Clip for BFT LED IP67 Stripe (WS2814)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clip for LED strip from BFT. In my case, it is for a 24V IP67 strip with WS2814 RGBW LEDs, 60 LEDs per meter.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 61
- Makes
- 0
- Views
- 189
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I made a holder for my LED strips from BFT Lightning.
In my case, it fits the 24V WS2814 RGBW LED strips with 60 LEDs/m and IP67.
The LED tube sits fairly loosely in the holder, but it works well enough for my needs. The bar that holds the strip is also narrow enough that it doesn’t cover the LEDs on a 60 LEDs/m strip.
If you need a tighter fit, you can simply print the model 1-2% smaller.
The hole for the screw is vor a diameter of 3mm.
I’ve also attached a file where I printed the clip using my MK4+MMU3 with Prusament PETG.
Link to the LEDs I use
https://www.btf-lighting.com/collections/ws2814-12v-24v/products/ws2814-12v-24v-4-in-1-similar-sk6812-rgbw-pixels-addressable-ws2811-rgbww-rgbcw-5050-3pin-led-lights?variant=46031823503586