Search results: handbrake

Counting matching models…

Printables

BrakeLock V2 - Motorcycle handbrake

Use with caution! I do not guarantee this brake to work for every motorcycle, and it should not be regarded as an extra safety, just a fun model!

Order a print of this model

Printables

Sequential Shifter Handbrake buttonbox combo V2

Held on a playseat challenge thanks to this design: https://www.printables.com/model/302265-playseat-challenge-shifter-holder-shortened-attach The controller board and wires…

Order a print of this model

Printables

49E Hall Sensor mod for USB Handbrake

This mod is designed for the popular low-cost USB handbrakes sold on AliExpress. The stock PCB is removed and replaced with: Sensor mount for a 49E linear Hall-effect sensor (fixed with hot glue, check the images) Magnet holder for a 8×3…

Order a print of this model

Printables

Simagic Haptic Reactor Adapter for TB-RS Handbrake - HPR NEO P-HPR

Simple Adapter to mount any Simagic Haptic Reactor on an Simagic TB-RS Handbrake. Used Screws: - 2x M4x12 - 2x M4x18 - 2x M4 Nuts

Order a print of this model

Printables

Grip for cheap usb handbrake

I recently ordered usb handbrake (from aliexpress) and noticed that stock grip is just terrible. I decided to make proper grip for it. Hardware: 7x M3x12mm bolts 7x M3 nuts Grip consists of two parts, left and right side. Outer surfaces…

Order a print of this model

Printables

Sim Racing - Handbrake v2 / Solid & Easy to build / Arduino

If you are Canadian you might have an old hockey stick & a skateboard in your garage haha. The photo is actually my version 2 and it is what I'm using right now. I will print and upload V3 when time come. The print is solid and easy to…

Order a print of this model

Printables

Volvo P1 (S40, V50, C30, C70) Handbrake Rear Cap

I had to buy a replacement handbrake cover for my C30, so I thought I might as well model and print it as a challenge. Hopefully this saves someone from having to spend $18 on a tiny piece of plastic! Obviously the toughest plastic you…

Order a print of this model

Printables

Logitech Shifter and Sim Handbrake Mounting Plate for GT Lite Seat

This is a moutning plate for the Logitech shifter and a generic sim handbrake on a GT Lite foldable seat. Here are the print specs I used: PLA+ 200C 40% infill All walls 2.5mm (VERY IMPORTANT) I use UltiMaker for the modelling and print…

Order a print of this model

Printables

Hydro Handbrake Top Part MIKU (M8 Nut Design)

This is a custom top handle for a hydraulic handbrake witch MIKU and 01 Text, specifically designed to house an M8 nut. The model features a multi-part design, allowing for clean multi-color printing without the need for manual painting…

Order a print of this model

Printables

Sequential Shifter Handbrake buttonbox combo

2025-05-10 entirely new design https://www.printables.com/model/1292138-sequential-shifter-handbrake-buttonbox-combo-v2 2022-11-10 Added smaller ball versions for shifter to reduce weight as well as smaller screw, ball diameter choice is…

Order a print of this model

Printables

Load Cell Sim Racing Handbrake (Updated 2024.08)

2026.03.26 I've reworked this a bit. The straight dovetail mount loosened over time due to PLA creep (aka plastic deformation), so the latest version uses tapered dovetails. As it loosens it just sits a tiny bit lower in the mount. Also…

Order a print of this model

Printables

Playseat Challenge Shifter (TH8A) and Handbrake (Moza HBP) mount

This model was inspired by the design of DonKeulito . I needed to re-design the model as my angle of the tube it attaches to did have a different angle and I needed it for a different handbrake and shifter. The chair can still be folded…

Order a print of this model

Printables

Dowels for 0$ Handbrake

Instead of finding a metal rod or dowel and cutting to size just print these. 30mm and 40mm in length for the bottom of the handbrake handle.

Order a print of this model

Printables

Fanatic Handbrake side mount

Fanatec Handbrake side mount for 80 series profile. I made this mount for my Simlab GT1EVO cockpit Mount is for right handed, you can mirror in the slicer if you wanted for left handed Print in the flat position Theres a option for tilted…

Order a print of this model

Printables

Keyboard Sim Racing Handbrake

I wasn't able to find any free models for a fully 3d printed handbrake that worked without any extra components so I decided to make my own. The design is made to function with the key cap under the hand brake removed and to be held down…

Order a print of this model

Printables

Sim Racing Handbrake

I designed a simple handbrake, which use basic mouse board. I think everyone has partially defective mouse (optical sensor or left/right switch defect), so you can reuse it if one switch working properly. To configure mouse button you…

Order a print of this model

Printables

Hoonigan Handbrake Keychain

Not sure what car this is out of. If you know leave in comments. -RIP-

Order a print of this model

Printables

Sim racing handbrake for Logitech G920

This is a fully working handbrake. It's the dev version, so i will be updating it! Before you do anything, just read those two .txt files in .zip!

Order a print of this model

Printables

BrakeLock V2 - Motorcycle handbrake

Use with caution! I do not guarantee this brake to work for every motorcycle, and it should not be regarded as an extra safety, just a fun model!

Order a print of this model

Printables

Bicycle handbrake/Hamulec ręczny na rower

English:The diameter of the circle attached to the grip is 3 cm. (A larger one is also available, see my profile). Polski: Średnica kółka zakładanego na drip wynosi 3cm. (Jest dostępny też większy, zobacz na mój profil).…

Order a print of this model

Printables

HAMULEC RĘCZNY DO ROWERU / HANDBRAKE FOR A BIKE

Second model with a larger wheel diameter (3.5mm) Drugi model z większą średnicą koła (3,5mm) Parametry Drukowania: Wypełnienie/Fulfillment: 10% Wysokość warstwy/Layer height: 0,2mm JEŚLI NIE BĘDZIE PASOWAĆ DO TWOJEGO GRIPA LUB NIE BĘDZIE…

Order a print of this model

Printables

Handbrake cable holder for FORD FOCUS II

It is preferable to print ABS or PET. The settings are normal. Support is not required. I did not take a photo of the finished model, as I immediately installed it on the car. Glory to Ukraine!!!

Order a print of this model

Printables

Fanatec Shifter and China Handbrake Mount for 8020

To mount the Fanatec 1.5 Shifter and one cheap Handbrake from Aliexpress to a Simrig based on alu profiles.

Order a print of this model

Printables

Handbrake MINI MLOK Handstop Kung Fu stipple

For best results, print in a temp resistant material. Print at 100% infill for max strength. Supply your own MLOK nuts/bolts. I used these: https://www.amazon.com/gp/product/B0CXJDDKR3

Order a print of this model

Printables

Fanatec Clubstport Handbrake Handle

Replacement Handle / Grip for Fanatec Clubsport Handbrake V1.5

Order a print of this model

Printables

Logitec RS Shifter and USB handbrake holder for Playseat Challenge

Holder for the shifter and handbrake that should be used with the Playseat Challenge Universal Mount .

Order a print of this model

Printables

Handbrake Pedal pad for Nissan

Info: The pedal pad has been enlarged to increase the strench of the structure. The model is no larger than a regular clutch pedal, which in turn does not interfere with operation. I printed the model and tested it on the car. When…

Order a print of this model

Printables

Logitech LPH (Logitech Pedal Handbrake)

Convert the remaining Logitech pedal to the handbrake It's much quieter, faster and better than AliExpress's cheap handbrake For the axis, we use a PVC pipe with OD22 ID16. It's lightweight and very strong It's my first time making an…

Order a print of this model

Printables

X56 HOTAS Handbrake Modification

To use this in a game, simply go into the in game settings and set the handbrake to when you pull the stick back on the x56. I am not sure if this attachment works on other sticks as I only have the X56. My print time was about 3-4 hours…

Order a print of this model

Printables

Hall Sensor Handbrake MOD for sim drift rally

Using the back plate from LeecarL's design I've made another version. Here you only mount the Sensor and magnet in the handbrake and I would advice using a coil cable to connect to the Arduino 1 KY-003 - 49E (make sure you have a analog…

Order a print of this model

Printables

Xbox 360 controller analog Sim handbrake leaver

Order a print of this model

Printables

Playseat Evolution Handbrake Mount

The model is based of this product on amazon, and since they don't ship to my location i decided to make my own, I've mounted it using 7 M6x20 Hex screws and 7 M6 Locknuts. Its printed in PLA

Order a print of this model

Printables

Vertical Mount for generic TruckSim Handbrake

Just a simple mount to convert generic USB truck handbrakes from Amazon/aliexpress into the vertical position, using the original desk clamp.

Order a print of this model

Printables

Simagic TB-1 Handbrake Bracket for Fanatec Shifter

Recommended to print on its side for maximum strength and ridgidity, will need supports for the angled support if printed this way. Could most likely be used to mount the handbrake to other extrusion. Used 4 ¼ 20 bolts, washers, and nuts…

Order a print of this model

Printables

SIM handbrake adapter

Layers: 5 Fill: 30% mesh Cut M8 thread For table max 25mm

Order a print of this model

Printables

Next Level Racing Wheel Stand Lite 2.0 Handbrake Holder

This is a handbrake holder for Next Level Racing Wheel Stand Lite 2.0. I'm using chepies handbrake from Aliexpress.

Order a print of this model

Printables

Simsonn Handbrake Cable Extension Box

I use a Simruito type handbrake with Simsonn Controller . The Simruito factory controller was faulty, the connection pins are the same as the Simsonn pedals. I made an extension box with a 3D printer, because the Simsonn control box is…

Order a print of this model

Printables

Handbrake and Shifter Combo for Sim Racing (Updated)

Initial design and test for a combo handbrake and shifters using 90mm RC shocks for parts. Handbrake is On/Off version at this point due as its easier to wire with the board selected. V2 design uses a bearing and standoff to compress a…

Order a print of this model

Printables

Brace for Trak Racer Handbrake Mount

Stiffens the floppy handbrake mount available for Trak Racer sim chassis. Category: Video Games

Order a print of this model

Printables

VNM Handbrake V1.5 Armrest/Pad

Padding for the top of the VNM v1.5 handbrake, in case it lives someplace where your arm might hit or rest upon it. Soft TPU at low-medium infill recommended for comfort. Category: Video Games

Order a print of this model

Printables

Sim Racing Handbrake Extension + Frame Mount

Simple mounts and lever extensions for mounting a "universal" Chinese sim handbrake with a 34x86mm bolt pattern to a sim rig and better positioning the lever. Rig mount hole spacing originally designed for Obutto chassis, also works on…

Order a print of this model

Printables

Moza handbrake vertical adapter

The adapter to mount handbrake vertically. I mount the handbreake to a table and it was the only option to have it closer and more comfortable to use. You can use two original screws to connect adapter to the clamp and you need two…

Order a print of this model

Printables

Drifting handbrake

a detailed model of a handbrake for a drift car. (NOT FUNCTIONAL)

Order a print of this model

Printables

Simjack HE003 handbrake extension

After getting a sequential shifter, it felt like the base handbrake handle wasn't long enough even after moving it up far as possible with the wood sections it came with. You only need two holes with screws in it to lock it down, so as…

Order a print of this model

Printables

TSS Handbrake Mount for Playseat Challenge

Couldn't find any mounts for TSS Handbrake and Playseat Challenge combination so here's one. I remixed original shifter mount by adding length to the mount seat. Since handbrake is really sturdy I recommend using durable materials and…

Order a print of this model

Printables

Sequential Shifter Handbrake buttonbox combo V2

Held on a playseat challenge thanks to this design: https://www.printables.com/model/302265-playseat-challenge-shifter-holder-shortened-attach The controller board and wires…

Order a print of this model

Printables

Volvo S40 Handbrake Mechanism Replacement | partnumber 205032

This model is a replacement mechanism for the handbrake of a 2008 Volvo S40. It replaces the original part number 205032 , which had broken in my car, leaving the handbrake non-functional. After designing and printing this part, I was…

Order a print of this model

Printables

T6.1 Lowered Handbrake Cover

Handbrake cover for Transporter T6.1 with lowered handbrake (THQ bracket) https://www.ebay.co.uk/itm/374553790202

Order a print of this model

Printables

Regular Handbrake for Sim Racing

I always wanted a regular handbrake for my sim racing experience - it's what I am used to, and it's what feels satisfying! And most of all, I like the feeling of racing in a street legal car. I never could find a handbrake like this - so…

Order a print of this model

Printables

Handbrake lever locking tool for all vehicles with brake lever on the handlebar

Handbrake lever locking tool for all vehicles with brake lever on the handlebar Locks the handbrake and thus reliably prevents the vehicle from rolling away Examples of use: on steep terrain parking, during transport of vehicles by train,…

Order a print of this model

Printables

Load cell simracing handbrake from 2020 profiles

Hello everyone. I designed a sim racing handbrake for your rigs that uses alumium extrusions as a base and handle. The rest of the parts are printed in PLA or any other material with more strength (I tried with PLA and it performs well).…

Order a print of this model

Printables

Handbrake mount for 4080 aluminium sim rig

Suits the china USB handbrake and mounts on the side of an aluminium profile of 4080. Perfect for your sim rig. Just print in PLA with 25% infill laying on the side for best strength for those moments when ju have to save that drift. Have…

Order a print of this model

Printables

M-LOK Rail Covers and Handbrakes

rail scales are expensive so adding these on here. i will revise at some point to make new ones for myself. please give me a like if you download any, thanks!

Order a print of this model

Printables

handbrake (freio de mão)

more efficient quick coupling on the front brake

Order a print of this model

Printables

Heusinkveld Handbrake v2 Accessory/Tool Holder

A remix of the Heusinkveld Sprint Accessory/Tool Holder. I really liked the design so I remixed it to work for the handbrake. Category: Tool Holders & Boxes

Order a print of this model

Printables

Diy Load Cell Handbrake

Load Cell Handbrake A load cell based handbrake design that's compatible with all of my other DIY Sim Racing projects. Project Video Link There are two different versions of the handbrake design, "Printed" and "Laser cut". The laser cut…

Order a print of this model

Printables

Handle pipe for Logitech LPH (Logitech Pedal Handbrake)

Handle for replace PVC pipe with OD22 ID16

Order a print of this model

Printables

Grip for Fanatec ClubSport Handbrake V2

0,2mm layer 15% infill no supports Print with TPU

Order a print of this model

Printables

49E Hall Sensor mod for USB Handbrake

Order a print of this model

Printables

Fanatec Handbrake Spacer

The Fanatec Handbrake Spacer provides extra clearance between your Fanatec handbrake and shifter. When mounted directly together, the close positioning can cause issues in higher gears (5th–7th) or while braking. This adapter adds just…

Order a print of this model

Printables

Cheap sim handbrake spacer

Spacers to remove the sideways wobble from cheap sim handbrake. Recommended to drill & tap (or just drill if you have long 4mm screws) holes to mount these. Most likely wont bring the needed rigidness otherwise. I used 12x4mm screws that…

Order a print of this model

Printables

NLR Victory Handbrake mount for Moza Handbrake

Hand brake mount for the Next Level Racing Victory, to work with the Moza Handbrake.

Order a print of this model

Printables

Fanatec Clubsport Shifter SQ & Handbrake Spacer

I customised a washer to make a spacer when attaching the Fanatec Handbrake to the Fanatec Shifter. When the shifter is set up on your right, I found the handbrake to be very close to gear shift when shifting into 5th and 7th (Not I have…

Order a print of this model

Printables

Mousepad for Playseat Trophy Gearshift and Handbrake Holder

Habe das Mauspad gebaut das ich gerade keine Hangschaltung auf dem Halter habe und so kann man es gut dafür benutzen. Es hält direkt, muss nicht geklebt werden. Drucken geht easy natürlich ohne Supports.

Order a print of this model

Printables

Handbrake for Racingseat

Order a print of this model

Printables

Playseat Challenge Handbrake Mount, M6 Hardware

Handbrake mount for those cheap Chinese handbrakes.

Order a print of this model

Printables

Compact DIY Handbrake Lever (Sim Racing)

This is a simple 3D-printable handbrake lever for a PC/sim racing setup. The mechanism uses a small limit micro switch as the input sensor and rotates on a single bearing for smooth, stable movement. For extra feel, you can optionally add…

Order a print of this model

Printables

Sim Racing Handbrake – Load Cell

This project is a remix of the mentioned potentiometer-based sim racing handbrake, upgraded to use a load cell for force-based measurement instead of position-based input. The result is a much more realistic handbrake feel, similar to…

Order a print of this model

Printables

Logitech G923/29 pedal handbrake handle.

I used one of the pedals (Brake) and the cable from an old G923 pedal set. Took it apart, hook the brake pedal up normally, ground the signal wire on the other two connections, take the pedal face off and use the screws to bolt the handle…

Order a print of this model

Printables

Thrustmaster TSS Handbrake Shifter - 160mm Aluminium Profile Mount -V3

After exhaustive testing, a very solid mount for the Thrustmaster Sparco TSS Handbrake to suit 160mm Aluminium Profile Rig. I wanted something that could stand up to the abuse of hard shifting, and think I've now settled on a solution.…

Order a print of this model

Printables

E36 Handbrake Handle

Handbrake handle, part number 34411116435. Has a recess for a zip tie when reinstalling the boot.

Order a print of this model

Printables

BMC Handbrake pivot axle bush

I printed it with Filaflex 60A TPU Filament, 100% infill. You might want to try a bit harder compound also. Lubricate well before installation with brake rubber grease or PTFE-lube. Remember, you need two of these. Have fun and gimme all…

Order a print of this model

Printables

Simagic Haptic Reactor Adapter for TB-RS Handbrake - HPR NEO P-HPR

Simple Adapter to mount any Simagic Haptic Reactor on an Simagic TB-RS Handbrake. Used Screws: - 2x M4x12 - 2x M4x18 - 2x M4 Nuts

Order a print of this model

Printables

Grip for cheap usb handbrake

Order a print of this model

Printables

Playseat Challenge Handbrake PXN HBS

Remixed to fit the PXN HBS, Print with pauses and drop in the nuts as you go.

Order a print of this model

Printables

Sim Racing - Handbrake v2 / Solid & Easy to build / Arduino

Order a print of this model

Printables

Volvo P1 (S40, V50, C30, C70) Handbrake Rear Cap

Order a print of this model

Printables

Logitech Shifter and Sim Handbrake Mounting Plate for GT Lite Seat

Order a print of this model

Printables

Miata Mx5 nc handbrake gaiter lock bushing

If you, like me, changed the handbrake handle and kept the original gaiter, you'll have an annoying space between the gaiter leather and the lever beneath. I designed this bushing that fits the gap, adapting between the lever and the…

Order a print of this model

Printables

Hydro Handbrake Top Part MIKU (M8 Nut Design)

Order a print of this model

Printables

Handbrake Add-on for Logitech G29/G920 Shifter

A handbrake add on for a Logitech G29/G920 "Driving Force Shifter" that mounts underneath the shifter. I made this because the cheap metal frame I had for my steering wheel / pedal / shifter set up did not have any additional space to add…

Order a print of this model

Printables

M8 Sim Handbrake Grip

Hey there, thanks for checking out my model. I'm still trying to get better at CAD, but recently I needed a grip for a hand brake, and I thought I would make one instead of just downloading one, so I made this guy a hexgrip handle for…

Order a print of this model

Printables

Sim Racing Handbrake

Never been printed. Please give me feedback. for installation referr to the amstudio build guide: https://www.youtube.com/watch?v=kv0FTpRLFMY Converted and edited for smaller printers. Original Files:…

Order a print of this model

Printables

Classic Mini Handbrake and Spot Warning Light in Dashboard mod

With this mod, i added something a classic Mini never had: a warning light for the handbrake. This can be useful, as, i have to admit, one can forget the handbrake if you are in a hurry. Also i added a light that show that the spotlights…

Order a print of this model

Printables

Plastic Handbrake Cover for a Fiat Bravo 198 II (2007-2014)

The size can be reduced on one side depending on the condition of your parking brake cables.

Order a print of this model

Printables

Next Level Racing GT Lite Logitech shifter mount (Compatible with CNRAQR handbrake)

Based on the original model from chyrio (thingyverse) I 3d modeled from scratch in Plasticity. Designed to bring handbrake and shifter closer for easy reach. Made some design tweaks to help with a handbrake plate attached Works with GT…

Order a print of this model

Printables

Peugeot 208 Handbrake Button

Produced using Fusion360 using part pictures found online for inspiration (original part reference "98062963ZD"). Printed using white eSUN PLA+, 0.2mm layer height, 0.4mm nozzle, 3 perimeters, 15% infill, no supports, ~4g of filament. The…

Order a print of this model

Printables

Open SimRacing Handbrake, CAD files. Cheap construction. AS5600

Welcome! This project is opensource and I upload all cad files. You can upgrade code or print files to make it fit your parts. You can make CUSTOM HANDBRAKE LEVER. I made it with a 14x3 trapezoidal thread, so you can make it longer or…

Order a print of this model

Printables

Handbrake sim racing for fanatec base (diy fanatec clubsport handbrake v2)

Français Frein à main pour sim racing sur base fanatec Pour pouvoir l'utiliser comme un fanatec clubsport handbrake v2, il vous faudra une prise rj12 et un potentiomètre 10kΩ que vous devrez raccorder comme cela: +5v : rj12 pin 1 ->…

Order a print of this model

Printables

Moza HBP Handbrake Spacer

This is a spacer to shorten the pull of the moza handbrake. Quick and dirty design it's not perfect fit but it works for what it was intended for Will need 2 M3x10 Screws to attach it

Order a print of this model

Printables

Electronic remake for USB handbrake

Electronic remake for USB handbrake Why This handbrake is sold with electronic components that are not always well calibrated or simply doesn't works (on Linux for example). This modification is a remake of the electronic that allows you…

Order a print of this model

Printables

Logitech G27 / G29 hidden sequential and/or handbrake mod

I drew some inspiration from some other designs on here to make a completely hidden sequential mod for the Logitech G27 shifter. The bracket goes underneath the shifter boot and you use an elastic band (or multiple) to make the shifter…

Order a print of this model

Printables

Kettcar Handbrake

Simple handbrake for Kettcar (8 mm hole). Knurled grip. Printed in PETG with 0.6 mm nozzle.

Order a print of this model

Printables

G27 Pedal Handbrake

I converted the brake pedal from my G27 pedal set to a handbrake. Print this to have a handle to use with the pedal mounted horizontally. Two models are provided, 150mm and 250mm. I used motorcycle grip over the handle, but you could also…

Order a print of this model

Printables

Handbrake for Sim Racing

Handbrake A handbrake to use in driving games. The picture of the assembled design (or the FreeCAD files) should given an idea how everything fits together. Putting it all together inside the small enclosure wasn't that easy. All parts…

Order a print of this model

Printables

Morris Minor handbrake button

The other handbrake button broke so I recreated it and added the Morris Minor logo to it. Printed at 100% infill

Order a print of this model

Printables

Sim Racing Handbrake

This is a handbrake design that I made for sim racing. This is a simple on/off device, it is not analog! I printed everything at 50% infill and 4 walls. You'll probably want to use tree supports touching the build plate also. I printed…

Order a print of this model

Printables

Muldenkipper / Field railway wagon - DIN5963 - WITH HANDBRAKE for 45 mm track - 1:16

This is a 1:16 model for 45 mm track of a standard German 600 mm, 1 cbm Muldenkipper with handbrake according to DIN5963 Axles: standard LGB axles running in MR63ZZ bearings (3.0x6.5x2.5 mm) The bearing holders are fixed to the frame with…

Order a print of this model

Printables

Handbrake button Peugeot 307sw

Replacement button for the handbrake of a peugeot 307 sw If your old button went flying due to the spring preassure… now you got a cheap replacement for it. Fits perfect and stays inside with a drop of hot glue on the tip. its a 30 minute…

Order a print of this model

Printables

Sequential Shifter Handbrake buttonbox combo

Order a print of this model