Rose Lights Adapter for Ledfyr LED lights
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.12 – €0.14 net (excluding VAT)
For file: rose_adapter_0.4n_0.2mm_PLA_MK4IS_9m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.13 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 9.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Adapter to make the rose lights LED diffusers fit the Ledfyr LED light chain.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 38
- Makes
- 0
- Views
- 439
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A small adapter to clip onto smaller LED lights/fairy lights/light chains that fit the beautiful rose lights diffusers from James Brown's Rose Lights.
Made to friction fit the Ledfyr LED lights from IKEA, slight adjustments in size may be needed since not all LEDs are exactly the same size (even on one light chain).
Print settings on Prusa MK4:
- 0.4mm nozzle
- 0.2mm SPEED Input Shaper
- 5% Gyroid Infill
- 2 solid layers at top and bottom to save on filament
- enable brim if needed, should stick fine to a clean bed
Uses about 1g of filament, prints in ~10min.
Filament in a light colour or one matching the diffuser's is recommended (model shown printed in Recycling Fabrik rPLA Flauschiges Schaf).