CHAOTICLAB Voron Tap V2 bracket for XY endstop PCB
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket for triggering X endstop with CNC Voron Tap V2
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 367
- Wydruki
- 6
- Wyświetlenia
- 1688
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
There was nothing included with Chaoticlab's CNC Voron Tap V2 to trigger the X-endstop PCB included with the LDO build, so i made one. It can be mounted with the same screws to mount a endstop switch on the included bracket.
I printed this in ASA to make it heat resistant and sturdy. It did take a couple of tries because the layers wouldn't cool enough on the smaller top part of the print. I didn't try to increase the fan speed because i was unsure if it would affect the layer adhesion, instead i copied the part and spaced it out over the table and this worked for me.