Voron 0.2 TFT35 SPI V2.1 touch screen housing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a screen housing for the Voron 0.2, and the BTT TFT35 SPI V2.1 Thanks to Eric Ebert for helping design this.
- Rating
- 5 / 5
- Likes
- 133
- Downloads
- 676
- Makes
- 6
- Views
- 4,148
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
Disclaimer: I used BTT's CAD model and the Voron 0.2 CAD models for dimensions. I don't own a Voron 0.2 or a TFT35, but Printables member Eric Ebert, who assisted with many of the features of this design Printed and test fitted a couple of these during the design process.
The screen is held in via 4 m3x8 socket head cap screws, which go into the housing from the back and thread into the bezel. The bezel is secured over the accents with a couple drops of super glue.
I tried to design this so that it would require minimal supports, but the honeycomb patter has some fairly long bridges. PrusaSlicer's organic supports set to 30* worked very well for me on a similar design.
Edit: Added .stp files, for the remixers out there.