parametric PCB-Holder/mount for DIN-Rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PCB-mount for DIN-Rail, e.g. Relais as in my example
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 638
- Wydruki
- 1
- Wyświetlenia
- 3022
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a parametric (adjustable) PCB-Holder for DIN-Rails. I have attached the fusion360-file with full history in order to easily improve it. The design assembles without screws, you might need to compensate size of the connectors in your slicer or sand them a little.
I have printed successfully on Bambulabs X1C with ABS, PETG and PP with 0.4 nozzle and 0.12 layer height.
You can basically adjust to the size of your PCB within the slicer and without CAD.
I took the design from a broken DIN Rail adapter from a chinese company called SANWO. I have reconstructed it for use with different sized PCBs and adapted the design to be used in 3D printing.
if you are looking for DIN-Rail solutions, pls take a look at https://www.thingiverse.com/thing:3188822 (no my design, but really neat)