Intel Compute Stick Mounting Bracket for OctoPrint Server
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I was using a Windows laptop for running OctoPrint but it was taking up so much space that I decided to install…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 432
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I was using a Windows laptop for running OctoPrint but it was taking up so much space that I decided to install OctoPrint on an Intel Compute Stick. All the benefits of my Windows 10 laptop in a very tiny package.
I wanted to mount it out of the way so I created this bracket / mount. This is designed to fit on the 4020 extrusion of my Sovol SV01.
If you like this, or would like it for a different printer, let me know.
v6: Open clamp for the Intel Compute Stick
v7: Closed clamp for the Intel Compute Stick
v8: Closed clamp / 20mm wide for the Intel Compute Stick
Print Settings
Printer:
Sovol SV01
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.20mm
Infill:
100%
Filament:
Canada3D PLA
Blue
Notes:
I printed this at 120 mm/s after the initial layer. I set the walls to 4 to give it some additional strength.
It's flexible enough to spread the part that slips over the 4020 extruded base and holds it snuggle. There is a little bit of 'wiggle' in the piece for the Intel Compute Stick - so that you can slide it if you need to.Category: 3D Printer Accessories