1.3'' OLED EC11 Display with Encoder and Buttons Housing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A housing for the cheap 1.3'' OLED Display (SH1106) with Encoder EC11
- Rating
- 5 / 5
- Likes
- 53
- Downloads
- 609
- Makes
- 2
- Views
- 1,384
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
A housing for the cheap 1.3'' OLED Display (SH1106) with Encoder EC11 like you find them on Aliexpress:
https://s.click.aliexpress.com/e/_c37Z1MCx
The housing is designed to take up the least amount of space. It is designed to work with 5mm long M3 Screws. I only attached STEP files since all modern Slicers support these and they are also easier to edit in cad.
Oled_EC11_Encoder_Case-Backcover can be used to make custom Versions. It just features the minimal needed geometry.
Oled_EC11_Encoder_Case_thickBack is 3mm thick and features two 2.8mm holes (for self taping M3) with a center distance of 25mm to be used for custom attachments