1 / 3
Heusinkveld Handbrake Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for the heusinkveld handbrake on 40mm aluminium profile using M8 screws.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 80
- Makes
- 0
- Views
- 1,209
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
Mount for the heusinkveld handbrake on 40mm aluminium profile using M8 screws.
Hardware
- 2xM8 screws for profile
- 2xM8 T-nuts for profile
- 4x M6x20 screws
- 4x M6 nuts
- (4/8x 6mm washers)
*Sorry for image orientation, I don't know what my phone is doing...
Print instructions
Printed in 0.2mm PLA with 100% infill. Lower infill may also work, but the difference in print-time was not that big so I went with 100 for max strength.