P
Printables
Encoder for dc motor
Encoder for a dc motor (still not adapted to the yellow one)
Wyniki wyszukiwania: encoder
Liczymy pasujące modele…
P
Printables
Rack panel encoder mount
Standard encoder mount for rack panel with 24mm hole. (Neutrik etc.) Material: Whatever you want, but for outdoor use ASA, ABS or PETG. Support: NO
P
Printables
Encoder knob d6
When printed on MK4, tolerances are little tight (which is fine, at least it won't fall), but if you have less dimensionally acurate printer, maybe slightly increase the size in the slicer. Happy printing 😊.
P
Printables
EG_STARTS USB Encoder adapter for OSS-H
A baseplate for the OSS-H shifter to fit the EG-STARTS encoders commonly found on Amazon, Aliexpress etc. This encoder has a USB-B connector that needs to be exposed to allow removal of the cable. The baseplate fits both the original and…
P
Printables
Rotary Encoder
A drastically enlarged rotary encoder I made in order to learn how then work, as well as learning about mechanical bounce. Must print the Pin out of some flexible filament, I used TPU. Recommended to use very small copper wires, like the…
P
Printables
Faketec nrf52 Meshtastic Case with Encoder/Buzzer/GPS/Environment sensor, M5Stack CardKB Keyboard-ready
09.02.2026 Update: add new Front part with new necenano support, which uses low-profile USB-C connector. 18.02.2024 Update: add Base.stl file and upgraded step file In relation to the original model: - the profile of the adjoining surface…
P
Printables
TuuveiTwo Encoder Blocker
As said, a blocker for TuuveiTwo if you dont populate/have the encoder. Fits the case https://www.printables.com/model/948891-tuuveitwo-case quite well I am told. Now also a version that does not block the encoder :D
P
Printables
Incremental Rotary Encoder Lego Technics Block
This model lets you easily incorporate a rotary encoder into your Lego Tecnics mechanical designs. The gear is a press fit onto the encoder shaft and the shaft is centered on a Technics pin location for easy meshing. Designed to fit…
P
Printables
Encoder and slip ring mount for FFBeast Wheel v2
See v1 here: https://www.printables.com/model/1282058-hoverboard-motor-encoder-and-slip-ring-mount-for-f After feedback I've updated the Fusion 360 model by adding two other versions of the magnet holder, one that screws onto a 3d printed…
P
Printables
Standoff for hw-040 rotary encoder
I built this to support the encoder in my build of https://www.printables.com/model/1019283-project-igor-open-source-offline-loyal-cheerful-fo my build is documented in https://github.com/electron0zero/focus-timer I am attacing the scad…
P
Printables
Magnetic encoder mount for hoverboard wheel motor (FFBeast, OpenFFBoard) - all in one solution (drill guide, assembly guide, encoder holder), even your grandmother can do it
If you appreciate my work and like it, you can buy me a coffee ;) but this is absolutely not expected. Short introduction: The alignment of the magnet and encoder is the most critical factor for the mechanical precision of the steering…
P
Printables
1.3'' OLED EC11 Display with Encoder and Buttons Housing
A housing for the cheap 1.3'' OLED Display (SH1106) with Encoder EC11 like you find them on Aliexpress: https://s.click.aliexpress.com/e/_c37Z1MCx The housing is designed to take up the least amount of space. It is designed to work with…
P
Printables
Arcade USB Zero Delay Encoder SJ@JX Mount for FightBox F1
The smaller USB Zero Delay Encoder variant.
P
Printables
AS5600 magnetic encoder mount case
Mount for magnetic encoder ,module with AS5600 , use a 608 bearing .
P
Printables
ERCF EREC Springy Encoder with gate switch
I was having issues with the standard encoder housing losing its tension over time, leading to false encoder readings. I thought back to when "springy" was released for the ercf and how much it helped with reliable tension and applied it…
P
Printables
Cassette Tape Encoder Knob
For fans of vintage audio, I've made a Cassette Tape inspired encoder knob. It's designed to fit the Hercules Inpulse 200 series, but can easily be resized to fit your needs. I've also included a non-mmu version so you can pause at the…
P
Printables
Custom 12-Key Macropad with Encoder and LCD Display
This project is a custom 12-key macropad designed and built as an academic project. The enclosure and structural parts are 3D printed (FDM), while the keycaps were printed using SLA to achieve a higher-quality surface finish. The macropad…
P
Printables
Breadboard Mount for 1.3" OLED Display with EC11 encoder ESP Arduino
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl This set is designed for breadboard-based prototyping with Arduino and ESP32…
P
Printables
9x20 lathe spindle encoder geared pulleys and bracket
These parts are used to implement a spindle encoder on a 9x20 lathe using an Omron e6b2 encoder. This is useful if you are using a CNC conversion of the lathe. The LatheSpindleGT2 print replaces both the spindle gear and spacer. (assumes…
P
Printables
Creality CR-20 OLED and encoder adapter
This adapter is fitting cheap SH1106 1.3" OLED display bought on Aliexpress (dimensions on 3rd picture) and encoder with thread (up to M7). Screen requires 4 M3x4 screws to fix.
P
Printables
Blinky Encoder v623zz with dual ecas
this is a quick hack job of a remix to add ecas to the blinky encoder with the v623zz bearings so it can be used as a standalone encoder. this isn't tested alignment may be off.
P
Printables
Black sun encoder knob cap for a 26mm encoder wheel (ender 3)
I wanted to make my encoder wheel look cool, so I took the black sun logo and made a simple cap for an existing encoder wheel. The stock wheel is 26mm in diameter, so this cap will fit any wheel that is 26mm
P
Printables
CASE Heltec V3 Rotary Encoder 2x 18650
Case designed to house a Heltec V3 node with a Rotary Encoder and up to 2 18650 cells. It has 3 parts, a frame and two covers. It is closed with 4 3x25 self-tapping screws.
P
Printables
Encoder Knob for Sim racing Wheel
-designed to be mounted on a 3mm plate -clearing on the underside for the mounting nut -knob will stop on the notch on the shaft to have enough clearing for button press -shaft needs to be shortened slightly -needs to be printed with…
P
Printables
Idler Wheel /Encoder Knob Replacement for Fusion F410
We have a Fusion F410 at work and have had several issues with it over the last two years, particularly with the 3d printed parts. We recently had a rash of feed errors only to find the plastic wheel was grinding against the encoder base…
P
Printables
Behringer X-Touch Encoder Knob
Print it upside down. It needs no supports, only a brim and some sanding (probably). I used a 0.4mm nozzle so the fins on the inside are 0.8 mm wide. As I only had sparkling black filament I spray painted and lacquered them so they got…
P
Printables
Knob-to-Rotary Encoder Interface - Negative Volume Generator
Designers: use this object as a Negative Volume in PrusaSlicer to add a knob-to-rotary-encoder interface to your design. After messing around with custom knobs for several years, my favorite (and the best-fitting one I've found) is the…
P
Printables
Rotary Encoder Style Knob (~200%) for your LCD Rotary Encoder
Actions: Download Take this model for a ride on your printer. Make Don't forget you can earn Prusameters (free filament and other cool rewards!) for printing out models and posting a photo of your Make here on Printables. Modify If you…
P
Printables
Digitech 1101 Preamp Encoder Knob
Many years ago I bought a used Digitech 1101 preamp and some of the knobs were missing. I did eventually get original Digitech knobs from the manufacturer, but that took a while. In the mean time I designed all the knobs for the preamp,…
P
Printables
Encoder Knobs - REK 18
An assortment of rotary encoder knobs primarily designed to fit encoders on mechanical keyboards, but that can be used with other devices that share the same footprint too. All variations have an outer diameter of 18mm, a height of 16mm,…
P
Printables
fischertechnik I2C AS5600 white PCB contactless rotary encoder (Drehwertgeber)
A contactless rotary magnetic encoder for fischertechnik with I2C 3,3V interface using the newer white square AS5600 modules. Comes in two versions, the 30x30mm version is more compact, but in many cases you'll want the 30x45mm version,…
P
Printables
RotorRiot Rotary Encoder Knob (D-shaft)
Rotor riot gimbal protector adapted to rotary encoder knob for smart controller.
P
Printables
FFBeast Encoder Assembly
Recently, for some unknown reason, a lot of people have been questioning and obsessing over the idea of using stupid high CPR encoders. If you're one of those, consider this: If you do the math for 4096 CPR that is 1024ppr, that means one…
P
Printables
ERCF EREC Encoder Mounted Filament Cutter GEARS with integrated supports
As I had some sagging issues on my first print, but didn't want to use auto generated supports, I remixed the original cutter gear to add integrated supports and added self supporting hole to the drive gear
P
Printables
Hoverboard FFBeast OpenFFBoard FFB Sim Wheel Encoder mount (Belt or Gear)
There are two different solutions here, a geared solution and a belted solution The gear solution worked well for me originally but turns out my motor wasn't fully concentric so the gears would fail to mesh and lose encoder steps causing…
P
Printables
EC11 Encoder Knob
An Encoder knob for the EC11 D shaft & Plum shaft. Has a slight radius on the top, and vertical knurling on the sides. Designed for 15mm D shaft and 15mm Plum shaft, however will work with 20mm shaft also. Height = 15.5mm Diameter =…
P
Printables
Simple Rotary Encoder Knob
A simple knob for a rotary encoder. I suggest 0.1 layer height and put a modifier on the first layer to make it walls only so that the infill doesn't ruin the looks of it. I also suggest using scarf joint seam around the entire wall…
P
Printables
mock up of rotary encoder
his is a mock up of a rotary encoder for further case designs sizes and dimensions have been measured carefully Ill be happy to get feedback once you used it ;)
P
Printables
Rack panel encoder mount
Standard encoder mount for rack panel with 24mm hole. (Neutrik etc.) Material: Whatever you want, but for outdoor use ASA, ABS or PETG. Support: NO
P
Printables
Encoder knob 24mm
Encoder knob for 6mm O shaft or flower shaft. For encoder with push button. Material: Whatever you want. Support: YES
P
Printables
Encoder knob d6
When printed on MK4, tolerances are little tight (which is fine, at least it won't fall), but if you have less dimensionally acurate printer, maybe slightly increase the size in the slicer. Happy printing 😊.
P
Printables
EG_STARTS USB Encoder adapter for OSS-H
A baseplate for the OSS-H shifter to fit the EG-STARTS encoders commonly found on Amazon, Aliexpress etc. This encoder has a USB-B connector that needs to be exposed to allow removal of the cable. The baseplate fits both the original and…
P
Printables
Magnetic Encoder Knob
I remixed the knob from here https://github.com/scottbez1/AS5600Knob because a 4 x 2mm diametric magnet was included with the sensor. Bought the sensor from HERE . Thanks for the included Fusion 360 file of the STL-Parts to scottbez1. For…
P
Printables
Encoder Knob - Baofeng UV5R
After trying multiple encoder knobs for the UV5R, I found this to be a worth replacement, you might too!
P
Printables
Ender 3 Pro Encoder Wheel
yep, its an encoder wheel. Its definitly smaller because it was designed to go a bit better with franzolielectronics' enclosure , so its maybe slightly less usable than the default. Made to be a set with my Z axis knob .
P
Printables
DSO138 encoder case end
Replacement end to hold a cheap encoder module with the standard acrylic DSO138 case Print Settings Printer: Huge corexy Rafts: No Supports: Yes Resolution: 0.2mm Infill: >20%
P
Printables
Rotary Encoder
A drastically enlarged rotary encoder I made in order to learn how then work, as well as learning about mechanical bounce. Must print the Pin out of some flexible filament, I used TPU. Recommended to use very small copper wires, like the…
P
Printables
Adaptive Button -Yoto & any rotary encoder or potentimeter D
Item 1: Dummy cover for knob Item 2: Large accessible gear for rotary encoder (IE RHB on Yoto) Item 3: Large upper base housing. Internal screw allows for attacment of base Item 4: Large lower base with screw in the middle. It also has a…
P
Printables
EC11 Rotary encoder knob and cover
Covers and knobs for EC11. Knobs are compatible with half shafts.
P
Printables
Rotary Encoder / Push Button Dev Stand (Parametric)
A stand for rotary encoders, large push buttons or similar round things that need to be interacted with. I sometimes need to work with rotary encoders and physical push buttons for the kind of software we're developing at work and my desk…
P
Printables
Hobby Motor with Encoder (DG01D-E, XRP)
Use this model to create your own robots/projects using the Hobby Motor with Encoder available from sparkfun: Plastic Gear: https://www.sparkfun.com/products/24053 Metal Gear: https://www.sparkfun.com/products/16413
P
Printables
Encoder Wheel Pendant for the LR4 with FluidNC
This are Housing and Mount files for my version of the CYD Dial Pendant for the Lowrider V4 From V1 Engeneering https://www.printables.com/model/1034840-lowrider-4-cnc in compination with the Jackpot controller running FluidNC. I used…
P
Printables
HackRF Portapack H4M Rotary Encoder Dial Upgrade
Encoder dial in Portapack H4M is far from perfect. This little add-on improves scrolling experience a lot. It is slimmer that the wheel made by @Farlei and does not restrict access to directional buttons as much. I printed mine on…
P
Printables
Faketec nrf52 Meshtastic Case with Encoder/Buzzer/GPS/Environment sensor, M5Stack CardKB Keyboard-ready
09.02.2026 Update: add new Front part with new necenano support, which uses low-profile USB-C connector. 18.02.2024 Update: add Base.stl file and upgraded step file In relation to the original model: - the profile of the adjoining surface…
P
Printables
Midas M32 - rotate encoder
Replacement for the cracked rotary encoder under the display on the Midas M32 mixer. If you like the model, I would be happy for your like. Pokud se vám model líbí, budu rád za váš like.
P
Printables
Encoder Case
This is a case for 5 rotary encoders. I made it with 5 KY-040 rotary encoders and an Arduino pro micro in mind.
P
Printables
Penguin EC_11 Knob for rotary encoder - Remix
Remix design from Wilko. This penguin is a knob for a rotary encoder EC11 15mm
P
Printables
TuuveiTwo Encoder Blocker
As said, a blocker for TuuveiTwo if you dont populate/have the encoder. Fits the case https://www.printables.com/model/948891-tuuveitwo-case quite well I am told. Now also a version that does not block the encoder :D
P
Printables
Incremental Rotary Encoder Lego Technics Block
This model lets you easily incorporate a rotary encoder into your Lego Tecnics mechanical designs. The gear is a press fit onto the encoder shaft and the shaft is centered on a Technics pin location for easy meshing. Designed to fit…
P
Printables
LCD + Rotary Encoder Bracket
Uses 4 M3 x 4 Screws to mount the LCD screen in place. The rotary encoder is held in place by the socket and external hexagonal nut. NOTE: This bracket is purely for testing a LCD and rotary encoder knob setup keeping them a bit more…
P
Printables
Rotary Encoder Knob (Illuminated)
I originally designed this button as a replacement part for a VW Golf 5 radio. However, the button can also be used for any other rotary encoder. These are the materials I used for my prints: "core_transparent" & "TransparentRing" : PETG…
P
Printables
Small SH1106 display and encoder mount for Ender 3 4040 extrusion
The original display of my Ender 3 was getting in the way of my IDEX conversion. I rarely use the controls on the printer itself because it runs Klipper, but didn't want to give them up altogether. I designed this small holder for a 1.3in…
P
Printables
Filament Movement Sensor based on standard creality extruder and KY-040 Encoder
This Filament Motion Sensor uses the standard extruder parts of the Creality Ender3/5 and a KY-040 Encoder BOM: Creality Bowden style extruder KY-040 Encoder Idler Bearing Ø16mm ØOD 8mm ID 5mm T Ø18mm Ring found on Creality Belt…
P
Printables
Lathe Encoder Disc for FIL
My father in law customized his lathe to add automated speed control, however the original encoder disc no longer fit in the space he had available. He hand made his own, but could only achieve 60 slots. By upgrading to 120 slots at the…
P
Printables
Rotary Encoder Knob
I designed this 3d Model for the MacroBridge (QMK MacroPad). Dimensions: 32mm x 18.5mm It features a sleek pattern around it and can be printed without material.
P
Printables
Rotary Encoder Knob
I designed this 3d Model for the MacroBridge (QMK MacroPad). Dimensions: 32mm x 18.5mm It features a sleek pattern around it and can be printed without material.
P
Printables
fischertechnik AS5600 contactless rotary encoder (Drehwertgeber)
Contactless rotary encoder based on the AS5600 hall sensor for the fischertechnik construction toy system. It uses these kinds of boards available from ebay and others. Please note that the board's "PWM" connector actually will provide an…
P
Printables
fischertechnik angular position encoder / potentiometer
A simple case for Piher-15 Potentiometers (order number PT15 N H05) for the fischertechnik construction toy system. Use the larger version if you find that the fischertechnik pegs of the smaller version don't print well. For connecting…
P
Printables
20x4 LCD housing + Encoder (for 3D printer control)
Simple housing for a 20x4 text LCD module + push-encoder, buzzer and button. (No SD card!) Utilizes a 60mm x 40mm prototype PCB board instead of a pre-made PCB. You need: 2004A LCD module 60mm x 40mm protoboard ("perfboard") Encoder with…
P
Printables
AS5600 encoder Nema17 stepper motor mount
A simple holder for the AS5600 magnetic encoder. The boards press fits into the the holder. It uses the mounting holes already on the stepper motor. Printing downloads 0.2mm layer height No supports required
P
Printables
Ender 3 encoder nut M7x0.75
Ender 3 encoder nut M7x0.75 Best result with 0.08 layer height
P
Printables
Arduino and Breadboard holder with LCD and Rotary Encoder
A Arduino and Breadboard holder with LCD and Rotary Encoder
P
Printables
TT Wheel Encoder ring
Designed for an IR interruptor sensor attached to your chassis or hot-glued to the side of the motor. Might well also work with a reflective sensor, but I haven't tried that. You can go into the openscad file and change the number of…
P
Printables
MT6835 encoder holder for 42BLF Brushless Dc Motor
A simple holder for the MT6835 magnetic encoder designed to work seamlessly with 42BLF BLDC motors (motors with a 42mm flange size). The bolt circle diameter for the installation on the 42BLF motor is 32mm Details here :…
P
Printables
rotary encoder knob for the IKA RCT basic Magnetic stirrer
A replacement knob for the rotary encoder of the IKA RTC Basic magnetic stirrer, featuring a position marking printed in a second color.
P
Printables
keychron rotary encoder knob w/ AA knurling
a simple cool looking knurled knob that i made for my Keychron Q15 as the first CAD project. hole diameters are 6 mm and 4.8 mm, don't know about other rotary encoders tho, but maybe compatible with others (?) printing recommendations ≤…
P
Printables
Modular MIDI Controller with 8 Encoders on Raspberry Pi 2040 | TONY8
The TONY8 MIDI Controller – a self-made tribute to one of the most incredible people I know, Anton (Tony) Gusev . Combines a Raspberry Pi 2040 with USB-C for seamless plug-and-play use. Featuring 8 encoders for mapping in both DAW and DJ…
P
Printables
FFBeast direct drive encoder mount.
My version for FFBeast direct drive wheel encoder mount. If you are using bike spoke method and AMT10E3 encoder. Encoder mount connects to sk16 block leaving 3mm gap for phase wires. Mount has 2mm hole in the middle for centering the…
P
Printables
Vanilla cupcake Encoder knob
Its a little mixer knob like a cupcake. the dimension may be to adjust from the stl.
P
Printables
nomadBox - heltec WiFi LoRa 32(V3) case, GPS, BME280, buzzer, rotary encoder
Case for Heltec WiFi LoRa 32 V3 This case is designed for the Heltec WiFi LoRa 32 V3 and includes the following components: Included Components: GPS Module (NEO-6M or GT-U7) On/Off Switch (S3P = SRS3P, 19.4 x 5.6 x 5mm) → Link GY-BME280…
P
Printables
Digital Encoder Wheel & Mount
This is a wheel and mount for a digital encoder component taken from a dead printer. If you're here, you probably already know what a digital encoder is, and how it can be used in projects! This is thin, but your results may vary…
P
Printables
Heltec LoRa32 V3 Meshtastic Case with Encoder/Buzzer/Vibro/GPS/Environment sensor/Belt clip/M5Stack CardKB Keyboard-ready
Printing Recommendations: Use adaptive layer heights (up to 0.2mm max) for optimal surface quality and faster print times. Tree supports recommended for clean and easy support removal. Components: Heltec LoRa32 V3 NEO-6M GPS Module…
P
Printables
Small Dual Rotary Encoder for EC11 15mm (G1000 and other Panels)
This is a smaller version of Dual Rotary Encoder from FlightSimMaker. EC11 15mm round shaft. Update 2021-12-11: Added CRS Knob Added new Knobs with more details (V2) Added new Case with mounts (V2) Print Settings Printer Brand: Prusa…
P
Printables
Encoder Support - 7mm
I made a small adjustment, as I didn't have an 8mm drill, but a 7mm one.
P
Printables
Zero Delay Encoder Holder
Needed a holder for my Zero Delay board for my Retropie arcade cabin. It came out nice and I thought I would share it with you!