C270 / C310 Focus Ring + cover with leds and microphone holes
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.50 – €0.61 net (excluding VAT)
For file: C270 - FocusRing.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.55 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 39.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a remix of a remix (Scatterthought) of a good Logitech C270 Focus Ring design. I just add my contribution ;)
- Rating
- 4.875 / 5
- Likes
- 28
- Downloads
- 301
- Makes
- 10
- Views
- 1,428
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
1. Introduction
This is a remix of a remix (Scatterthought) of a good Logitech C270/C310 Focus Ring design. I just add my contribution ;)
-Tighter tolerances between ring and cover.
-Change the “gear” design to better grip the lens.
-Change ring internal angle and depth to rmove any gaps between the ring and the lens to avoid dust inside the cam and around the lens.
-Add holes for the microphone of the webcam
-Ad hole for the green led of the C270/C310 to be visible when running.
2. Revision History
| Version | Description | Date |
|---|---|---|
| A.1 | Initial Release | 20/09/2023 |
3. Printing Instructions
- All elements
- PETG.
- Layer Height: 0,2 mm
- Min 2 perimeters
- No supports
- Min 20% infill
- Infill Pattern: Gyroid
4. Materials for Assembly (BOM)
- The printed parts
- Your C270 webcam
- A mallet / rubber hammer
5. Assembly Instructions
- First, you need to disassemble your logitech webcam. Follow this tutorial: Logitech c270 focus adjustment - YouTube
- Fully insert the ring into the cover. You have to press hard ! A mallet or a rubber hammer can help but pay attention to not break the parts ;)
- Place the cover and the ring onto the cam. Carefully clip the ring onto the lens gear. A gentle push to have the “click sound” should be sufficient.
- Screw the cover. DON'T OVERTIGHTEN as you will not be able to turn the ring anymore.
5. Notes
- G-code file only made for MK3S+. The file contains some custom lines to add a pre-heating before the printing to avoid oozing during the mesh bed levelling. And a timer at the end of the print to buzz a sound once the parts has cooled down.
- Do not use the g-code file on other machines than MK3S+ ! In any case, I recommend you to slice the .stp files by yourself to make your own g-code files.
Have a nice print !
Last note! I've spent quite a lot of time designing, iterating and prototyping on all my models. Therefore, if you enjoy them, please don't forget to like+download and then rate them, so that I can earn so prusaments to continue ;)