OpenBench Desktop Case / Test Bench ATX/mATX/ITX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
There are almost no atx bench top designs currently on thingiverse since most 3D printers are dimensionally too small…
- Ocena
- 4 / 5
- Polubienia
- 154
- Pobrania
- 1001
- Wydruki
- 5
- Wyświetlenia
- 6941
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
There are almost no atx bench top designs currently on thingiverse since most 3D printers are dimensionally too small to print parts for the ATX standard. This bench top design is capable of being printed on most smaller printers like the ender 3 or (probably) prusa mini. All longer pieces can be printed at a 45 degrees if needed
This design allows for 4 support brackets, 2 on each side. I've created 3 that work for my use case and a blank one but you could make custom ones to suit nearly any purpose. Ive included a picture with the measurements I used for the custom supports with the imprtant ones being the crossbeam cutout dimensions and the height dimensions.
I am in the process of printing my design right now, so if you find this before I upload pictures, just know that it is untested.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
10%
Filament: Any Any Black
Notes:
No supports are needed. The parts will slide along the crossbeams but can be super glued if desired.
Category: Computer