Meshtastic TTGO T-Beam Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rugged case for your TTGO T-beam with SMA antenna plug.
- Rating
- 4.778 / 5
- Likes
- 127
- Downloads
- 1,008
- Makes
- 7
- Views
- 11,569
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is a rugged case for your Meshtastic TTGO T-Beam device with SMA antenna plug.
I printed this using Overture PETG with 4 outer walls and 25% infil with the Prusament PETG settings. Use a dab of silicon grease on the switch cover for easy operation.
There are two face plate versions, one for the standard and one for a 28mm gps antenna. If you use the standard gps antenna you will need to un-stick it from the back of the T-Beam and move it to the front.
Hardware:
4x M3x12
4x CM2x4 2mm screws
6x M3 4.6x5.7mm heat sink nut inserts
1x 28x28x2.5mm plexi glass square
If you'd like you can buy me a coffee here: https://www.buymeacoffee.com/junrenman