[Finished] MOZA SRP Pedals to Playseat Challenge Adapters
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapters to fix the MOZA SRP pedals to the Playseat Challenge frame. Intended to be used with the included screws.
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 224
- Makes
- 1
- Views
- 2,231
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution
Update to the latest version of this model. Someone asked if there was a way to make this without having to take the tubular frame apart. I've made a new version with a hook instead of a full circle.
Material: PLA works
Resolution: 0.6mm*0.15mm (0.4mm nozzle)
Walls: 2 (alternate extra)
Infill: Cubic 18%?
Supports: No
Brim: Maybe
High temp with minimal cooling for strength
MOUNTING THE BLOCKS
Take the stubby M8 screws. Screw them a little into the hexagons.
Once the screws have purchase in the plastic, wiggle the hex key or rub the screwdriver like starting a fire. This will heat the screw and help form the thread in instead of cutting it.
Screw the blocks in lightly to not strip the threads. Check after the first couple sessions to re-tighten.
UPDATES:
Worked on ways to support the rear. I added something that I think works well enough.
Distance between threaded standoffs was wrong. Hope that's fixed now
High tolerance on the front makes you lose friction. Maybe test print to check the fit so it doesn't fall down when stored…