1 / 2
Wisblock & Radar Sensor Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Just a very simple basic case for the RAK Wisblock and the RAK Radar Sensor. I used it with the following components, using Meshtastic:
Core: RAK4631
Base Board: RAK19007
Radar Sensor: RAK12013
- To mount the board you can use the bigger screw which come with the RAK19007 base board.
- There is a hole to access the reset button with a pin.
- The USB-C connector is accessible externally.
- No room for a battery, I use this permanently plugged in.
- No holes for the LEDs, use a bright material and they will be visible through the case.
- The port of the case can be glued on.