Sequential USB shifter / Handbrake
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dual use USB shifter or handbrake
- Rating
- 0 / 5
- Likes
- 51
- Downloads
- 231
- Makes
- 0
- Views
- 3,414
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution
!Check out Carlos' remix, it's an improved version you probably should download instead!
Summary
A shifter with a switch on the side so you can use it as a handbrake. The shaft mounts to a potentiometer on one side so you get accurate values. Keep in mind the travel can be a bit short for the handbrake, but I am using this mainly for the seq shifter and I figured it's better than using a plain old button. Keep that in mind if you're using this for a handbrake. But you can remix it and just remove the mounts for the switches to give it a lot more travel space.
If you need some changes and don't know how, just ask in the comments. I'll gladly help :)
I made space for an arduino in the base, but I ended up hot gluing it to the bottom of the shaft so it follows the movement. It seemed to work better.
Components needed:
2x - Micro switch
1x - Potentiometer
1x - Arduino pro micro
1x - USB cable
2x - Pull springs (5x25.5mm)
4x - M4x25 mounting screws for the sides
4x - M4x6 mounting screws for the base
4x - M4x6 for the springs
4x - M2x10-15 for the switches
4x - M4 for mounting the base to whatever surface you want
Wiring
--
Code is in files, see Shifter_HB.ino