Heltec V3 case with meshtastic Logo
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Another case for heltec v3 with 3000mah battery
- Rating
- 4.571 / 5
- Likes
- 82
- Downloads
- 1,062
- Makes
- 4
- Views
- 5,173
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
These models are intended for personal use only.
DO NOT copy, sell, trade or otherwise gain from my designs without my explicit permission.
Please respect the Creative Commons license restrictions I have chosen (http://creativecommons.org/licenses/by-nc-nd/4.0/) if you see the case for sale anywhere please reachout.
Another case for Heltec v3 board designed with the Meshtastic project (https://meshtastic.org) in mind that accepts 3000mah battery by maker focus.
Has a cutout for the sma antenna connector so the antenna doesn't move when you screw or unscrew the antenna.
Keep in mind the back side of the heltec board should go in first and the usb-c side. You will need to push the usb-c side of the case for the board to fit. If you want to remove the board from the case you will need to push the usb c side of the case and then apply gentle pressure to the screen.
Required hardware:
1 LiPo battery Amazon Link
1 Heltec v3 Amazon Link
Meshtastic® is a registered trademark of Meshtastic LLC.
Amazon links are for reference. I donot earn anything from the above links.