5 Zoll Simracing Dash - DDU Vocore Screen

Update, Dezember 2025

Thanks to @gerritkpunkt

for edditing the Case to fit the universal Magnetic Mount   https://makerworld.com/de/models/643295-universal-magnetic-mount-for-vi-ddus#profileId-2117855

DDU for your 5" Vocore Screen

What you need.

• Vocore Screen 5"    https://vocore.io/screen.html

• LED Stripe 144 LED / m  https://de.aliexpress.com/item/32682015405.html?spm=a2g0o.order_list.order_list_main.53.29085c5fItuAhv&gatewayAdapt=glo2deu

• Arduino Nano (Best USB C)

• USB C https://de.aliexpress.com/item/1005005844919041.html?spm=a2g0o.order_list.order_list_main.14.21ef5c5fIOUyZz&gatewayAdapt=glo2deu

• some Thread inserts M4, M3, M2 and screws

• wires

As usual, if you have any question, need some changes or got some ideas, let me know and post a make :)  

Print all parts in the color you want, except the reflectors for the LED.  You should print the closed side in white and the rest in black to prevent bleed through.

For beste effekt, print the Frontplane laying front down. You could use some carbon printplate etc.

First, you should bring in the thread inserts and wire the LED / Arduino in the Case.

You need 5 LED on each side an 16 on top.  You can center the LED strips with these reflectores above.   Take note, left and right is not symetrical due to the assymetric Vocore

Place the LED Stripes and Arduino in the case and lock the Arduino in place with the lid

Afterwards you could wire the Vocore with the external USB.  Screw the external USB onto the lid of the arduino and place tho vocore within the case.

Frontmounting,  place the LED top decals front the back in the topframe. You can use some glue, but it should hold up good enough.  Bring the topframe onto the case, place two m3 countersunk screws and you are good to go