Logitech G29/G920 Quick Release adaptor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Logitech G29/G920 Quick Release adaptor using 32mm bike seat clamp.
- Rating
- 5 / 5
- Likes
- 93
- Downloads
- 1,115
- Makes
- 5
- Views
- 6,498
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Share Alike
WIP! Let me know how well it works.
Logitech G29/G920 Quick Release adaptor using 32mm bike seat clamp, like this one.
Files
- Female adaptor for fitting to the Logitech base
- Male adaptor for refitting original Logitech wheel
- Male adaptors for fitting any wheel with 70 or 74mm 6-bolt pattern. This should work with major brands like MOMO and Nardi.
- FreeCAD files for all models
Printing
I would recommend printing in PETG or ABS, with at least 40% gyroid (or similar 3d pattern) infill. If your slicer supports it, I would adjust infill only where necessary, so it doesn't take three years to print.
Assembly
See the video below (not my own) on how to disassemble the G29. The G920 is almost identical, but missing a few buttons.
As for refitting the original wheel, the adaptor is designed to have cutouts for the LogitechG/PS cap to be attached. It should be rather self explanatory.