different housings for GaggiMate Waveshare S3 AMOLED 1.75 inch, smthng housing 4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Minimalist housings for the Waveshare S3-AMOLED-1.75 and GaggiMate
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 333
- Makes
- 0
- Views
- 1,665
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
All smthng display housings for GaggiMate: https://www.printables.com/@dubios42/collections/2861668
This is a remix of the version for the LilyGo 1.75 Amoled real pictures. The basic housing fits very well (Var0 and 1). The individual variations have not yet been tested in detail. Feel free to share your experiences on the GaggiMate Discord.
I have created various housings, which you can find here. The first two are the easiest to modify.
Var0: simple housing
Var1: with hole for plug
Var2: top mount for Gaggia Classic and Rancilio Silvia (Please note that if you are using the Waveshare, you should carefully examine the images beforehand, as you will need to bend a connector yourself. Alternatively, you can use variant 5, which has a longer holder, so you don't need to bend the connector.).
Var3: same as variation 1, but with slanted bottom so that the display can be used as front mount, for example
Var4:Top mount with more centered seating, slightly more difficult installationVar5: Easier to install top mount for Waveshare <-- recommended for quick installation
Screw that works:
Use short M2 screws, approximately 4 mm long.
How to print
Print orientation should match examples on last picture
Print with a fine or variable layer height for the best result
Use brim for Var2 housings
Optional: use "paint support", if you have problems with adhesion:
Use support for Var4 housings
Var5:
