EC11 Rotary Encoder Knob - Spurred
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Super simple knob for EC11 style rotary encoders
- Ocena
- 4,75 / 5
- Polubienia
- 24
- Pobrania
- 252
- Wydruki
- 3
- Wyświetlenia
- 2017
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Edit 22/27/07: Added updated files. Remade the design to be a little nicer on several different layer heights. Also added a “snug” variation of both versions that has a 6.1mm hole vs the 6.2mm default hole.
Simple knob for an EC11 style rotary encoder. Made for the serrated shaft not the flat-sided one. Decently snug push fit that may need very slight scaling depending on your setup. This is not meant to fit next to other keys or encoders on a standard 19.05mm grid, it's meant to be used either on a lone encoder or one sufficiently separated from other components.
Picture samples were printed at .3mm layer height, 3 floors/roofs, 2 walls, 10% infill.
Requires no supports and is oriented for printing already.