Alexa-Ready Smart 120 mm Desk Fan – 3D-Printable Stand & ESP8266 Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Smart 120 mm desk fan with Alexa voice control; USB-C powered stand & Arduino/ESP8266 enclosure.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 28
- Makes
- 0
- Views
- 563
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Transform any 120 mm PC fan into a compact, voice-controlled desktop cooler.
This download contains three printable parts:
Low-profile stand – slips under most monitors and accepts the NV-AA1-12 Airflow Amplifier for boosted flow.
ESP8266/Arduino housing – keeps the microcontroller tidy and ventilated.
Step-up converter case – lets a single USB-C cable feed 5 V in and deliver 12 V to the fan.
Smart-fan features
Wi-Fi + native Alexa control via the fauxmoESP library—no extra cloud setup needed. Arduino Forum
PWM speed range 0–100 % with RPM feedback. Arduino Forum
Offline button control and AP/captive-portal setup if Wi-Fi is unavailable. Arduino Forum
Saves on/off state and speed in EEPROM so settings survive power cycles. Arduino Forum
Hardware you’ll need
| Qty | Part | Notes |
|---|---|---|
| 1 | 120 mm PWM fan | 105 mm mounting pattern |
| 1 | ESP8266 board | e.g. NodeMCU |
| 1 | Step-up converter | 5 V → 12 V |
| 1 | USB-C cable & 5 V supply | 2 A recommended |
| 2 | Tactile buttons | Manual control |
| Several | screws/nuts | Assemble stand & cases |
| – | NV-AA1-12 amplifier (print youself) | Optional airflow booster |
Print settings
Material: PETG or PLA
Layer height: 0.2 mm
Perimeters: 2–3 for strength
Infill: 20 % gyroid
Supports: none needed
Nozzle: 0.4 mm (0.6 mm ok)
Assembly & setup
Print parts, insert the step-up board and ESP8266 into their cases.
Wire fan → step-up → ESP8266, sharing ground.
Bolt the fan to the stand; clip on the Airflow Amplifier if desired.
Flash the code from the linked Arduino Forum thread and enter Wi-Fi. Arduino Forum
Add the new device in Alexa and enjoy hands-free cooling—or use the onboard buttons when offline.
Feel free to ask questions.