1 / 12
Tube Case for Seeed Studio XIAO nRF52840 & Wio-SX1262 (Meshtastic / MeshCore) — image 1
1 / 12

Tube Case for Seeed Studio XIAO nRF52840 & Wio-SX1262 (Meshtastic / MeshCore)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Tube Case for the Seeed Studio XIAO nRF52840 & Wio-SX1262 Kit for Meshtastic/MeshCore with power switch

Rating
5 / 5
Likes
96
Downloads
619
Makes
3
Views
4,139
Reviews
2

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

A compact tube-style enclosure designed for the Seeed Studio XIAO nRF52840 & Wio‑SX1262 Kit.
This case is suitable for portable Meshtastic or MeshCore LoRa nodes, powered by a single 18650 Li-ion battery.

The cylindrical design protects the electronics while keeping the device lightweight and easy to mount or carry. An external antenna connects via an SMA connector, while a side-mounted toggle switch provides simple power control.

See the kit here: https://www.seeedstudio.com/XIAO-nRF52840-Wio-SX1262-Kit-for-Meshtastic-p-6400.html

Print Settings

  • Material: PETG

  • Layer height: 0.2 mm

  • Walls: 4 perimeters

  • Infill: 15%

  • Supports: Organic supports recommended for all parts except the main body

Bill of Materials

  • XIAO nRF52840 & Wio-SX1262 Kit

  • toggle switch

  • Panasonic NCR18650B (3.7 V 3400 mAh)

  • 18650 Li-ion battery protection board

  • SMA-K to IPX pigtail cable (10 cm)

  • antenna with SMA connector

  • hookup wires

Assembly

  1. Print all parts.

  2. Install the toggle switch

    • Solder wires to the switch.

    • Place it in the switch slot.

    • Secure it with hot glue.

  3. Wire the XIAO board

    • Solder wires to the BAT + and BAT − pins on the XIAO nRF52840 board.

  4. Connect the battery

    • Solder the battery protection board to the 18650 battery.

    • Connect the protection board output to the XIAO board power wires.

  5. Install the antenna connector

    • Insert the SMA-K → IPX pigtail into the case.

    • Connect the IPX end to the SX1262 board.

  6. Insert all components into the tube and close the case.

Optional

For improved moisture resistance, you can add rubber O-rings:

  • between the antenna and SMA connector

  • between the tube and the cap

This helps protect the electronics when used outdoors.

Tags