Liczymy pasujące modele…
This is a compact (150x200x28mm) jig for using PCB stencils to apply solder paste, or transparency sheets for applying a soldermask. It is not a full 4-axis machine created for high-volume production, but will handle skew, twist, and…
Hold a 6-pin needle connector with this model. The dimensions are for one of our PCBs, but the OnShape model here is parametric so it is can be changed for other PCBs.
Works with 70x100 or 100x100 FR4 boards. For 100x100 boards only base and 4 clips are used. For 70x100 boards only base and holder are used. PLA+ 100% infill for extra rigidity. Original screws could be used to mount the base to the CNC…
For the complete box you need my PCBite SQx probe inserts . This is a ready-made configured box with all the parameters set appropriately to fit those inserts, just slice and print it in your desired colors! Looking to store PCBite's…
Remix of the DB cowl with the klicky pcb at the front. I use it in my Trident which has space at the front for the dock.
content 3 pieces 2 washer 1 adapter. U need to cut out a bit from the cw2 enclosure so Ucan plug the connector of the toolhead. No support needed. nozzle 0.4 layer height 0.2
This was designed for a cubby which is 20" wide and 15" deep. The LED's stick to the “channels” (pointing down at a 45 deg angle) and the channels stick to the intersection of the cubby walls and ceiling. The diffusers slide into the…
Extended the mount by 5mm. This way, the fan is further away from the back panel, the flow is then less restricted.
This is just a simple coaster. There's a little bit of a rim around the edge, and across the middle there's a PCB-inspired design. It's wide enough to fit my water bottle, but feel free to scale it however you'd like in order to fit what…
Build a professional protective housing for your Raspberry Pi 5 with Waveshare Connector & USB 3.0 PCB Adapter. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the…
INFO The Afterburner motor plate with an added hole. This is designed to be used with the extruder body of the Afterburner (the version with the hole on the side) and one of my mounts for the Neptune 3 series toolhead PCB. REQUIRED…
So the original model has the support piece a bit higher, which can interfere with PCB Klicky. This fixes it. Move the metal support rod around 10mm down!
Mount for the E3D PZ Probe PCB for use with Stealthburner with a Cartographer3D CNC carriage. It can also be used with a printed carriage that you can get from Gusk's model . This model has a shallower angle for the PCB than the original…
This is a custom 3D-printed holder for standard high-power LEDs mounted on 16mm star PCBs. The mount is designed to securely hold the LED board and allows for easy attachment to various surfaces using m3 screws. No more hassle with gluing…
This is a case for the little test board. There are two versions of the top. I configured my board with the top left connector shorted, the top right connector has a 50 ohm resistor, and the bottom two connectors are bridged. I use these…
Simple changes to the standard case - Parts are for LH, please mirror in printing to make RH parts. Now compatible with AliExpress PCB's too! Heat press inserts are removed and replaced with holes for a countersunk Polyfix or self tapping…
This is the STL data of the shell created for the swancolorHD PCB. This variation has a hole on the right side for connecting expansion devices such as the WonderSwan's communication cable. In the image, it looks like there is a slit in…
I had a Planck keyboard where the USB-C port ripped off the PCB, making it impossible to reattach. I purchased a USB-C breakout board and wired the PCB to it to give new life to the keyboard, but the extra thickness of the breakout board…
notes: scroll wheel not 1:1 power switch not accurately modeled sensor lens is not the correct model (L0AE-LSI1 lens instead of the LM19-LSI used in the beastx 8k) stl is not updated but additional components are i cannot guarantee that…
You will need a ¼" - 20 Long screw/bolt, 2 or 3 nuts ¼-20 a #10 Bolt and nut ( I got mine from a harbor freight storehouse kit) a washer, wider is better, but the hole should still be small, maybe a fender washer? Concrete to weight it…
PCB holder for Dragon Burner with Sherpa Micro You need 6 M3x5x4 heatset inserts, longer bolts for extruder and 4 M3x8 for carrier itself.
Voron StealthBurner has no filament sensor, let's add one. In case you have a MK3S's filament sensor retired or spare, we can use it to make a filament sensor for stealthburner. Voron stealthburner…
use flat countersunk head M6*30mm x2 To attach the case to the pedal and hex socket head cap screw M5*30mm x2 To pcb
just a small holder for 50x70 mm prototyping PCB with 2 holes for connectors on the side
This repo is going to show the process of me designing, printing, working in KiCad, Fusion360, and overall building this split keyboard. I plan to explain the issues I didn’t know were issues until it was too late, and show how I managed…
Single PCBite insert designed to securely hold the PCBite cable within the Rugged Multipart case during storage and transport.
Dock to park the PCB Klicky probe on the Raise3D Pro 2. Can be used with the orbiter V3 mount:
This is a remix of the PCB_Mount component in @TheStockPot's Everything Presence One ceiling mount design. Assembly Instructions: Follow the assembly instructions on the original model page. The only difference is using this modified…
Decorative or prototyping piece that visually simulates the printed circuit board (PCB) of the AirGradient ONE air quality monitor. Designed for 3D printing, this replica reproduces the dimensions and component layout of the original PCB,…
M4 - 5mm screws needed for the extra 1mm thickness a 1mm spacer to add an antenna 'block' at the top, bringing the original antenna away from the metal body for better signal keeps the uConsole looking close to stock. the antenna 'block'…
3d printed Biqu B1 carriage that connects the pcb to the hot end assemble in 1 part.
What if there was an Arduino that could do everything?... This model is a case for the Arduino Bannou, both designed by me. Case Features - PCB can be inserted without damaging buttons on left and right side - Case designed to be…
I designed this soldering filter using filters and a fan that I could buy on Amazon. The fan is USB-powered and measures 120 x 120 mm with a thickness of 35 mm. The filters are made of activated carbon and measure 130 x 130 mm with a…
This adapter plate mounts an Adafruit INA238 current sensor PCB to a DIN rail clip (shown below) so that the PCB can be mounted on DIN rail.
Variation of "dock mount variable part 2". The part is 5.5mm shorter.
I couldn't wait for the PCB to arrive to build this, so created this 'dummy PCB' that takes up the same space as the PCB itself. This means BMO can at least look the part, even if their buttons are just for show right now ;) Hope it's…
I have older model A and B Floppy Emu that uses sockets for the LCD, making them taller than the later models. This uses 4, M3 x 12mm flat head screws threaded directly into the plastic to assemble the case. I printed my case in PETG, no…
Print using the recommended Voron settings: Sourcing Information | Print Settings. Find the bumper to be mounted on the X Axis here . Use M3×5×4 threaded inserts as provided with standard Voron 2 kits. Min. required: 2 for the PUG mount…
⚠ This print is for an application that involves mains voltage. Make sure there are no exposed wires and take the necessary precautions! Be aware that there is a risk of electrocution or fire. ⚠ This is an enclosure for mounting the…
This is the coaster holder which holds a set of 5 novelty coffee coasters made of PCB which includes coffee related puns OnShape Model…
You're going to need superglue and screws for assembly. May not be suitable for all SSD PCBs, look attentively.
Toolhead cover for the Creality K2, K2Pro & K2Plus. This is purely an aesthetic design and serves no additional purpose. Would advise to print with petg, abs, asa just to be safe. I printed it with Creality Hyper PLA Rainbow. Myself…
This is an enclosure for a cheap ultrasonic humidifier module to prevent contact with impurities and prevent damaging the PCB. Please note the model is not waterproof, and contact with water may damage the circuit board. It is designed…
I recently upgraded my ZD-915 de-soldering station. The little DC-DC converter PCB was left over. Instead of sending it to recycling, I soldered on 2 more resistors and modeled this little part so I can safely use it to drain capacitors…
What and Why? This is a remix of @JesseCrash's PCB mount, PCB cover and mount extension to fill out the bottom of the Pico MMU. I have my Pico MMU mounted at the top of my Ender 3 V3 SE, and ran into an issue with the PTFE tubes hitting…
This is a small stand for pcb's, protoboards, or other small rectangular objects. It was originally designed for small prototype PCB boards, but can fit a variety of different objects.
Alternative cover for the MMDVM Dual Hat for RPi2/3 case to accommodate the V1.0 MMDVM_HS_HAT_DUPLEX PCB with an alternative Antennas, screen and LED's placement
Heres another mosfet holder that I have designet for my 3D printer. You'll also need: 4* M3 x 10 mm screw 4* M3 nut (maybe securing nuts) 4* little coutersunk screws for wood Category: 3D Printer Parts
READ BEFORE DOING ANYTHING!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! DON'T TAKE ANYTHING OFF OF THE PRINTING PLATE, UNLESS EVERYTHING IS NOTED!!!!!!!!!!!! The total weight comes to around 320 g with supports. The project uses a ball joint, universal…
This is the bare PCB version of BIGTREETECH Eddy Duo, created from the original model that BTT is shareing on their GitHub page. BTT didn't specify a license in their GitHub page so I guess sharing under Creative Common - Attribution -…
These Gridfinity bins are designed specifically for storing very small components such as PCB rivets, SMD parts, tiny screws, inserts, and other micro‑hardware that tends to escape the moment you open a normal container. The magic is in…
Just a couple of improvements to make the original model a bit nicer to use, most importantly more clearance on the M3 bolt hole and using threaded heat-set inserts instead of an M3 nut, to prevent the upper clamp from ever being stuck to…
original PCB mounts have been added
Replacement jaws for an old PanaVise. Make sure your vise has 42.5mm screw spacing, otherwise it won't fit. I printed this with 4 perimeters for strength.
Vise Jaws that fit a very common found mini vise just like in the pictures. Optimized to hold PCBs while soldering. Has 2 places where a board can be clamped. Can hold PCBs up to 76mm wide.
I specifically designed this mount to be used along with LIBRA Extruder - Dragonburner Mount , other extruders may or may not work so you should for sure check if it fits in CAD tool. This model is part of 3 steps that you could follow…
I needed a housing for the Power Supply PCB everything is reachable from the outside. Threaded inserts ready
I've made a quick bracket for this USB Hub from aliexpress: https://www.aliexpress.com/item/1005007937606123.html I think you can get this from local hobby stores as well. Its model number probably is something like this:…
I noticed that non of the models out in the wild where accurate to the latest version I purchased on 2026-04-05, so I carefully measured and modeled the PCB I received and I am willing to attest it's accuracy to within 0.2mm of the real…
This badge was designed with a PCB-inspired aesthetic and optimized for FDM 3D printing. It was prototyped and tested using silk transparent PLA , which enhances the “circuit board” look by giving a subtle glossy and light-diffusing…
This is a pretty neat PCB you can get very cheaply off AliExpress. You can plug in a USB-C PD power supply and get 5/9/12/15/20V out. You can either switch the output using the button or (better) solder a wire link on the rear to fix the…
I didn't want to source the PCB and components when I had parts to build an RC setup, so made a mounting plate for a standard ESC with BEC and a power switch (I used a overkill 20amp ESC I had around but anything with >2amp and a BEC that…
This is a PCB Standoff for the display in an Aquarite salt system. The originals in my system had degraded and snapped. I whipped this up quickly so I could get the device up and running again, there could likely be tweaks to get them to…
Saw this post on reddit and thought it might be useful for some people, let me know if it can be improved somehow!
This is a little breakout board board for the XY stepper motors to help with the ease of maintenance. It is to prevent the rerouting of cables through the rear drag chain of your Voron 24 printer when your having to change the stepper…
This was my first project using TinkerCad to make a small cover for a PC board. The cover keeps drafts off PCB from generating noise and drift. You can change X, Y and Z dimensions with Cura to fit other boards. A small dab of glue at the…
Very handy and practical magnetic soldering light. I call it a PCB light pole. Works nice together with magnetic PCB holders. Especially soldering small surface mounted parts. Printed with standard settings. Arm is printed without…
Made for a YuMi Robot, plate is made to attach PCBs on top.
STEP file for the PCB of the Zaunkoenig M3K. This file is not intended to be printed out. It is intended to help you design a gaming mouse shell for the M3K PCB. A few notes about the screws used for the M3K PCB (identical to the M2K…
EDIT 7/19/2024: Some have commented about the difficulty disassembling the top from the bottom. A User suggested simply CUTTING OFF the nubs, which also seems to work well. This works really well! EDIT 7/17/2024: From AJAX: Made the…
I was missing a parametric model for a corner bracket to reduce the screw size. Most PCBs dont need a large screw to be mounted safe.
A contactless rotary magnetic encoder for fischertechnik with I2C 3,3V interface using the newer white square AS5600 modules. Comes in two versions, the 30x30mm version is more compact, but in many cases you'll want the 30x45mm version,…
https://github.com/ntchris/voron_mod_super_diy/tree/main/ercf_v2/filament_tension_sensor_hall Inspired by Annex-Engineering's Belay sensor module https://github.com/Annex-Engineering/Belay Inspired by jmillerfo 's Voron ERCF Filament…
this board has the correct board mount hole spacing of 55mm, the original will not work...this is for this build https://github.com/joeyoravec/stargate Category: Other
Motivation After printing the original ATX mounting bracket found the clip-on mounts a bit flimsy, so besides drilling them out decided to make a remix for future needs. Files Files with suffix _source are the ones used to render the STL…
This is an exact digital replica of a micro USB connector designed as an adapter for a scanner project. It can be used in custom electronic enclosures, prototyping, or as a replacement part. This model provides precise dimensions for…
We made this for the Plug and Make Kit, but you can use it to attatch any other PCB with a similar thickness. It prints fast and uses minimal amounts of filament. Printed with Prusa i3 MK4 with a 0.4 nozzle. We used a layerheight of…
Check your leds temp, if they get too warm another version will be available soonish
Gridfinity box for up to 11 PCBs with maximum dimensions of 21x1.8x∞. Suitable for: RPI Pico Step-up module MT3608 Li-ion charger TP4056 24bit AD Converter HX711 And many more… More information about gridfinity here:
Customizable standoff for mounting electronics boards to flat surfaces. I used this to mount a speaker crossover board to the inside of the speaker enclosure, but it would work well in many more applications. Parameters include: Base…
Hello, I made this little case to merge my bed fan Print in ABS, height 0.2 mm, no support You need to adjust the first layer well if you want to see the text on the cover. Orient the model as in this screenshot. For the PCB I use a 37 x…
Hello, Print in ABS, height 0.2 mm, no supports You need to adjust the first layer well if you want to see the text on the cover. For the PCB I use a 37 x 13.5mm prototyping board and JST F-XH254 male connectors soldered together. Use 4…
I made this angled mirror holder to allow easier viewing of LED indicator lights on the underside of a PCB. This is useful when I have the PCB fixtured upside down in order to access test points on the opposite side of the board. If the…
This is an adapter for a gimbal PCB board with 45mm hole spacing, tipically a 50x50mm pcb board. It's useful if you can't use, for any reason, the board screw holes. The PCB is secured between the two pieces of the adapter. Instructions…
This design is a frame to hold a PCB while you are assembling or testing it. It is not a clamp like a Panavise but just keeps the printed circuit board supported above the workbench surface so at sits flat while you work on the PCB. It's…
This design is a frame to hold a PCB while you are assembling or testing it. It is not a clamp like a Panavise but just keeps the printed circuit board supported above the workbench surface so at sits flat while you work on the PCB. It's…
Case for esp32-eth01 with custom pcb link for custum pcb for esp32-eth01 https://www.huizebruin.nl/product/esp32-eth01-ethernet-pcb-scr-con-01/
Enclosure designed in FreeCAD for my 12channel PWM WLED PCB designed in KiCAD. You can find the FreeCAD files for the model here Printing prints well, even with 0.6mm nozzle size and 0.20mm layer height. No supports needed. Assembly Print…
A simple, low material drying rack for PCBs fresh out of the ultrasonic bath.
This is my personal solution for the Zerosolar CB Rev. 5 with CMT2300a that I bought for my Hoymiles inverter . ✅ Compatibility Designed for SZ-OpenCB-V.5_0 by Nick Förster (2024) Compatible with ESP32 and CMT2300a radio module Intended…
