1 / 6
Meshtastic Seeed XIAO nRF52840 & Wio-SX1262 Kit + 18650
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple, small and streamlined case for Meshtastic
- Rating
- 0 / 5
- Likes
- 82
- Downloads
- 348
- Makes
- 1
- Views
- 4,449
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
Uses these terminals from Amazon for the 18650 sled. For the spring terminal, i trimmed the tab slightly, and it slides in at a 90 degree angle to route the wire up the side of the sled, and through the hole in the top. (pictures attached)
.15 layer height on a .4mm nozzle.
The extra legs of the node will need to be snipped and you will need an SMA connector like these from Amazon. There is a nut embossed onto the lid that will allow for wrenching the connector on. I used a little hot glue to waterproof.
Use thin gauge wire, likely 22 or thinner.