Alexa-Ready Smart 120 mm Desk Fan – 3D-Printable Stand & ESP8266 Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Smart 120 mm desk fan with Alexa voice control; USB-C powered stand & Arduino/ESP8266 enclosure.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 563
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Transform any 120 mm PC fan into a compact, voice-controlled desktop cooler.
This download contains three printable parts:
Low-profile stand – slips under most monitors and accepts the NV-AA1-12 Airflow Amplifier for boosted flow.
ESP8266/Arduino housing – keeps the microcontroller tidy and ventilated.
Step-up converter case – lets a single USB-C cable feed 5 V in and deliver 12 V to the fan.
Smart-fan features
Wi-Fi + native Alexa control via the fauxmoESP library—no extra cloud setup needed. Arduino Forum
PWM speed range 0–100 % with RPM feedback. Arduino Forum
Offline button control and AP/captive-portal setup if Wi-Fi is unavailable. Arduino Forum
Saves on/off state and speed in EEPROM so settings survive power cycles. Arduino Forum
Hardware you’ll need
| Qty | Part | Notes |
|---|---|---|
| 1 | 120 mm PWM fan | 105 mm mounting pattern |
| 1 | ESP8266 board | e.g. NodeMCU |
| 1 | Step-up converter | 5 V → 12 V |
| 1 | USB-C cable & 5 V supply | 2 A recommended |
| 2 | Tactile buttons | Manual control |
| Several | screws/nuts | Assemble stand & cases |
| – | NV-AA1-12 amplifier (print youself) | Optional airflow booster |
Print settings
Material: PETG or PLA
Layer height: 0.2 mm
Perimeters: 2–3 for strength
Infill: 20 % gyroid
Supports: none needed
Nozzle: 0.4 mm (0.6 mm ok)
Assembly & setup
Print parts, insert the step-up board and ESP8266 into their cases.
Wire fan → step-up → ESP8266, sharing ground.
Bolt the fan to the stand; clip on the Airflow Amplifier if desired.
Flash the code from the linked Arduino Forum thread and enter Wi-Fi. Arduino Forum
Add the new device in Alexa and enjoy hands-free cooling—or use the onboard buttons when offline.
Feel free to ask questions.