Sim Racing Handbrake V1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's an 3d Printable alternative for the E bay-Sim-Handbrake. Using an potentiometer and an Arduino.
- Rating
- 5 / 5
- Likes
- 154
- Downloads
- 962
- Makes
- 2
- Views
- 12,989
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
All the files that are required are downloadable and ready to print I made adjustments how the parts are printed and don't need to be changed but you can still change them if you want to use less filament.
Also when assembling use superglue on some bolts so that they don't come off. I am working on a design with nuts to prevent using gluing parts together. Also the grips must be glued on the upper handle part. Also the Table mount is designed to fit a 20mm table plate so you may need to adjust it.
The Parts are Printed in Black PETG and the layer height is already set.
The required hardware is listed here:
Electrical Things:
-Arduino Pro Micro
-Slidable-potentiometer (L x B x H) 35 x 9.5 x 6.5 mm F2031N 20mm travel
-Some cables
-An USB Micro cable
Mechanical Hardware:
-M5x10mm x 10
-M5x30mm x3
-M8x20mm x 4
-M8x25mm x 6
-M8x65mm x 3
-M8x60mm x 1
-1.2x9x45mm Spring x1 You can choose what spring you want to use
-M8 lock nut x6
-M8 Nut x4
Little hint when assembled use some electric tape on the Grips for a better feel.
I used this YouTube video as a guide how to wire it and how to set up the code:
https://amstudioprojects.com/handbrakes/