adxl345 and ESP8266 / LoLin g-force sensor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This print takes a LoLin ESP8288 module along with an adxl345 g- force / acceleration sensor. The sensor is tilted by…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 337
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This print takes a LoLin ESP8288 module along with an adxl345 g- force / acceleration sensor.
The sensor is tilted by 45° in all three axis. Like this, the accelerations measured in all axis can be combined to get a better resolution in z direction.
Goes together with a couple of M3 nuts and bolts.
ESP8266 and sensor Modul are "upside down" to directly use jumper wires.
Designed in Onshape;
public link to CAD - source files attached:
https://cad.onshape.com/document-redirect.html?d=/documents/758ecacadb659540c7dc48a9/w/1be7207027d9de08f9a02bff
Print Settings
Printer:
Anet A8
Rafts:
No
No
Resolution:
0.2
15
Category: DIY