Logitech Shifter and Sim Handbrake Mounting Plate for GT Lite Seat
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting plate for Logitech shifter and sim handbrake on GT Lite racing seat
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 49
- Makes
- 0
- Views
- 416
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Share Alike
This is a moutning plate for the Logitech shifter and a generic sim handbrake on a GT Lite foldable seat.
Here are the print specs I used:
PLA+ 200C
40% infill
All walls 2.5mm (VERY IMPORTANT)
I use UltiMaker for the modelling and print with a Ender 3 Pro. Print time was 1 day and 7 hours. It's okay for it to take time
I used two countersunk M6x1.0 bolts for the Logitech shifter and M6x1.0 hex bolts with nuts to mount the handbrake to the plate. I included a hole for the mounting hole screw but in my experience using the plate you don't need it because it already sits very tight in there.