a popular DIY for turning a cheap Harbor Breeze solar light into a Meshtastic node. Unfortunately, that light doesn't seem to be available anymore. I previously designed a base to work with a newer model light that was readily…
UPDATED VERSION HERE: 🚗 Solar Meshtastic / Meshcore Car Node – Any Panel Edition! Tired of the original solar panel being constantly sold out? I’ve remixed this awesome low-profile car node so you can use any 5V solar panel you want! This…
This case is designed for a Heltec T114 v2, and packs a battery life punch fitting a 21700 cylindrical cell battery, and a 60x30mm 5V solar cell. It can accommodate the optional GPS module, and a walkie-talkie/Baofeng style belt clip can…
The case is equipped with a cutout for the screen, and two control buttons for the board. It is possible to install two 18650 batteries. There is a type-c charging terminal on the side. There is a hole on top for installing an SMA antenna…
This will enclose the board, a 3000mAh battery, a power switch, and a GNSS unit. It's not perfect, but I've spent too much time on it already. Requires some soldering for the switch and it's probably a good idea to use heat shrink over…
A solution to allow for a 2.8" crowpanel to be mounted and displayed on a desk. I would recommend getting the case kit that comes as an additional low cost add on to take advantage of the nice front bezel and screws but nothing else is…
Simple mount to fit a Heltec V3 with 3x 18650 cells. The 3D files are for the inner mount only and require placement in a waterproof enclosure. Heltec V3 LoRa - https://amzn.to/4cIXtGz M3 Button Head Screws (8mm) – https://amzn.to/3P8Seq0…
This model allows you to mount your Sensecap T1000E to your dog's collar. This makes for a great pet tracker. While it's easiest to print flat, angled printing will provide a much stronger print.
imple housing with sliding lid with a secure “click” closure. Many thanks to TuTu for the fantastic template! Hint: Switch off via the meshtastic app, switch on by pressing the reset button. This saves an additional switch. Battery: I…
Cover works on all box versions. UPDATE: 2026-07-29: Added Bridge Support Upper V2 UPDATE: 2026-07-25: Added Bridge 196 V6 and bridge support lower and upper for 2X T114 and 3065. UPDATE: 2026-05-08: Added Bridge (double antenna for two…
maybe you need a longer antenna cable. use M4x16 and M4x30 screws with nuts. maybe i will add an insert version for threat inserts. Printed in PETG.
I've got one of the 868Mhz Meshcore repeaters with the 5.5db 40cm antenna but it came with a pole mount bracket and I needed wall mount. I've made this wall mounting bracket with an offset to hold it away from the wall and up a bit so…
%80 infill draw on supports if they don't generate automatically PLA or PLA+
Based on Mike Molinas excellent model. Only problem was, I had already purchased SMA antennas and needed an adapter to fit. Ended up using these: https://www.amazon.com/dp/B0DQCXPBQX ? Major difference is that these require M2 screws to…
This is the Model KC housing I designed for the RAK 19007, as well as a charging dock, which is intended for quick transport, deployment, and recharging from a hard shell case. It was created with SAR use in mind, so it has the following…
***UPDATE 9/6/24*** Added a proper cover designed to be used with the Silicone cover for the Cardkb. ********************************* This is a case to build a stand alone Meshtastic communicator using the Heltec ESP32 V3 and the M5Stack…
This is an adapter for the Harbor Breeze Solar node concept that will mount it to a 15mm railing as seen in the picture. Allows the mounting of the node from this project to a railing. I printed mine in PETG. You will need some M2x12mm…
If you like this model, and you're feeling generous, please check out my Ko-Fi page here ! Updated 07/02/2025 - I have added a new version that includes a space for a small switch. This case is designed to clip onto the back of the…
See changelog to see all the updates and changes I did. __________________________________________________________________________ Original Muzi text for his Original H1: Case for the Heltec V3 Lora board. Recommended to print in a Matte…
Meshtastic Weather Station Node case compatible with the Acurite 06054 Stevensen Screen Node case with plenty of room for sensors Case snaps into screen securely but can be easily removed All connectors come out the bottom of the screen…
***NIBBLER2 WITH HELTEC V4 SUPPORT AND A POWER SWTICH IS AVAILABLE FROM MY WEBSITE HERE *** Say hello to Nibbler, the tiny HeltecV3 or Heltec T114 “pocket” Meshtastic powered node. THESE PRINT FILES INCLUDE BOTH VARIANTS OF NIBBLER,…
Usecase Meshtastic is a open source community project that aims to provide a off-grid, decentralized, mesh network that runs on affordable, low-power devices. https://meshtastic.org/ This design offers a snap-housing for one of the…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
This RAK19007 WisBlock case is designed to be super rugged and printed in ABS to withstand higher temperatures. Recommendations: Use 4 walls and 15% infill for all Top and Bottom Plates - Use supports Insert - Use supports Shell - Use…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
***Redesign 03/01/2026*** Button base was rounded to avoid warping of corners. Fillet was added to the cover's side posts to re-enforce weak spots. Middle frame was redesigned to apply even pressure despite battery size which was…
An enclosure for the LILYGO Meshtastic T-Beam ESP32 TTGO Development Board with LCD and rear mounted 18650 battery mount. Requires four (4) 16mm M2 screws. OpenSCAD file requires BOSL2 (https://github.com/BelfrySCAD/BOSL2) and nutsnbolts…
Update 11/10/2024: I will be uploading an updated version of this model this weekend (After I fully test everything), I have a new rear battery cover with a built in power switch, as the soft off for the V3 still chews power, and I have…
Heltec fixed the “long message” and “Bluetooth disconnect” problem with a new hardware Revision, make sure that you order the updated version to avoid problems!…
