Rose Lights Adapter for Ledfyr LED lights
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to make the rose lights LED diffusers fit the Ledfyr LED light chain.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 438
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A small adapter to clip onto smaller LED lights/fairy lights/light chains that fit the beautiful rose lights diffusers from James Brown's Rose Lights.
Made to friction fit the Ledfyr LED lights from IKEA, slight adjustments in size may be needed since not all LEDs are exactly the same size (even on one light chain).
Print settings on Prusa MK4:
- 0.4mm nozzle
- 0.2mm SPEED Input Shaper
- 5% Gyroid Infill
- 2 solid layers at top and bottom to save on filament
- enable brim if needed, should stick fine to a clean bed
Uses about 1g of filament, prints in ~10min.
Filament in a light colour or one matching the diffuser's is recommended (model shown printed in Recycling Fabrik rPLA Flauschiges Schaf).