Case for ESP8266 ESP-01 DHT11 module
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a case for the ESP8266 ESP-01-based DHT11 module available via various sellers. For example, here is one that…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 24
- Makes
- 0
- Views
- 245
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a case for the ESP8266 ESP-01-based DHT11 module available via various sellers. For example, here is one that has the module and the ESP-01 as a combo.
I have noticed that the temperature readings of these devices tend skew high due to the heat from the ESP8266. To counteract, I recommend bending the sensor out so that it's no longer affected.
Power is provided by a micro-USB breakout found in the same places as the module. Here is a link to one from the same seller as above.
For software, I am using esphomeyaml on the device to log values to Home Assistant.
Update 2019-03-23: Adjusted the design to be a little larger to allow bending the sensor out to avoid skewed readings from the heat of the ESP8266.
Post-Printing
- Use an M3 tap for the lid holes and the mounting holes for the USB breakout.
- Solder wires to connect the VBUS on the breakout to the Vcc on the module, and the GND on the breakout to the GND on the module
- Use M3x6 screws to attach the breakout to the base
- Use hot glue to keep the module in place
- Use 4 M3 screws to attach the lid to the base