Voron 0.2 TFT35 SPI V2.1 touch screen housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a screen housing for the Voron 0.2, and the BTT TFT35 SPI V2.1 Thanks to Eric Ebert for helping design this.
- Ocena
- 5 / 5
- Polubienia
- 133
- Pobrania
- 676
- Wydruki
- 6
- Wyświetlenia
- 4148
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Disclaimer: I used BTT's CAD model and the Voron 0.2 CAD models for dimensions. I don't own a Voron 0.2 or a TFT35, but Printables member Eric Ebert, who assisted with many of the features of this design Printed and test fitted a couple of these during the design process.
The screen is held in via 4 m3x8 socket head cap screws, which go into the housing from the back and thread into the bezel. The bezel is secured over the accents with a couple drops of super glue.
I tried to design this so that it would require minimal supports, but the honeycomb patter has some fairly long bridges. PrusaSlicer's organic supports set to 30* worked very well for me on a similar design.
Edit: Added .stp files, for the remixers out there.