Otto DIY Smart OLED robot
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.97 – €1.18 net (excluding VAT)
For file: Ottoexpand_Smart_0.28mm_PLA_MINI_1h0m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.07 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 1 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Otto is modular, so you can add this OLED + Temperature and humidity sensing.
- Rating
- 5 / 5
- Likes
- 55
- Downloads
- 2,107
- Makes
- 4
- Views
- 8,333
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
Make you robot more visual and animated with this great OLED display you can add it in front of Otto as a mouth to display variables, numbers, messages, sensor values, icons. It could also be adapter as a replacement for your robot eyes.
Features
- 🌡 Temperature + 💧 Humidity sensor
- 👇 Touch interaction
- 🖥 OLED mouth display
- 👩💻 Simple Programming with Otto Blockly or Arduino
- 📃 Instruction manual included
- 🔌 Integrated USB charger
- 👣 Walks & dances
- 🦇 Avoids obstacles
- 🔊 Makes emotional sounds and melodies
List of Parts
- 🖥 Otto Nano Microcontroller + I/O board
- 🔌 Micro USB cable
- 🔋 Rechargeable battery.
- 📃 Printed Instruction Manual
- ⚙ 4 x micro servo motors with set of screws.
- 🦇 Ultrasonic sensor
- 🔊 Buzzer
- 🌈 10 x DuPont cables
- Phillips screwdriver
- Touch sensor
- DHT Temperature and humidity sensor
- OLED display with a resolution of 128 x 64 pixels
- 3D printed Expansor
- 3D printed OLED mouth holder
- 3D print the biped parts : Otto DIY biped| STL files |
Instruction Manuals available to download in the files tab.
We invested lots of time and resources to provide open source code, software and hardware, please support this project by just giving us a ❤ Like and share and you are welcome to be a part of this friendly community of robot builders, teachers and makers.
Join today our Otto Builder community