Counting matching models…
A friend bought @Sam3DBox's 3-Spoke Steering Wheel and needed to connect it to the Moza Racing Quick Release, so I made this adapter for it. Added a tiny detent bump to make a bit more friction, so the steering wheel has a good hold but…
After upgrading my SR-P Lite pedals with a load cell I wasn't happy with how they felt with their smooth plates and shallow angle. I found some decent looking and priced pedals on Amazon and created adapters for mounting them in a more…
When installed on this adapter, the base will be angled at 7 degrees from the cockpit mounting plate. To lock the base in front, you will need M6x18 screws (I had them with washers), and M6x10 screws for the back (included with the base).…
After rescrewing the rod on the SRP brake for the thousandth time, I finally stripped the thread with some excessive force. Here's a replacement I quickly modelled up. Before you're worried, all the braking force will be handled by the…
Hello everyone, I am glad to present a random test model, which is also a tip for a bolt/stud M8. With this model I check the acceleration and speed of my printing, as well as the fracture strength by inserting a stud into the hole. Good…
A Moza powersupply holder for the HSW system. You will need 6 “insert-empty.stl” to attach the holder to the HSW: https://www.printables.com/model/152592-honeycomb-storage-wall/files
Modelled entirely myself, but mostly a direct copy in terms of dimensions. Throttle fills the entire pedal face now. I'm surprised how much grip the pattern gives. Made with a maximum of 30deg overhangs for better print quality. No extra…
Standard 370 motor has a length of 30.5mm a diameter of 24mm. Printed in PLA with whatever default settings. The motor is held with zip ties to the mount. That ensures that there is no play. The mount is attached to the pedal with 2 M3…
Simple Spacer for the NRG Style QR50 used at Simagic, Moza or VRS. Additional i added a cable clamp for an coiled cable Simply add the Spacer between the QR and your Wheel, to compensate for different heights of different steering wheels,…
Mounting plate for the Moza R5 wheelbase Inclination angle: approx. 6° What you’ll need: - 2 × M6 6×40 screws (for attaching the wheelbase to the plate) - 2 × M6 6×30 screws (for attaching the wheelbase to the plate) - Any suitable M6…
Compatible Products: MOZA R5 Wheelbase MOZA R9 Wheelbase MOZA R12 Wheelbase Required Hardware (Not Included): 4× M5 nuts 4× M5×40mm bolts 2× M3×25mm bolts 1× 120mm cooling fan (120mm×120mm×25mm) Installation Instructions: Step 1: Remove…
This mount helps to mount a Corsair Xeneon Edge display to a Moza wheelbase to use it as a dash for simracing. Requires 2x M3x10mm and 2x 10mm 1/4"x20 bolts (AV standard) to secure. The dovetail design allows for removal of the dash when…
Created this wall mount for Moza AB9 accessories. I had extra stick shift and flight stick that I wanted to hang it on the wall and this wall mount helps it organize it little better.
My printer was too small to print the whole wheel in one go. It won't fit a 256 x 256 bed. My brother helped me split the wheel in 2 in CAD with connectors that need to be glued together to make it strong enough. I've been using it for a…
I made a Moza HGP shifter adapter for the Playseat Challenge Universal Mount. There is an angle adjuster so you can make it parallel to the floor. 1) Print as oriented in model 2) Use 4x bolts, nuts and washers around perimeter. This…
This works flawlesly. you need just 2 pieces of D30mm x 10mm rubber https://www.kaufland.cz/product/435437096/?kwd=&sour
It mounts via 3 M4x35 Screws to the base using 3 threads in the base shaft. You can mount a custom wheel with a 70mm hole pattern to the adapter after pressing in the M5 nuts from the back. The lengh of the M5 screws can vary depending on…
This is a printable Stabilizer leg with optional Foot Rest or "Dead Pedal" that can be a great place to rest you feet if you don't have a clutch pedal or a mount for the pedals. No supports should be needed! The stabilizer can be…
3D printable topographic miniature of Beira - 🇲🇿 Mozambique Capture the beauty of Beira 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates -19.832, 34.842 (LatLng) .…
Bracket i designed to vertical fit my MOZA HBP E-Brake to my Playseta Challenge
An adapter to allow the self-cancelling function to work on the Moza Multi-Function Stalks when using a third-party wheel. This was designed to work with SimCore extensions and has been tested with the UH1-105 but should be equally at…
“Music is my weapon, but this rifle also helps.” Add a touch of classical rebellion to your collection with Mozart: Tactical Symphony. This highly detailed 3D model reimagines the legendary composer not only as a master violinist, but…
For installation use 2x countersunk (cone head) M4x16 screws, 3xM8 low profile nuts (DIN 439) and 3 long M8 screws provided with the Moza stalks. The auto-cancelling function works as well with this adapter. Just stick the provided…
Usually the Moza wheel bases must be mounted on the very front or back of the Playseat Trophy. If you mount it in the middle, there's only holes for 2 of the 4 bolts. This is just an angle adapter so you can mount 4 points. Hardware: - 4x…
I modeled this to angle my pedals on a wooden platform I made, the models listed are at 15° and 22° from the FLOOR, the pictures show the 22°, you need to lift the back 1.5in and 3in for the 15° and 22° respectively, that being said you…
Magnetic Shifter Mod This model is a magnetic shifter mod for the MOZA Racing ESX Steering Wheel. The mod will improve your shifting feel. It will feel shorter, more direct, and more aggressive. You can print it without any special…
Uses basic imperial screws, if I get enough downloads, I'll make a metric version. When slicing, be aware that there are nuts that should be paused and placed in the model. Expect different style of nobs in the future. This is also tested…
I applied the Formula mod (not Moza) to the original Moza ES steering wheel that I use with various simulators. Since the steering wheel buttons cannot all be set the same for different simulators, I created this mask for the bindings for…
This design was made to give leverage to remove the extension for the quick release. When wheelbase is equipped with the Moza multi function stalk it becomes really hard to remove the extension. I made different sizes for different Quick…
Trápil mě stále vyskakující samozavírací pant. Jedná se u můj první pokus o vlastní model. Zdá se, že funguje dobře a proto sdílím dál. Doporučuji tisk z PETG
I made this mount to hold a tablet to use as gauges on my sin rig. This fits Moza R5, but I believe it will fit other Moza wheel bases as well. There is a relief built in to use Velcro.
You need one insert, 6 wide switch brackets (black and purple in the photo), and 2 narrow switch brackets (yellow in the photo). Parts: (8) Omron SS-5GL2 snap switches Arduino Nano ESP32 (18) M3x8 socket cap screws (18) M3 heat set…
Full length replacement plate for MOZA SR-P Lite pedals.
EDIT added V2 components, now the magnets are force mounted but can get away easily thanks to a cut on both sides, does not need magnet cover anymore, and only one magnet per hole is enough. Mount for 3.5"dashboard for moza R9 Needed…
Mount for 5" Vocore dashboard for moza R9 Needed material: 2 to 7 M2 4mm screws, back plate needs at least 2 screws, 3rd optional, front plate is held by 4 screws but is not necessary 12mm diameter magnets Vocore 5" screen…
This model was inspired by the design of DonKeulito . I needed to re-design the model as my angle of the tube it attaches to did have a different angle and I needed it for a different handbrake and shifter. The chair can still be folded…
Update to the latest version of this model. Someone asked if there was a way to make this without having to take the tubular frame apart. I've made a new version with a hook instead of a full circle. Material: PLA works Resolution:…
Sim Rig - MOZA Racing Wheel Mount - 8040 Profile Ever felt like your additional racing wheel was just lying around and always rolling away? Well, with this holder, your extra MOZA Racing Wheel gets its own VIP spot on any 8040 profile!…
Adapter to mount Moza R9 wheel base to GT Omega ART Simulator.
Moza / Simagic / D1 spec quick release mount. Mount to your structure of choice with an M8 socket head bolt and slide on your Moza, Simagic, or otherwise D1 spec compatible quick release wheel for storage. Note that plastic is plastic,…
I purchased a truck spin wheel but the support although large didn't fit my moza tsw so i made one. The two holes to connect parts together are for m3 nut and bolt while the hole for the spin wheel bolt is m8.
This 3D scan captures a life-size model of the iconic Mozart bust found in the Graz City Park. I was particularly drawn to this piece because of its striking resemblance to Mozart’s death mask, showcasing the composer’s delicate features…
Inspiration came from https://www.printables.com/model/525141-moza-srp-to-playseat-challenge-adapter. But its a fundametally more comprehensive build and mine is for the Challenge X where as the linked project is not. Some notes: I have…
A friend bought @Sam3DBox's 3-Spoke Steering Wheel and needed to connect it to the Moza Racing Quick Release, so I made this adapter for it. Added a tiny detent bump to make a bit more friction, so the steering wheel has a good hold but…
Pretty straight forward, this is a set of basic covers for the Moza bases and wheels to protect against the contacts getting dusty or damaged when not in use. Technically anything that is using D1 QR's, so Simagic stuff, should be…
After upgrading my SR-P Lite pedals with a load cell I wasn't happy with how they felt with their smooth plates and shallow angle. I found some decent looking and priced pedals on Amazon and created adapters for mounting them in a more…
Diseñe esta tapa protector para la base con la M en relieve y un poco hoguero para no rozar la pintura, ya que los que hay van muy justos. impresión La M tocando la placa, 4 capas inferiores y cambio de color en la 5 capa para que cubra…
I’ve designed a custom steering wheel stand to keep my collection organized and beautifully displayed. This stand allows me to neatly place my favorite steering wheels on the shelf while keeping them safe and accessible. I’ve made three…
Los modelos que vi me parecían muy grandes y diseñe este mas minimalista y con tornillos directo a la base . Hay tres modelos, sin letras , con letras y con letras en relieve. Para el modelo con letras , primero hay que imprimir las…
Just attach this handle and use 4mm plastic straps to tighten it up
If you have both the MH16 and the MA3X joysticks from MOZA and don't want to leave them on all the time, I've designed a little stand to display them on. Print flat side down. The MA3X will be a little loose, but doesn't really worry me…
The pedal faces don't require the spacers and the spacers don't require the pedal faces. You can use either independently. Pedal Faces: * Less slippy than original pedals when playing in socks * Can be used with the original m4x8mm…
When installed on this adapter, the base will be angled at 7 degrees from the cockpit mounting plate. To lock the base in front, you will need M6x18 screws (I had them with washers), and M6x10 screws for the back (included with the base).…
Hi, I encountered a problem where my foot would occasionally slip off the brake pedal while braking, which posed a safety concern. To address this issue, the surface of the pedal has been enhanced with a specially designed pattern that…
If you want to convert your Moza HGP shifter from H-pattern to sequential this is an easy way. Also easy to remove when you want to cruise around with normal H-shifter, just lift off. Requires my mounting bracket , to get the bracket…
Mounts Moza R5 to a 40x120 T-Slot plane Bolts used to mount the 3D printed part to the T-Slot plane are M8x25mm Bolts used to mount the R5 to the printed part are M6x16mm (should come with the R5) I can make the exact same thing for a R9,…
A simple solution to the left to right wobble when using a FSProjects Airbus Flight Stick on a Moza AB9 Base making it more secure and flush Print two and place as shown in the pictures Printed in PLA layer height 0.20
50mm clearance for joysticks that would normally hit the mount (tested with FSProjects A320 Side Stick) plus the ability to adjust it lower or just use it as a spacer If you need more clearance drop a comment and I will happily upload…
Required: M8 x 20mm Bolt Zip Ties, less than 8mm width, and less than 3mm in height as always .step and .fd3 files are supplied so you can make modifications
A relatively simple mount for attaching the power supply for a Moza R9 to the rig directly. I have a RigMetal chassis, but it should work with any standard 40 series rails. It has 4 mounting bolts to secure it on the rig, but with how it…
Moza SRP / SRP Lite Pedal I made (Tested Works Perfectly) First model was 10mm off on the mounting screws which has been fixed. Will make a model with 3 mounting holes and longer if I feel like it. Used 70% infill gyroid could get away…
I DID THIS JUST FOR MYSELF AND FOR A FRIEND, ACTUALLY I DIDN'T REALLY WANT TO SHARE IT, SO I APOLOGIZE FOR ANY FLAWS. In order for the face to be transparent, but at the same time darkened, it must be printed from transparent plastic with…
Po zakoupení záhonu jsem se rozhodl , že záhon bude fungovat tak trochu jako samozavlažovací truhlík. Z tohoto důvodu bylo nutné udělat pár úprav a dokoupit věci, které jsou nutné. Pro tuto úpravu bude potřeba dokoupit krom záhonu i…
Thought it would be fun to try to design wheels to print for my Moza QR. I don't have any NRG systems. I might have to tweak some dimensions to make ones that aren't the 2.0 fit. All of these are printable without supports. You do need…
Two models. One uses M5 hardware to mount to the playseat challenge, other uses M6. Both use M6 countersunk screws to attach the Moza R9 to the adapter. The M5 Model requires: * 4x M6x14mm countersunk screws. * 6x M5 standard screws (14mm…
What you gonna need: DIN 912 M6x14 - 4 pcs. DIN 7991 M6x14 - 4 pcs. M6 washer - 2-4 pcs. M6 nylon lock nut - 4 pcs. Material: PETG or PLA Perimeters: 5+ Layer height: 0.20 mm Infill: 40%
1: Mount plate to moza base. 2: Mount base with plate to wheelstand.
Your MOZA Racing HGP Shifter might get loose and wobbly. That is because MOZA have put bad plungers in there, the springs brake! But there is an easy fix for that. Either replace plunger (or the springs in there), or print new plungers…
A removable dash or DDU for the Moza R3 wheel base. It may fit other Moza bases , if there are M3 threads in the base top, at a 90mm spacing. The mount is dovetailed, with a low stop surface, so that the dash can easily be mounted and…
I designed this Cover for the shaft of my R5 base for storage. Simple design that prints easily, Recommend orienting with the text on the buildplate, designed to print without support.
You could use an M6x16 screw to mount it on your Aluprofile, or any M6 countersunk for any other place. So I made two version. Print with 5 Walls / around 20% infill. Version M6x16 Version Countersunk:
Designed to mount this type of bass shakers to your moza crp2 pedals. Comes in 2 parts so it can be printed with no supports. Assembly instructions: Unscrew the aluminum plate from the bass shaker. Glue the plate in the middle of the…
For use with Moza wheel bases. I think they have the same shaft size at least. Wheel bolt pattern is only for 70mm, because that is the only wheel bolt pattern I have. This is a continuation of my non quick release Moza Adapter for 3rd…
After rescrewing the rod on the SRP brake for the thousandth time, I finally stripped the thread with some excessive force. Here's a replacement I quickly modelled up. Before you're worried, all the braking force will be handled by the…
Added holes in back DDU so screen can fit on the front of Moza R9/R12 base. Utilized 2x M6x20 Hex screws.
I have a Moza R9 mounted a Next Level Racing Wheel Stand 2.0. For my use, I end up unplugging and moving it around a lot. I have been getting more and more concerned with the power connector at the base. My solution? Design a mount for…
With this wallmount you can hang your steering wheels on wall. Steering wheel locks in place with Moza Quick release mechanism. PLA works fine for me, 15% gyroid infill.
This model allows you to use the Moza Stalks with any of the Simagic Alpha line of wheelbases. The adapter allows the Stalks to sit as close as possible to the wheelbase, maximizing room for your wheels and fingers. The adapter is a tight…
Simple moza es wheel designed after the 12 inch rim mod, meant to be used as a basis for other custom wheel rims.
These simple TPU pads for the Moza R5 desk mount/clamp were created to protect the desk better then the preinstalled foam pad. 95A TPU seems tough enough to hold it's shape under clamping force and soft enough to provide cushioning and…
Spacers to adjust the take-up and feel of the brake, 3 interchangeable spacers 2, 4 & 8 mm, adjustment from 0 to 14mm. Printed in PLA with 3 walls and 20% infill. Might actually be overkill seems to be surviving pretty well. Little…
Hello everyone, I am glad to present a random test model, which is also a tip for a bolt/stud M8. With this model I check the acceleration and speed of my printing, as well as the fracture strength by inserting a stud into the hole. Good…
Quick and easy print to turn your AB9 into a shifter - uses an M8 countersunk screw (length depending on knob but generally at least 40mm as the height till the thread is exposed is 25mm). If buy a knob, ensure it has a thread adaptor…
A Moza powersupply holder for the HSW system. You will need 6 “insert-empty.stl” to attach the holder to the HSW: https://www.printables.com/model/152592-honeycomb-storage-wall/files
Mounting hardware: 8x M4x30mm Bolts with round head. 8x M4 washers (Optional) 1x M6x30mm Bolt With round head. 1x M6 Nut Printed with PETG 15% Cubic infill. PLA might also work. Needs Support.
Moza SRP Pedals to match Cayman Pedals and improve Heel Toe. 5deg and 10deg version. Think the 5 deg works best with existing throttle plate. Replace throttle plate as well. I've been getting the SRP pedals a lot closer to Caymans clutch…
Modelled entirely myself, but mostly a direct copy in terms of dimensions. Throttle fills the entire pedal face now. I'm surprised how much grip the pattern gives. Made with a maximum of 30deg overhangs for better print quality. No extra…
Basic mount for the 14mm fan to cool down a little the Moza R12 base. I printed it with PETG as it needs to bend a little. Connect the fan and the bottom part with screws. Put on the cover. Then just connect it wit a base using screw…
![[Remix] Moza SRP Pedal Faces](https://media.printables.com/media/prints/92352616-5f25-4128-8e0f-dedfb2d90535/images/9523628_1a83e115-11e8-4606-8d85-5759bb99e173_7bdb50b2-2bdb-4b06-bc61-a92ebaa29ace/20250417_181116.jpg)
![[Finished] MOZA SRP Pedals to Playseat Challenge Adapters](https://media.printables.com/media/prints/9cb366b1-a5cf-4e2b-976a-76f1529d70c1/images/10560577_f6aef318-29c6-4df2-97c9-ed8996be6cf9_bfb0dcb9-3225-44dc-af0b-2df382649461/2025-08-29-17_41_21-playseat-challenge-clamps-_-assem.jpg)
![[WIP] Printable Steering Wheels for NRG 2.0/Moza Quick Release](https://media.printables.com/media/prints/1141728/images/8612991_cb4f4524-0367-4923-8c19-0597c50f8998_a45d800e-9d6a-4ca5-a900-1cf6b2d481a5/2025-01-09-22_19_05-steering-wheels-_-assembly-1.jpg)
