1 / 3
Hercules DJ Contest: Encoders [Inpulse 200 series] — zdjęcie 1
1 / 3

Hercules DJ Contest: Encoders [Inpulse 200 series]

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Design creative, stylish, and functional encoders for DJ controllers, compatible and ready to enhance mixing.

Ocena
5 / 5
Polubienia
18
Pobrania
317
Wydruki
8
Wyświetlenia
701
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

Technical information for all model files:

  • Nozzle size: 0.4 mm

  • Layer height: 0.2 mm (Quality)

  • Materials used: PLA/PETG

  • Printer used for prototyping: Prusa Core One

  • Type of bed used for prototyping: Textured

Notes:

  • All printers have different tolerances, we aimed to make a set of files that works on the maximum number of printers but your mileage may vary. 

  • Not compatible with other Hercules controllers except the DJControl Inpulse 200/300 series.

  • We added the .step file with minimum requirements for easier modeling 

Safety tips:

  • IMPORTANT: BE GENTLE when removing and putting caps back on. 

  • You may need to use a small plastic card or tool to lever them off and remove your original caps. A bit of lube may help the installation.

  • Do not perform any lateral movement with the caps under any circumstances. 

  • Customize at your own risk!

Tagi