1.3'' OLED EC11 Display with Encoder and Buttons Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A housing for the cheap 1.3'' OLED Display (SH1106) with Encoder EC11
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 599
- Wydruki
- 2
- Wyświetlenia
- 1363
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
A housing for the cheap 1.3'' OLED Display (SH1106) with Encoder EC11 like you find them on Aliexpress:
https://s.click.aliexpress.com/e/_c37Z1MCx
The housing is designed to take up the least amount of space. It is designed to work with 5mm long M3 Screws. I only attached STEP files since all modern Slicers support these and they are also easier to edit in cad.
Oled_EC11_Encoder_Case-Backcover can be used to make custom Versions. It just features the minimal needed geometry.
Oled_EC11_Encoder_Case_thickBack is 3mm thick and features two 2.8mm holes (for self taping M3) with a center distance of 25mm to be used for custom attachments