1 / 12
Tube Case for Seeed Studio XIAO nRF52840 & Wio-SX1262 (Meshtastic / MeshCore) — zdjęcie 1
1 / 12

Tube Case for Seeed Studio XIAO nRF52840 & Wio-SX1262 (Meshtastic / MeshCore)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tube Case for the Seeed Studio XIAO nRF52840 & Wio-SX1262 Kit for Meshtastic/MeshCore with power switch

Ocena
5 / 5
Polubienia
96
Pobrania
619
Wydruki
3
Wyświetlenia
4139
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A compact tube-style enclosure designed for the Seeed Studio XIAO nRF52840 & Wio‑SX1262 Kit.
This case is suitable for portable Meshtastic or MeshCore LoRa nodes, powered by a single 18650 Li-ion battery.

The cylindrical design protects the electronics while keeping the device lightweight and easy to mount or carry. An external antenna connects via an SMA connector, while a side-mounted toggle switch provides simple power control.

See the kit here: https://www.seeedstudio.com/XIAO-nRF52840-Wio-SX1262-Kit-for-Meshtastic-p-6400.html

Print Settings

  • Material: PETG

  • Layer height: 0.2 mm

  • Walls: 4 perimeters

  • Infill: 15%

  • Supports: Organic supports recommended for all parts except the main body

Bill of Materials

  • XIAO nRF52840 & Wio-SX1262 Kit

  • toggle switch

  • Panasonic NCR18650B (3.7 V 3400 mAh)

  • 18650 Li-ion battery protection board

  • SMA-K to IPX pigtail cable (10 cm)

  • antenna with SMA connector

  • hookup wires

Assembly

  1. Print all parts.

  2. Install the toggle switch

    • Solder wires to the switch.

    • Place it in the switch slot.

    • Secure it with hot glue.

  3. Wire the XIAO board

    • Solder wires to the BAT + and BAT − pins on the XIAO nRF52840 board.

  4. Connect the battery

    • Solder the battery protection board to the 18650 battery.

    • Connect the protection board output to the XIAO board power wires.

  5. Install the antenna connector

    • Insert the SMA-K → IPX pigtail into the case.

    • Connect the IPX end to the SX1262 board.

  6. Insert all components into the tube and close the case.

Optional

For improved moisture resistance, you can add rubber O-rings:

  • between the antenna and SMA connector

  • between the tube and the cap

This helps protect the electronics when used outdoors.

Tagi