1 / 3
Wemos D1 Mini OLED Mini Cube Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
smily77 made one of the smallest best looking cases for Wemos D1 mini projects with an oLED. I made a few improvements…
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 52
- Makes
- 0
- Views
- 851
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
smily77 made one of the smallest best looking cases for Wemos D1 mini projects with an oLED. I made a few improvements to make it even more awesome:
- Display snaps into place (0.96" 128x64)
- Holes for a screw and cables to top-mount a temperature sensor (BME280)
- Mounting for two 6x6 buttons that are press-fit into the case
Additional lip on the board tray to prevent it from coming loose Printing:
Print the case with the front down (no supports needed)
- Print the tray on its side with supports on build-plate only
- I've had good results with 0.2mm for PETG
Category: Electronics