Hercules DJ Contest: Encoders [Inpulse 200 series]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Design creative, stylish, and functional encoders for DJ controllers, compatible and ready to enhance mixing.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 317
- Makes
- 8
- Views
- 701
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Technical information for all model files:
Nozzle size: 0.4 mm
Layer height: 0.2 mm (Quality)
Materials used: PLA/PETG
Printer used for prototyping: Prusa Core One
Type of bed used for prototyping: Textured
Notes:
All printers have different tolerances, we aimed to make a set of files that works on the maximum number of printers but your mileage may vary.
Not compatible with other Hercules controllers except the DJControl Inpulse 200/300 series.
We added the .step file with minimum requirements for easier modeling
Safety tips:
IMPORTANT: BE GENTLE when removing and putting caps back on.
You may need to use a small plastic card or tool to lever them off and remove your original caps. A bit of lube may help the installation.
Do not perform any lateral movement with the caps under any circumstances.
Customize at your own risk!