HP - Heltec Wireless Paper Case for Meshtastic
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for a Heltec Wireless Paper with buttons on the front
- Rating
- 4.846 / 5
- Likes
- 156
- Downloads
- 1,266
- Makes
- 14
- Views
- 7,996
- Reviews
- 13
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
***Redesign 03/01/2026***
Button base was rounded to avoid warping of corners.
Fillet was added to the cover's side posts to re-enforce weak spots.
Middle frame was redesigned to apply even pressure despite battery size which was important to get the triggers to work. Now a battery is no longer needed for the mechanism to work.
Triggers were redesigned to make the buttons to have even contact, no more crooked buttons
Buy it Here:
Materials:
Goals:
I wanted something simple and clean, no screws or supports needed.
A nice flat 3000mAh battery that gives a decent runtime
Needs to be compact and easy to slip into my pocket comfortably.
Be able to press the buttons from the front unlike ones already out there.
Printing Instructions:
All files have the parts in the best possible printing position, so just add them to your plate and print.
No supports needed, other than the spot where the belt hoop is, so block the supports for just that spot.
Print the triggers as slow as possible on their own to prevent any imperfections, this is the most important piece to get right.
I print everything with a layer height of 0.16mm line width 0.42mm
Confirmed Runtime:
Normal settings: 29hrs
Mode Client Mode
Frequency 906
Connected to a phone via Bluetooth.
Powersave mode: 173 Hrs
Mode Client Mode
Screen Timeout 60 sec
Power Savemode Enabled
Wait on bluetooth 10 Sec
Lite Sleep Duration 1800 sec
Connected to a phone via Bluetooth