Counting matching models…
UPDATE 8/17/2023: Updated Build Guide from v0.1 to v0.2. This includes more information and links in the electronics and internals section of the Parts List, more specifically adding the specific battery needed to fit inside of this…
The pedal faces don't require the spacers and the spacers don't require the pedal faces. You can use either independently. Pedal Faces: * Less slippy than original pedals when playing in socks * Can be used with the original m4x8mm…
[NOTICE]: I just added a new version with wider hole spacing for someone's SRP Lite. For others with SRP Lite those holes don't seem to work. Measure your own pedals to see which ones you have. Modelled entirely myself, but mostly a…
Spacer to mount the Moza SRP Pedals onto an aluminum extrusion as the default mounting is for a 4080 profile. Mounted on a 4040 extrusion(using t-slot nuts) with the moza included m6 countersunk screw
Update to the latest version of this model. Someone asked if there was a way to make this without having to take the tubular frame apart. I've made a new version with a hook instead of a full circle. Material: PLA works Resolution:…
Inspiration came from https://www.printables.com/model/525141-moza-srp-to-playseat-challenge-adapter. But its a fundametally more comprehensive build and mine is for the Challenge X where as the linked project is not. Some notes: I have…
Hexagon pedal plate for Moza SR-P and SRP-Lite pedals. Adds more grip for slipping feet. The files include a plain flat replacement, a plain hexagon pedal and a hexagon pedal with ‘neowww’. The print attaches with the screws from the…
Design Concept This 3D model represents Ember, a commanding officer character from a strategy role-playing game (SRPG). The design captures the dynamic and authoritative presence of a central game character with intricate detailing to…
Spacers to adjust the take-up and feel of the brake, 3 interchangeable spacers 2, 4 & 8 mm, adjustment from 0 to 14mm. Printed in PLA with 3 walls and 20% infill. Might actually be overkill seems to be surviving pretty well. Little…
After rescrewing the rod on the SRP brake for the thousandth time, I finally stripped the thread with some excessive force. Here's a replacement I quickly modelled up. Before you're worried, all the braking force will be handled by the…
Moza SRP Pedals to match Cayman Pedals and improve Heel Toe. 5deg and 10deg version. Think the 5 deg works best with existing throttle plate. Replace throttle plate as well. I've been getting the SRP pedals a lot closer to Caymans clutch…
Performance Kit for SR-P Lite but 3d printable. Comes with a manual
Moza SRP / SRP Lite Pedal I made (Tested Works Perfectly) First model was 10mm off on the mounting screws which has been fixed. Will make a model with 3 mounting holes and longer if I feel like it. Used 70% infill gyroid could get away…
If you are a machine knitter then you know what a pain it is to have your work snag on the ribber gate pegs when it's not in use. This cover was created to alleviate that problem with the added benefit of keeping the ribber bed clean. 4…
Replacement pedal faces for the second-generation Moza SRP pedal set
IMPORTANT: If you use the upper part of the pedal with large force, it lift up the front part of the pedal. This is solved with a screw and a nut. If you use the middle part of the pedal this doesn't happen. Closed size is: 21.5 cm Open…
Moza SRP/SRP-lite Inverted Pedal Mount
A TPU or TPE Spring for the Brake, inspired from a type for Thrustmaster, It's more progressive. The strong one work well with 95a TPU, super strong with 83a TPE, TPE is more flexible but TPU works good so far. 3D printing settings 100%…
Coin holder RSD za Srpski dinar
This is a custom-designed 3D-printable enclosure for USRP B210, consisting of two interlocking parts: top and bottom. The case is optimized for Bambu Lab A1 Mini, ensuring reliable printing with supports. Parts A and B slide into each…
I modeled this to angle my pedals on a wooden platform I made, the models listed are at 15° and 22° from the FLOOR, the pictures show the 22°, you need to lift the back 1.5in and 3in for the 15° and 22° respectively, that being said you…
This started as a one off meant for my use case only, but after getting some attention in some forums, I've been asked if I could post STEP files, so here they are. First off, this is meant to be an upgrade for someone who doesn't…
If you want to get the focal plane of the telescope as close as possible to the secondary mirror, you can use this modified printed front piece together with the following extra short focuser:…
I added some feedback to my Moza SRP-Lite Pedals, using an Arduino and L298N motor driver board all controlled by Simhub Wiring of thee Arduino and L298N for this purpose can be found with a quick google search. I've attached a wiring…
Dual and single vibration motor mount for the Moza SRP and SRP-Lite pedals. Designed for 24 mm vibration motors (pictured with 24 mm × 30 mm motors). Original design holds two motors, allowing you to run one for high-frequency vibrations…
MOZA SRP Pedals Load Cell Sensor Cable Strain Relief. You need to mount it on top of the sensor casing using the four original screws, then use a zip tie to secure the sensor cable. This cable can be easily torn off the sensor plate. You…
Print with low infill (I used 5% grid) for saving filament and time. Regular version fits 12x3mm magnets (or use 12x2 but don't push them in all the way). Two work just fine. Use four if you want max grip.
Replacement for the clip that holds the lid shut on the Bixolon printer. Left side only, but the STEP file is provided if you need to mirror it and create the right side.
Phillips Universal Remote, model SRP2013 CL5 universal mount. Using the airmax controller file with the rounded geometry that matches my remote, I scaled the original to fit my Phillips remote control snugly. Original interior dims were…
Put your own number plate on your keys! These mini number plate keychains are in the style of Indian HSRP plates (car and two-line bike plates, with the raised blue wheel and IND mark) and European plates (blue band with a country code).…
The B200mini is prone to suffer from USB port failure due to insufficient stress relief. The Cable will eventually rip the port traces from the PCB and finally off the USB chips. This manifests first as sporadic connectivity, dependent on…
If you're experiencing unstable pedal feel and poor braking response due to the springs, you can try this solution. NOTE: I used 80A polyurethane springs; using spacers would have given the same result. *If you want more flex, use 70A or…
Designed to replace existing pedals on a Moza SRP or SRP pedal set. Material used was PETG. PLA should work in the standard pedal orientation. Photo shows my current pedal set. Including my prototype pedal bracket and some other pedals I…
After rescrewing the rod on the SRP brake for the thousandth time, I finally stripped the thread with some excessive force. Here's a replacement I quickly modelled up. Before you're worried, all the braking force will be handled by the…
Modelled entirely myself, but mostly a direct copy in terms of dimensions. Throttle fills the entire pedal face now. I'm surprised how much grip the pattern gives. Made with a maximum of 30deg overhangs for better print quality. No extra…
I modeled this to angle my pedals on a wooden platform I made, the models listed are at 15° and 22° from the FLOOR, the pictures show the 22°, you need to lift the back 1.5in and 3in for the 15° and 22° respectively, that being said you…
Update to the latest version of this model. Someone asked if there was a way to make this without having to take the tubular frame apart. I've made a new version with a hook instead of a full circle. Material: PLA works Resolution:…
Some of these mods don't need to be downloaded with the details in description. Its a collection of what I've got to work and found beneficial. A collection of various mods and updates to a MOZA R9 Simrig with EX Wheel, SRP Pedals and…
This is an adapter to mount the following OMP pedal plates: https://www.ompracing.com/p/set-3-racing-pedals/ to the Moza SR-P (Lite) pedals. The original screws from Moza + the screws and nuts delivered with the OMP pedal plates are used…
Clip-on Cable Winder for USRP Power Adapter For a long time, I found these power adapters inconvenient to store and use. They were often lying around on the desk or in a drawer, and due to the shape of the adapter itself, winding the…
A simple adapter for holding a Seiko SRPK watch in a standard vice. Inspired by https://www.printables.com/de/model/582000-watch-vise-adapter and used in https://www.printables.com/de/model/51074-fast-operation-vise .
This is a remake of the original mounting plate for a SRPT-02 repeater to use with HF Apache 550 case.
![[Remix] Moza SRP Pedal Faces](https://media.printables.com/media/prints/92352616-5f25-4128-8e0f-dedfb2d90535/images/9523628_1a83e115-11e8-4606-8d85-5759bb99e173_7bdb50b2-2bdb-4b06-bc61-a92ebaa29ace/20250417_181116.jpg)
![[Finished] MOZA SRP Pedals to Playseat Challenge Adapters](https://media.printables.com/media/prints/9cb366b1-a5cf-4e2b-976a-76f1529d70c1/images/10560577_f6aef318-29c6-4df2-97c9-ed8996be6cf9_bfb0dcb9-3225-44dc-af0b-2df382649461/2025-08-29-17_41_21-playseat-challenge-clamps-_-assem.jpg)
