Meshtastic Seeed XIAO nRF52840 & Wio-SX1262 Kit + 18650
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple, small and streamlined case for Meshtastic
- Ocena
- 0 / 5
- Polubienia
- 82
- Pobrania
- 348
- Wydruki
- 1
- Wyświetlenia
- 4449
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
Uses these terminals from Amazon for the 18650 sled. For the spring terminal, i trimmed the tab slightly, and it slides in at a 90 degree angle to route the wire up the side of the sled, and through the hole in the top. (pictures attached)
.15 layer height on a .4mm nozzle.
The extra legs of the node will need to be snipped and you will need an SMA connector like these from Amazon. There is a nut embossed onto the lid that will allow for wrenching the connector on. I used a little hot glue to waterproof.
Use thin gauge wire, likely 22 or thinner.