20 models
This is a 3D printing speed test. It consists of two 3D models, optimized for testing speed and acceleration of the perimeters and the infill respectively. You can use these to tweak your speed and acceleration settings and look for…
A simple test tower for tuning acceleration and jerk/junction deviation. Fully customisable with the source file: https://cad.onshape.com/documents/1afa1c55109b3ef715f6a6c1/w/23d23b4f073e5e6749fc66f2/e/18cceba522813632f4ef37ec Companion…
As a follow-up on my temperature-tower for Bambu Studio, I created this Acceleration-tower . (and also a speed-tower ). Its width is designed to fit in a 1x2 gridfinity basket. The general presets work, but I want to explore the effects…
Print the mesh flat and then use heat (heatgun/hairdryer) to carefully wrap it around your wrist. I have posted 2 sizes of mesh depending on how big your wrists are. The rune stone fits into both. I painted mine with acrylic paint AFTER…
Acceleration speed of 6 stages are configurable in slicer. Default configured values, update it as you wish: Perimeters Extermal perimeters 30 19 35 21 40 23 45 25 50 27 55 29 Use any filament, i personally use Prusament PETG glossy black…
This project uses IR sensors to detect when a ball is near then triggers a relay switch to the external power source letting current through the wire which pulls the ball away from the sensor and to the next magnet. No programming at all.
Model Yazıcının X ve Y eksenlerinin acceleration testinin yapılmasını hedefler. 400mm/sn² ivme ile başlar 1400mm/sn² ivmeye kadar çıkar. Vazo modunda ve 0.2 katman yüksekliğinde basılır. NOT: Test esnasında makinenizin başından…
I got fed up with existing tensioners for my printer and made these ones from scratch. You're gonna need four M5 bolts, two for the tensioners and two for mounting the Y tensioner. The required length is anywhere from 1 to 2cm, depending…
Optimized design of Teaching Tech acceleration test print, for 0.4mm nozzle with minimal line width setting of 0.2mm.
Purpose Test your printer's maximum acceleration and tune other settings like input shaping and belt tension How to do it Print and gradually increase speed and acceleration as you print, examine for artifacts like ghosting, rounded…
Liked the model of MisterT, but I wanted to be able to scale it so I can test a large range of values. therefore I removed the changes in shape over the Z axis. X is 1 stripe, Y is 2 stripes
BLV - Remix to minimize the Weight: Carbon Tube (Aluminium 190g -> Carbon 60g) Serpa Mini lightweight extruder (Bondtech BMG Full size Stepper 390g -> Sherpa Mini 120g) Additional Features: Volcano Hotend ADXL345 accelerometer for Klipper…
Tactile image of two cartesian graphics showing arcs of accelerated movement. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited to…
Tactile image of graphs showing constant speed and acceleration curves plotted. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited to…
The ADXL345 is commonly used to measure resonances for input shaper tuning. This part fits the Adafruit version of the breakout board for the ADXL345 and allows easy mount of sensor to bed. Attach it to the piece with M2.5 screws.
This model was created because, in my experience, standard square acceleration tests produce false results. Printing at right angles is the "easiest" test, many printers that print without echo at up to 25k acceleration at right angles…
Couldn't find anything so I made this model for testing speed-acceleration-jerk combo and seam settings on a model closer to real models instead of a 1-walled lying lab tower... Designed for three 0.42 walls. Use seam painter to set seams…
I used an MPU-6050 sensor, but others may work if the meet hole spacing described below. Only tested on Neptune 3 Pro, but it could work on other printers with the same tool head. Additional parts required: Acceleration sensor with…
Print the mesh flat and then use heat (heatgun/hairdryer) to carefully wrap it around your wrist. I have posted 2 sizes of mesh depending on how big your wrists are. The rune stone fits into both. I painted mine with acrylic paint AFTER…
Couldn't find anything so I made this model for testing speed-acceleration-jerk combo and seam settings on a model closer to real models instead of a 1-walled lying lab tower... Designed for three 0.42 walls. Use seam painter to set seams…
