Counting matching models…
I tried to use @kulfurst Nintendo Switch Horizontal Flip Dock , but found that it doesn't fit the Ethernet version of the dock that is included with the OLED Switch. I redesigned the stand to fit the Ethernet dock from scratch, but…
A universal component for mounting power banks or other accessories using 3M VHB tape or Magsafe Magnetic rings. You can also design Velcro fastening openings based on this component. Download the .STEP file to create your own accessory.
This is an adapter plate to retrofit a single DIN sized head unit into a vintage aircooled VW with dash trim. When I got my '74 Type 1 a couple years ago it came with a hacked up dash with a CD player shoved in it. I could have welded in…
This is a 3D reference model of a 128×64 SSD1306 OLED display module, designed to assist with accurate placement and fitting in larger assemblies. The model captures the overall dimensions, mounting holes and pin header position commonly…
This is a LEGO compatible brick designed to look similar to the smaller LEGO computer brick but sized to hold a .96" OLED (128X64 Pixels) which can be controlled through the I2C port of any microcontroller. They are easily available…
When I found out about Trick Laser's nifty ball-cup Kossel arms with plastic barbells to guarantee arm spacing and reduce joint lash (see http://www.tricklaser.com/ ), I was immediately intrigued, but I needed an effector to use them with…
Tastatur/Maus/GamePad-Emulator mit Raspberry Pi Pico und CircuitPython, Cherry-Switches, Jogdial-Mausrad, Synaptics-Touchpad und OLED alle Infos unter…
Modular 10" Server Rack! - Mod10 Top / Bottom Connector Holed for cable manegment https://www.printables.com/model/1225
LoRa APRS Case for 2.4" OLED version 1
Previous models people have “drilled” into the case to run wires wherever they may. That seems unfinished to me and I do not want a loop of wires hanging out the side or wrapping around. -Supports 100% of the time ONLY for the OLED…
This is a remix for the BLV mgn Cube. Some Parts of the X-Carriage are changed to mount a chimera+ watercooled version. You have to reprint the Rear Plate, the Front Plate, the Bottom and the Twin Blower Shield. Everything is kept quiet…
The linked wireless charger (https://chargie.org/product/chargie-supercooled-wireless-charger-us/) comes with a mount designed for car air vents, which works well for that purpose. However, this setup is not practical for home use, as the…
A simple v6 cooler. Can hold a can in each “cylinder” and one in the ice chamber. Plenty of space in the middle for sandwiches, and about 7lbs of ice. I designed a V8 version for my dad but it could only use narrow cans to fit on my…
Arcade For Switch Mk1 and Oled With Buttons Board /!\ The plate 4 is for the non Oled version /!\ Print on place , 15% infill , no supports required. Add with Board Buttons Please clean your Bed thoroughly and check that it fits properly.…
I created this since I am building my own custom keyboard based on a combinations of Totem , TBK Mini and juriform36 😎
Slight remix of @B4rt0's LG C2 42" risers. This model has a 50mm rise to accommodate slightly taller soundbars, and chamfered edges for a different look. Due to the increased 10mm rise, the bottom flares out for extra stability.
This is a direct edit of the “__raspi_module_1_01-SIF_OLED.stl” module from the Modular Snap Together Raspberry Pi Case , and the only things i changed is 1: I made the OLED cutout bigger to allow you to mount it forwards or backwards,…
The Mettler-Toledo postage scales have four "arms" that the weighing platform sits on. Each arm has a plastic/rubber bumper piece, which sometimes can break off or be missing. Instead of finding a replacement, just print one! To use,…
The model allow mounting a lightbar or a webcam on OLED monitors with 5 mm thick screens, with a curvature of 1800R. Printed in PLA, no special features needed.
boitier pour écran OLED 128 x 64 1.3 inch poussé l'écran jusqu'au fond du boitier pour le clipser pas besoin de vis
Make you robot more visual and animated with this great OLED display you can add it in front of Otto as a mouth to display variables, numbers, messages, sensor values, icons. It could also be adapter as a replacement for your robot eyes.…
A housing for the cheap 1.3'' OLED Display (SH1106) with Encoder EC11 like you find them on Aliexpress: https://s.click.aliexpress.com/e/_c37Z1MCx The housing is designed to take up the least amount of space. It is designed to work with…
Only suitable for updated display models. Only the black board is suitable. The blue board is not suitable.
These little OLED displays are super-useful. But mounting them into an enclosure means cutting a really neat rectangular hole, which I find slow & tiresome. This bezel holds the entire module on the outside of the enclosure, and fits with…
All smthng display housings for GaggiMate: https://www.printables.com/@dubios42/collections/2861668 Support my work: https://ko-fi.com/modsmthng Latest update (12 June 2026): Reduced the screw hole diameters, increased the wall thickness…
All smthng display housings for GaggiMate: https://www.printables.com/@dubios42/collections/2861668 This is a remix of the version for the LilyGo 1.75 Amoled real pictures. The basic housing fits very well (Var0 and 1). The individual…
Samsung OLED TV Remote Control Holder The remote control is lightweight, so good quality double-sided tape is all you need to mount it. I recommend using variable layer heights for printing to create nice curves.
un remix de ce support a raspberry Pi 3/4/5 rack 6in avec un écran oled 128x64 remix de https://www.printables.com/model/1173903-raspberry-pi-2b3b4b5b-6-inch-rack-mount/remixes et…
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl This set is designed for breadboard-based prototyping with Arduino and ESP32…
More details, wiring instructions, and firmware configuration examples are available on my blog: https://tech.lugowski.dev/guides/smart-oled-remote/ PCB and parts kit for this project is available here . This project was born out of…
Printed in PETG on heavily modified ender3v2 using klipper.
If you drive a Seat Altea, you know the struggle: there’s plenty of space, but nowhere to put your phone. The interior is full of those early 2000s "bio-design" curves-everything is rounded and flowing, while modern phones are flat and…
A small part inserted into the eXtremeRate Joy-Con shell D-Pad and makes it feel like the one in 3DS. This prevents the possibility of pressing all directions at once. Cutting out a hole in the rubber gasket is required. Print in the best…
The changes I made: Rotated the board & moved the USB port to the side instead of the top. (edit, both top and side versions are available) I used a 1.3 OLED instead of 0.96 (pls excuse my old eyes). Widen the case size (width and…
This adapter is fitting cheap SH1106 1.3" OLED display bought on Aliexpress (dimensions on 3rd picture) and encoder with thread (up to M7). Screen requires 4 M3x4 screws to fix.
Print with tree supports from the build plate. If you want more colors, adjust the print order by objects. No need to glue anything or use screws. PLA, 0,2 layer recommended
Update: 4/07/2026 Alert! PRO Version 2 Incoming: For anyone looking to build the PRO, please wait, I have Version 2 in coming, its fully complete, and much better than the first version, the case is now unified and supports…
Simple Case for Waveshare_ESP32-S3-Touch-AMOLED-1.75-G to protect module during testing openings for screws, USB-C, reset and boot, 8-pin header, but not for sdcard
Title says it all. I recommend printing this mount in PETG with 100% infill.
This removable water-cooled 45 mm blade guard is designed for the Proxxon LWB to make cutting cleaner, more controlled, and more practical in real use. What it does guides cooling water directly into the cut helps cool the blade where it…
ESP32-C3 OLED Development Board - HiLetgo 3pcs TP4056 Type-c USB 5V 1A 18650 - DC 3.7V 3000mAh 974058 - Chanzon SPDT Mini Micro Slide Switch SS12D00G 1p2t 2 Position 20pcs - Portable device print. What do you want to do with it ? Portable…
even without screws, it holds on pretty well :) you can add a piece of acrylic to the front to give it a more professional look
I've created this in first way to protect the thin cable at the backside of the display. you will also need: 4 x M3x10mm allenhead screws 4 x M3 nuts Print Settings Printer: Prusa i3 clone Rafts: No Supports: No Resolution: 0.1 mm Infill:…
This is a 3D reference model of a 128×64 SSD1306 OLED display module, designed to assist with accurate placement and fitting in larger assemblies. The model captures the overall dimensions, mounting holes and pin header position commonly…
Features and Functionality (updated 2026-05-08) v1.0.0: Added functionality: It is now selectable to run the heater (CYCLING) and get it controlled either by Temperature or by Humidity. When temperature has reached the target setting it…
Darksoft Sega ST-V Dark Knight Multi OLED Selector Cart Slot Mount for Lions3 acrylic case (by Clint Kolodziej) This is a case for the Darksoft Sega ST-V Dark Knight multi's OLED selector, designed to attach to the cartridge cutout on the…
This is a sleek Wii & WiiU sensor bar holder that is almost invisible. It blends the sensor bar with the TV. It uses the slot underneath the sensorbar and latches onto the tv. There are multiple versions fitting to 5-10mm thick screen…
Print two, slide over the ends of the dock and stick the flat side.
This mount sits on a PBC and avoids the circuitry on the bottom side of the OLED board to give it a firm mounting to the board without having to use brass standoffs. You can either screw the oleds down with m2 screws, or slip a segment of…
Modular 10" Server Rack! - Mod10 Top / Bottom Connector Holed for cable manegment https://www.printables.com/model/1225
📟 Overview A clean and compact parametric enclosure for 0.96" OLED displays (SSD1306 type). Designed for embedded and IoT projects where you want a professional-looking output device instead of exposed electronics. 🧠 Why this exists Most…
I really like the simple, compact design of the Nitrox Analyzer by Tony Land. However, it wouldn't work with any OLED displays currently sold on Amazon. The OLED display glass is larger than the cutout. It required too many modifications…
I tried to use @kulfurst Nintendo Switch Horizontal Flip Dock , but found that it doesn't fit the Ethernet version of the dock that is included with the OLED Switch. I redesigned the stand to fit the Ethernet dock from scratch, but…
case for the SSD1306 OLED display. after inserting the display, heat and press the 4 pins to lock it, or glue it use supports only from the print bed for the screw holes post a make!
UPDATE 09/2024 Add new version V8 for G93SC and G93SD with monitor clip. You can clip this version to your monitor without additional tape. Would be nice to get feedback for G95SC. Add new version V5 to fit G95SC. Description This is my…
Tisk z ABS dnem dolu, následně vybroušeno do hladka.
I added an OLED module to my Keychron Q6. Since it is using QMK, it is easy to customize it. I added a guide as a PDF that should have all the necessary information to build one yourself.
MODCASE 3D 13.3L is a fully 3D printable PC Case with advanced customizations. Instructions Here This is a standalone version of the original MODCASE 3D for Printables. It includes the 13.3L case plus all of its MODs and optional…
When the printer and the camera asks more of your Raspberry Pi and its temperature rises, you'll have to cool it down to prevent throttling. So if you got a spare 2510 fan laying around like me, you can use it for cooling your Raspberry.…
A small case specially made for a 128x64 OLED screen and a D1 Mini. The OLED is fixed with a small bar on the back (no screws). The front and the back can be inserted without glue. USB port of D1 Mini is accessable from the back. The D1…
Seat Toledo 2001-2004 keychain, car have 6 cm/2,362 in width, 0,5 cm/0,197 in thickness. I recommend to use ironing. The best way to attach keyring is by attaching it to one of the wheels. Have fun :)
No supports needed, but you'll need a big printer. Holds a Nintendo Switch OLED + dock + joy-cons with slots for all cables. Attaches to VESA 400 mounts.
This is a case for the PI-kvm v2 (Raspberry PI 4) with HDMI to CSI converter. It is based on this case, from which you need to choose and print the bottom half of the case: https://www.thingiverse.com/thing:3723561 This exact HDMI to CSI…
A modified Steam Deck charger cable organizer that allows the use of a US-EU adapter.
Remix of https://makerworld.com/en/models/16169#profileId-57570 for the Samsung Odyssey OLED G8 curved monitor. Tested with an iphone 15 pro
You may need to do some trimming around the screw holes to get it to fit right.
Passend für: Gehäuse: https://www.amazon.de/gp/product/B00W7S1BFG/ref=oh\_aui\_search\_detailpage?ie=UTF8&psc=1 Display: https://www.amazon.de/gp/product/B01M9JVYIS/ref=oh\_aui\_search\_detailpage?ie=UTF8&psc=1 Vorbild und Software:…
After trying other models designed for the Corne keyboard, I felt like they weren't fitting the Chocofi as well as I hoped. So I decided to design my own 😄 I used the Chocofi case v1 as reference to design this: And then used my own…
A simple v6 cooler. Can hold a can in each “cylinder” and one in the ice chamber. Plenty of space in the middle for sandwiches, and about 7lbs of ice. I designed a V8 version for my dad but it could only use narrow cans to fit on my…
A bracket to mount your Nintendo Switch docking station to the wall. OLED version
PET-G, wall loops 6, top shell layers 6, bottom shell layers 10, infill density 15%
Tri-Bahtinov Mask for C8 and Edge HD 8 Hyperstar with cooled ZWO/OGMA/Touptek 80mm diameter camera This Tri-bahtinov mask will fit C8 or Edge HD8 in the Hyperstar configuration with out having to remove the camera. outer diameter is 203mm…
Overview video for this sensor: https://youtu.be/VefbT6RuT-4 Build video (part 1 - hardware): https://youtu.be/fA91LcJRbhI Build video (part 2 - software): https://youtu.be/uDsnqi1Vl4U Build video (part 3 - openHAB):…
BigBox Water-Cooled Titan with MGN12 Linear Rail. E3D Shopping List. 1 x Water-Cooled Titan. 1 x Volcano Starter Pack . 1 x 40x40x20 Blower Fan 24v . 1 x 16T GT2 Pulley . 3 x Metre GT2 Belt . Print with your favourite thermoplastic |…
Arcade For Switch Mk1 and Oled With Buttons Board /!\ The plate 4 is for the non Oled version /!\ Print on place , 15% infill , no supports required. Add with Board Buttons Please clean your Bed thoroughly and check that it fits properly.…
I used the file for the front cover and modified it to fit the 1.5 OLED display: Yellow 128x128 OLED Module SPI I2C Arduino,Raspberry Pi 1.5" inch ER-OLEDM015-3Y-SPI-I2C from buydisplay.com.
I made my own Corne keyboard, full with oled display, but found the display part way too flimsy, just floating around protected only by a also floating and flimsy acrylic strip. This is a bumper, it replaces the brass spacers with a…
A wallmount bezel for the Wemos 0.96 OLED display. It also includes a space for the SHT30 temperature and humidity sensor. Display should fit snuggly, but install carefully. sometimes the very thin glass is not mounted 100% square and can…
This is a slim compact case for a SSD1306 I2C 0.96" OLED Display Screen. The case was designed based on the measurements of this model I ordered from AliExpress. Other boards do vary slightly, and the model's clearances are very tight. A…
A spool for the Steam Deck charger that doesn't require any supports by working around a 3D printers strengths. Just enable brim (important as the sides will tip otherwise before bridging), disable infill and print from the spool up. It…
Compatibility: This case design is compatible with Raspberry Pi's 2B/3B/3B+/4. It may be compatible with other models, however, these were the ones I was personally able to test it on. Two Top Depths: (01/06/2022) The top half is now…
Custom made screenbar halo mount. Added felt tape for added scratch protection as well. Print on its side for strength.
smily77 made one of the smallest best looking cases for Wemos D1 mini projects with an oLED. I made a few improvements to make it even more awesome: Display snaps into place (0.96" 128x64) Holes for a screw and cables to top-mount a…
PIKVM case supporting the Raspberry Pi4, USB-c power/hid splitter, RJ45 ATX connector, and a 0.96" OLED display
This is a beautiful looking christmas tree ornament, perfect for christmas and winter time. Thank you for your interest! Feel free to share your prints or print files with the community! Design by pmoews, downloaded from Thingiverse here:…
I loved the switch Skadis mount by @AliceGreen_1829678 , but I have a Switch OLED, which has a slightly wider dock. So, I loaded the .step file provided by Alice into Onshape to make a small change. The result isn't perfect, as I didn't…
