Heltec V2 and V3 Meshtastic Lora case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Heltec V2 (and V3, both stl version are provided) Meshtastic LoRa device case.
- Rating
- 4.75 / 5
- Likes
- 75
- Downloads
- 751
- Makes
- 4
- Views
- 5,259
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Heltec V2 (and V3, both stl version are provided) Meshtastic LoRa device case.
18650 Li-Ion battery holder included (for longer protected 18650 battery).
I recomend connect some high-gain antenna (some better and bigger than stock one what came with that board).
Both buttons are working with this case (you can click buttons, there are holes-buttons for that).
Indoor use only, it is not mentioned for outdoor usage (unless you will make it waterproof somehow).
Printed with two colors for nicer look:)
Small green dot next to power switch and logo are printed separately and glued in place.
***************************** Edit 13.10.2026 ***************************
Screws used: 2.5x12
***************************** Edit 14.05.2024 ***************************
Some users reports that they have problem print top part correctly (button part is fused and not moving clearly) so i have added version with extended button gap (top part).
Also added V3 top and bottom standard version.
Switch used:
50V 0.5A SS12F15 Mini Size Black SPDT Slide Switch
https://www.aliexpress.com/item/10000003088863.html?spm=a2g0o.order_list.order_list_main.161.793f1802AygBkO
or
https://www.aliexpress.com/item/4000042632226.html?spm=a2g0o.order_list.order_list_main.166.793f1802AygBkO
Battery contacts used from 18650 battery holder:
ABS 18650 Power Bank Cases 1X
https://www.aliexpress.com/item/1005006348930637.html?spm=a2g0o.order_list.order_list_main.217.793f1802AygBkO
BambuLab X1C
0.2
20 infill
PLA+
no supports