Intel Compute Stick Mounting Bracket for OctoPrint Server
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I was using a Windows laptop for running OctoPrint but it was taking up so much space that I decided to install OctoPrint on an Intel Compute Stick. All the benefits of my Windows 10 laptop in a very tiny package.
I wanted to mount it out of the way so I created this bracket / mount. This is designed to fit on the 4020 extrusion of my Sovol SV01.
If you like this, or would like it for a different printer, let me know.
v6: Open clamp for the Intel Compute Stick
v7: Closed clamp for the Intel Compute Stick
v8: Closed clamp / 20mm wide for the Intel Compute Stick
Print Settings
Printer:
Sovol SV01
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.20mm
Infill:
100%
Filament:
Canada3D PLA
Blue
Notes:
I printed this at 120 mm/s after the initial layer. I set the walls to 4 to give it some additional strength.
It's flexible enough to spread the part that slips over the 4020 extruded base and holds it snuggle. There is a little bit of 'wiggle' in the piece for the Intel Compute Stick - so that you can slide it if you need to.Category: 3D Printer Accessories