1,090 models
I've created this nema 11 stepper motor mount for my ASKAR FRA 400 telescope. I give as well my dew shield for this scope. You have to found the adapter piece (coupling) 2.5mm to 4mm (stepper to focuser) as I've not designed myself.
Print approx. €5.97–€7.30 excl. taxPreliminary estimate for PETGSource material: PET
A screwdriver for removing the focuslens on an Aeon Nova 14 lasercutter. May fit others. Print instructions Category: Hand Tools Summary A screwdriver for removing the focuslens on an Aeon Nova 14 lasercutter. May fit others. Print…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant
Print Information: Printer: Prusa-Mini Filament: PRIMASELECT PETG Transparent Black Nozzle: Bondtech 0.4 Layer high: 0.2 Infill: 50% cubic Rafts: No Supports: No Gedruckt wird flach und nicht hochkant. Zum kleben verwendet man am besten…
Like the original model, print both of these (I used PETG) and line them up with the cutout for the parcel cover's rear perch. Line them up, drill a hole suitable for an M3 screw, insert M3 screws and nuts and tighten. Works just like the…
Brackets for replacing the base radio with Sync 3 in third generation Ford Focus. Might work with MFT/Sync 2. Designed for 2012 Focus that originally has two line single color radio system. Print in ABS only! Car and APIM will get really…
This mod is an upgraded mainboard cover for the Qidi Plus 4, designed to optimize airflow and cooling with an 80mm fan. Its focused ducting system enhances heat dissipation efficiency, keeping internal components at optimal temperatures.…
The brackets of our Focus Thron2 eBikes broke and I needed a replacement. The bracket comes with a small slot to guide the cables through so you just need a few minutes to replace it without disassembling the plug. Use a knife or gentle…
With numbers which makes them easier to identify, especially at night. I printed my set from PETG, 4 perimeters, 100% infill. Might need a bit post processing to touch up any PETG stringing and smoothen the numbers.
This is a remix from https://www.thingiverse.com/thing:4967196. I have added a hole for mounting a ZnSe Focus lens in to this lens cover. Drop the lens into the hole & lock it with a clip. I printed everything in TPU except the Clip which…
This is a manually operated macro rail to assist with precise image capture for focus stacking in macro photography. The winding mechanism has a metric thread with a 1 mm pitch, so a full turn of the knob advances the camera by exactly…
Definitely not perfect, but it at least fit my broken part to start with. Will look to improve if it doesn't work for a while. This should work on any Mk1 Ford Focus Hatchback, at least the North American versions. B4V0A and POM are…
There are two ways to focus your OMTech Polar: Subtract the width of your material in mm from 17mm, then set a z-axis offset in LightBurn while making sure you home the laser lens before each print - WHAT A PAIN! Install an external Ruida…
This model converts a Sirui 1.25x Anamorphic Adapter to a focuser for vintage anamorphic adapters. This focuser is tested to fit the following anamorphic blocks: Schneider ES Cinelux ISCO Ultrastar Moller 32/2x with included focuser…
AUX cover button for Ford Focus mk2. I have printed in PETG, PLA warps in summer heat
Charging socket Bosch Smart Code: 998018800
Clamp on gear for the focus ring of AF Nikkor 85mm f/1.8D prime lens. Gear meshes with 0.8mm module gears. Inspired by the Nikon 50mm (https://www.printables.com/model/227165-nikon-50mm-focus-gear)
Remixes the main knob so it can be slip-fitted on a skywatcher ST80 stock focuser knob. If you want truly smooth operation , see the anti-wiggle needle mod here :…
if you need to change the size of your lense STEP file available → here For the lens adapter, I'd recommend printing a layer height of 0.15 or less Logitech 270 webcam wide lens adapter with manual focus function
I wanted better fine control on my Lunt LS50THa with the feathertouch focuser, so I developed an oversized control wheel. Installation requires a 6 or 8 mm M3 grub screw, or any M3 screw at 12mm or greater. Simply remove the factory focus…
Desktop stand - 30-degree tilted version for Focusrite Scarlett Solo 3rd Gen. Second, Smaller version: https://www.printables.com/model/1794623-focusrite-scarlett-solo-3rd-gen-hellraiser-v2 Cutouts: For 2 large jacks and thick cables For…
(new better version i made) https://www.printables.com/model/1384022-seeed-wio-tracker-l1-e-ink-reference-case-made-usa i crudely extended the seeed studio case to fit the makerfocus 3000mah battery, use the front pannel from the orginal
Print face down, no adjustments to model should be necessary unless your printer requires them.
This is a 1U rack mount for a Focusrite ScarlettSolo 3rd Gen audio interface along with a fan controller found on Amazon. You will need to take the rubber feet off the bottom of the audio interface for it to fit.
Easy to print cake topper. Do a filament swap around layer 18 to make the surface color pop.
MTB Frame Guard Focus Jam
ENGLISH: Finding GU10 LED lamps that also have a narrow focus for accent lighting with good colour temperature and colour fidelity and good dimmability is very difficult. I gave up at some point and designed these focus rings for myself,…
Stiff and simple mount for ZWO Focuser for Askar 600 astrograph.
This is the autofocus Button which is on the side of the most commonly used document cameras (overhead cameras) in schools from Elmo.
Recommended to print with 100% infill with large face down. No supports necessary.
This project ist based on Dark Sky Geek's excellent ASCOM OAG design (https://github.com/jlecomte/ascom-oag-focuser). I redesigned the mechanical parts to better fit my astophotography setup and to make the build easier. To print the…
Phone was constantly sliding off the wireless charging spot and stopped charging, so i made a bracket! Compatible with non-Max iPhones including case. Pictured is an iPhone 17 with Apple Silicone Case. For Ford Focus fourth generation…
This is a blank plug to cover up the connector to the OEM active exhaust controller. You will need at least a 1k ohm resistor plugged into ports 1 and 2 of the OEM connector. This was printed in PETG with support.
You bought an autofocuser. It came with a bunch of couplers to mount it to your focus tube. But you only need one, and now you want to store the others. Store them with gridfinity!
I got a 2x T-Adapter Microscope Lens for my Mirrorless camera and wanted to mount it to my trinocular microscope. I couldn't mount it to the existing hole as I couldn't get it to focus while mounted, so I had to make an extension tube to…
Simple bracket that slides over the material of the shelf when the original bracket has broken off (common) I found the others to be too difficult to fit and cumbersome. Slide the bracket over the material of the parcel shelf with strong…
This model was developed to replace the Askar 91F fine focus knob. We have printed this in PC CF filament and managed to also screw the original setscrew in place with enough force for it to work perfectly instead of the original fine…
Ideal for more permanant installations to reduce cable clutter. Designed with short right angle male to female connectors in mind. The version with_slot adds an additonal cable slot to route cables, e.g. keyboard/mouse usb under the unit.…
I would recommend ABS or ASA, as the part is exposed to direct sunlight and therefore heat. layerheight: 0.2mm infill: 20% (gyroid) wall loops: 4 top shell layers: 5 (cause we need a little bit extra material for sanding)
Easy to print cake topper. Do a filament swap around layer 18 to make the surface color pop.
Update (04/05/26) - fixxed eyetube on very short version to have the thumb screw m4 insert hole in the correct place. Update (01/05/26) - Added new very short version for the Travel Telescope V3.0 only (due to the mounting points being to…
The Focusrite Scarlett 2i2 (4th gen) has a circular volume LED around the input 1 and 2 inputs. At the time of this file's creation, there is no software solution for disabling it. This knob was designed to block out that light. This knob…
Astronomical telescope dual focuser 4:1 knob v2.0 For M4 steel shaft. < Filament > anything. < BOM > 676zz(mr106) 2ea 6704zz 1ea M3 hex sockethead cap screw 20mm 3ea M3 hexagon nut 4ea M3 socket set screw 8mm M4 socket set screw 8mm M4…
ENGLISH: Finding GU10 LED lamps that also have a narrow focus for accent lighting with good colour temperature and colour fidelity and good dimmability is very difficult. I gave up at some point and designed these focus rings for myself,…
I thought that the focus knob was to small so I threw this together to fix that. Will fit any microscope that's around 33mm. Total diameter is around 70mm. Has holes for two 4mm bolts to hold it on. printed in regular pla with 5 walls.
Since the LiDAR Unit doesnt come with a Cover for protection when mounted on a Rig, i decided to design this one for it. No extra fastening, sits firm Spacing for foam rubber for better protection Fits when mounted on standard LiDAR…
This is my 3rd version of an adapter to fix the crappy focuser on the Heritage series of Skywatcher Telescopes. This one uses the existing threads of the helical focuser instead of V2 which used a press fit, and in my case, epoxy. V3…
Experience the ultimate in track performance with this 3D printable STL model of the Mercedes-Benz AMG GT Black Series 2023. This track-focused supercar model is perfect for automotive enthusiasts seeking to display the aggressive…
Ford Focus RS Mk3 Keychain A 3D printed Ford Focus RS Mk3 keychain , designed for true performance car enthusiasts and Ford fans. This model captures the aggressive look and spirit of the modern RS — a perfect addition to your key set or…
I make no promises or guarantees, use at own risk and try not to break any of the plastic pieces of the assembly or center console while removing or reinstalling. Made to fit my 2002 ZX5 Ford Focus, will also fit my 2010 ZX2 Ford Focus.…
Focus gear adapter for Meyer-Optik Görliz Telemegor 1:5.5 / 180 mm . It is recommended to print it out of flexible filament (e.g. TPU ). The inner gear totally reflects the lens focus wheel, the output gear is on 0.8 (module) standard for…
This is the air vent frame for a Ford Focus Mk2. The rear tabs are missing and must be glued on. ATTENTION!! The legs in this model are not 100% compatible. There are variations.
This follow-focus speed crank works fantastic! Make sure to CA glue the knob to the handleshaft. There is a print-in-place ball bearing inside the crank lug. I recommend printing the threaded handleshaft vertically using a super wide…
Note: I've added another version of this mod that doesn't require cutting the focuser tube, but adds an additional 5mm to the length. The adapter is called no_cut_m58_focuser adapter. This is a set of adapters to add a 25-55mm helicoid…
Phone was constantly sliding off the wireless charging spot and stopped charging, so i made a bracket! Compatible with non-Max iPhones including case. Pictured is an iPhone 17 with Apple Silicone Case. For Ford Focus fourth generation…
Description Table of Contents Model overview Parts used Printing Assembly This is a case for the Wio Tracker L1 from Seeed Studio which can fit a 3000mah LiPo battery with the measuring 67.5 x 36 x 10,2 mm. Makes a good standalone…
Supporto per scheda audio Focusrite 4i4 3rd gen, consigli riempimento 30% almeno. Possibilità di inserire il supporto sotto una tastiera.
A quick remix of the awesome work done by PapaSpiro to fit the NexStar 6SE. I've included a small test model so that you can see if the bolt pattern lines up with your mounting holes. UPDATED: I was running into issues with the 28BYJ…
Recent updates 2026-02-23 : Fixed mistakes in the model. Uploaded new versions of both front and rear parts. 2025-02-12: Added flat sections on the curved front face of the " FSX Focusing Screen Rear " for a purpose of attaching decals…
Plastic style: To be printed in a non-brittle, non-warping material, PETG and PLA+ are perfect. On a good 3D printer with a good precision ... A millimeter must be a millimeter ! Print your tabs, along with the nut and bolt. Don't rush;…
Mamiya Universal Focusing Screen to babygraflok Conversion
This is a version of the RP_Focuser_Tight_Inner modified to be compatible with the alternate collet , simply because I liked the collet, already had it printed and did not want to use setscrews to keep the eyepiece in place. Make sure to…
Replacement bushing for the IB5 manual transmission, used in various Ford models such as: Focus, Fiesta, Fusion, C-Max, etc. Designed as a direct replacement for the gear shift selector bushing, which commonly breaks over time and causes…
This tray holds and displays the Joint and Heroic Focus cards for the board game Voidfall. The objective in the design is visibility, saving table space, and ease of setup and storage. The available three Focus cards are displayed…
Set of gears that friction fit to the lens. Made to fit the Tokina AT-X Pro 28-70mm F2.8
Set of gears that friction fit to the lens. Made to fit the Tokina AT-X Pro 11-20mm F2.8
Simple under desk mount for the Focusrite Scarlett 4i4 4th gen. Needed parts: either the ventilated or the unventilated main body the front plate 2x either the big or small screws Additional parts needed: 4 wood screws for attaching the…
The subject of the project is an upgrade that changes the way lenses are secured in the focuser. Instead of locking the lens directly with an M3 screw, I have implemented an indirect locking method, similar to that used in focusers with a…
Super basic laser focusing screen to set your laser proper distance for optimal operation. I bought my laser used and it
Important updates 2026-02-27 : Got a new set of helicoid adapters and found that they have around 313 degrees of rotation compared to 167 degrees on my previous ones. So I added"extension" and "max rotation" as adjustable parameters to be…
Help your child discover the joy of reading with this set of three specially designed reading focus tools. Created for early readers, children with dyslexia, attention difficulties, or autism spectrum disorders , these simple but…
On an 8" Newtonian telescope I inherited and now use to do variable star photometry, there's a gap between the focuser and the telescope tube -- this focuser probably wasn't meant for this telescope. Not to worry, a 3D-printed part can…
Overview Designed for Starlight Instruments Focus Boss II by Optec. May also work with Optec FocusLynx but I don't have one to test with. The bracket is designed to attach the controller to a "wide" D-Series dovetail plate (NOT the…
Best in nylon for the threads, especially the internal threads for 2" filter
Make a statement at your next convention with this Bahtinov Focusing Mask, 8 Inch Telescope, Astrophotography Focus Aid Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
The Fractal Focus 2 case doesn't offer much in terms of 3.5" HDD mounting. I wanted to use that case for a server with a large RAID array. This project is the solution I came up with. BOM: (28) M3 heatset inserts (28) M3-8mm SHCS (2-4)…
It was made for the Hikmicro Alpex 4k, it might need some extra help and an extra screw for the leaver. Screw is an M6x1 with an square lock head, and should be about 55 mm long, something like the one on the photo. The whole thing work…
You will need a fiber laser cutter to cut the 1mm Inox gauge, and a 3D printer to print in PETG the support, 0.4 nozzle, 4 perimeters, 0.2 layers, support on the plate only ! printing orientation: square hole entry face the plate ! the…
a socket to replace the stock AUX port located in the glovebox compartment in Ford focus MK2. This has been made to fit with an AUX extension cable, to be connected to an aftermarket entertainment system. The main version uploaded here is…
This is a Panel cover for the Ford Focus MK2 (EU) with a slot for a USB Port (based on an Exibel USB extension cable). This is for the panel slots near the heater buttons below the AC Control unit. It might need a bit of force to push in…
Posted by request. A modified part to mount a GSO 2" EAF compatible Crayford Focuser, Manufacturers part number PAF-GS-N2-M-FRF-D-DW432. It also needs a base adapter for the focuser, the Agena Base Plate for 2" GSO Reflector Focuser -…
You bought an autofocuser. It came with a bunch of couplers to mount it to your focus tube. But you only need one, and now you want to store the others. Store them with gridfinity!
PIPA DEL LIQUIDO DEL SAPITO DEL FOCUS MK3 LO IMPRIMI EN PET G Y QUEDO PERFECTO La tapa tiene el tamaño justo de los tarros de cafe de dolca chicos
Inspired by Big Clive https://youtu.be/p1UIa8nRAgA Adjust the focal length of your cheap digital magnifier. I didn't need to open my magnifier up, the lens turned with careful torque breaking the glue seal. YMMV. Be careful, if you press…
(EN) This is a replacement bracket for the focus motor of the Wanbo Vali 1 projector. It is very common for the original plastic posts holding the focus motor assembly to break under the tension of the gear. Since the manufacturer does…
This model is designed for the William Optics RedCat 71WIFD telescope to minimize the overall size. The telescope, with the focuser attached, fits completely into the original carrying case. Additionally, the gear ratio 2:1 requires a…
Turn your smartphone into a dumbphone by gating time-wasting apps behind an NFC tap on this physical tag. Less than a dollar's worth of plastic, magnets, and the NFC tag and can be used with Free Open Source Software like Foqos, versus…
I got a 2x T-Adapter Microscope Lens for my Mirrorless camera and wanted to mount it to my trinocular microscope. I couldn't mount it to the existing hole as I couldn't get it to focus while mounted, so I had to make an extension tube to…
This is to hold the valve open on the AFE exhaust for the MK3 Ford Focus RS/ST. Printed in PA6CF to withstand high heat, no supports needed. Exhaust valve delete plug will be needed for the controller to avoid the 'exhaust valve…
This is a blank plug to cover up the connector to the OEM active exhaust controller. You will need at least a 1k ohm resistor plugged into ports 1 and 2 of the OEM connector. This was printed in PETG with support.
Most of the laser focus tools are centred around shorter gaps from the lens to the object. For my Omtech K40+, its 50.8mm lens system requires a 10mm spacer after the lens. This spacer centres 10mm (for fine detail/engraving), or above…
Stronger than before, and now printable with a 0.6mm nozzle! Still not quite as durable as a metal wrench, but plenty strong for the amount of torque you should be applying to light fixtures, and coming in at ~$1.50 each. Multi-color…
I made these models to use with MyFP2ESP32Focuser, a DIY focuser that can be used with NEMA17 motor Update (30th April 2026): I ditched the old design which still used the Crayford design and made the whole camera assembly slip under…
Design know superseded March 2024 This design has now been superseded by the Digital Bird Mark III design which can be found here: Mark III Latest Update 3rd Oct 23 Fixed a stupid error to parts 001_30_20mm Mot_RightH and 001_30_12mm…
I created this adapter to be able to use automatic focusing during my astrophotography sessions. A small Nema 17 motor is driven by an Arduino running Arduino ASCOM Focuser Pro2 DIY download | SourceForge.net and is controlled by N.I.N.A.…
Anello di supporto per tweeter per Ford Focus mk2/seconda serie Tweeter support ring for Ford Focus mk2/second series Category: Automotive
It is difficult to mount a focus motor on Lacerta Crayford focusers, because no free threaded holes available, but I figured out how to do so! This part grabs onto the housing of the focuser shaft, and holds the motor firmly in a very…
Customized version of http://www.thingiverse.com/thing:1060283 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1060283 Instructions Using the following options: BORE_DIAMETER = 66.7 NUMBER_OF_TEETH = 98…
