1 / 10
[Finished] MOZA SRP Pedals to Playseat Challenge Adapters — zdjęcie 1
1 / 10

[Finished] MOZA SRP Pedals to Playseat Challenge Adapters

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapters to fix the MOZA SRP pedals to the Playseat Challenge frame. Intended to be used with the included screws.

Ocena
5 / 5
Polubienia
22
Pobrania
224
Wydruki
1
Wyświetlenia
2225
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution

Update to the latest version of this model. Someone asked if there was a way to make this without having to take the tubular frame apart. I've made a new version with a hook instead of a full circle.

Material: PLA works

Resolution: 0.6mm*0.15mm (0.4mm nozzle)

Walls: 2 (alternate extra)

Infill: Cubic 18%?

Supports: No

Brim: Maybe

High temp with minimal cooling for strength

 MOUNTING THE BLOCKS

  • Take the stubby M8 screws. Screw them a little into the hexagons.

  • Once the screws have purchase in the plastic, wiggle the hex key or rub the screwdriver like starting a fire. This will heat the screw and help form the thread in instead of cutting it.

  • Screw the blocks in lightly to not strip the threads. Check after the first couple sessions to re-tighten.

UPDATES:

  • Worked on ways to support the rear. I added something that I think works well enough.

  • Distance between threaded standoffs was wrong. Hope that's fixed now

  • High tolerance on the front makes you lose friction. Maybe test print to check the fit so it doesn't fall down when stored…

Tagi