Liczymy pasujące modele…
Catapult Card A fully 3D printed catapult, prints flat within a card, so it fits in a C5 envelope, fairly powerful, lots of fun! Why Designed to be printed flat, including all the parts required for assembly. It’s a fun little toy, great…
Wydruk około 1,82 €–2,23 € nettoWstępna wycena jednego wariantu
Praktischer und einfach zu druckender Eierbecher im stapelbaren Design. Sollte mit einem recht Temperaturbeständigen Material gedrunkt werden. Ich empfehle PETG oder ABS. Ich empfehle ca. 20% Infill und eine 0.2 Schichthöhe. Supports sind…
Wydruk około 1,28 €–1,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Eine einfach zu druckende Box für Teebeutel (max. 65mmx73mm) Box ist stapelbar;) _________________________________________________________________________________ Easy to print tea bag box (max. 65mmx73mm) stackable ;)
Gridfinity holder for FastCap ProCarpenter True32 Metric Reverse Measuring Tape. I think this may fit other fastcap tape measures in the ProCarpenter series but I only have the metric one so I cannot confirm that. Full product description…
A simple splice block based off ¼" tape splicing blocks but for the width of cassette tape. I use it with a thin razor (it actually is the blade from a PTFE tube cutter) but I think an Xacto knife will work as well. Just like with a ¼"…
I broke off five pieces of the 9mm cutter knife blade and put the teeth in with a file Print in PLA oder PETG Layer height: 0,2 mm Infill: 15 % Supports: no Nozzle: 0,4mm Walls: 3
3x5x2 Gridfinity Bin for an assortment of taps and according drill bits. Customizable in Fusion 360 or by request.
Fixations de Tapis de Sol pour BMW (Vis à quart de tour) Remplacez facilement vos clips de tapis de sol cassés ou perdus. Ce modèle est une reproduction fidèle des vis de fixation BMW pour maintenir vos tapis de sol bien en place.…
WARNING: You are dealing with pressurized systems using stuff you 3d printed in your own house designed by some guy on the internet. Please pressure check your system before first use, and wear safety glasses. I am not liable for any…
This is my first design ever. It is ment to let the magnetic USB-C inside. A normal USB-C cable also fits the opening in the bottom I Also added a space for a M5 washer so you can attach it to the magnetic Phone holder in your car. Mein…
A two part case to keep your one up steerer tube threading tool kit organized.
Soporte porta rollo para la cinta de pintar, permite cortar pequeños trozos con una sola mano.
File names give information on the tape measure the mount is designed for.
Dodonga from the pataon series!
Uses the same offsets as Keenzkustoms
Minimalist tape dispenser: Two types of diameter for the tapes: Big – 76.5mm Small – 32.0 mm No Support needed Infill – 5% or 10% Nozzle - 0.4mm Happy print =) ** Please contact me if you need to change the size.
The original knob kept slipping off, due to an oddly chosen conical shape to fit on the straight edges on the tap. So i made a big ol' knob that screws on much tighter.
You need 4x2mm Round magnets
The key fits most standard tap nozzles.
These are holders for “ SteveJohnsen ”s custom projectiles. His projectiles are used for Adam-M 's "Catapult Card". There are 3 different sizes for my holders. 2x2, 2x4, and a 4x4. They all can hold SteveJohnsen's discuses. (I think, pls…
My family bathroom had a very long tap spout, which interfered with lower legs and knees of adults and heads of little playing people. Because this is an ‘external’ part of the tap, there was no chance of it adhering to any standard or…
These jigs help keep the extrusions aligned so you can cut up to 4 at once for very accurate lengths. The side plates are designed for M5 cap head screws. My extrusions have an M6 center hole but I've included M5 also. Also an alignment…
Tapester is a heavy-duty bench-mounted tape dispenser built for full size rolls of painters tape, packaging tape, duct tape, you name it. No more fiddling with the roll. Designed to mount directly to the top of your workbench using four…
Parametric Short Tap Follower. Required Parts: TapFollowerShort_point.stl (1x) or TapFollowerShort_hollowpoint.stl (1x) TapFollowerShort_tube_metal.stl (1x) Spring (1x) grub screw M3x6mm (1x) Category: Machine Tools
This is an archive of the various parts used for our cornerstone final project. We were tasked with creating a functional catapult prototype to deliver life-saving medical supplies (ping-pong balls). This catapult was meant to be capable…
Replacement handles for a staple puller / remover for when the originals break. A cadquery file is included so that any needed modifications can be made. The detailed design given here was for a staple remover I've had since probably the…
The arms need to be glued in. Can be printed laying flat.
A two part case to keep your one up steerer tube threading tool kit organized.
Gridfinity holder for FastCap ProCarpenter True32 Metric Reverse Measuring Tape. I think this may fit other fastcap tape measures in the ProCarpenter series but I only have the metric one so I cannot confirm that. Full product description…
LGX Lite extruder mount for Dragon Burner with TAP adapter.
This is my first design ever. It is ment to let the magnetic USB-C inside. A normal USB-C cable also fits the opening in the bottom I Also added a space for a M5 washer so you can attach it to the magnetic Phone holder in your car. Mein…
Remix of @wizzo TapTo case to fit the smaller module available on sites like AliExpress
Replacement caps for Cobra Aquila taps. These little badges are used to indicate hot or cold tap. I couldn't find anywhere I could only buy them, so I made some. They are blank on top, so you can add a H or C to it. I printed them in…
Avevo bisogno di un tappo per il mio attacco per il tubo da giardino del camper. Si avvita facilmente e funziona benissimo.
A replacement for the broken arms of a Gravitrax Catapult. Print Instructions: Simply import these two models to your slicer and cut the models in the centre. Thus, each model prints as 2 parts that can be glued together. It also works…
Sanding block for sanding tape 330x25 mm Customizable Sanding Stick parametric sanding block sandpaper holder Printed entirely on the side by default. Наждачный блок для наждачной ленты 330x25 mm Брусок для наждачной бумаги 330х25 мм…
These are holders for “ SteveJohnsen ”s custom projectiles. His projectiles are used for Adam-M 's "Catapult Card". There are 3 different sizes for my holders. 2x2, 2x4, and a 4x4. They all can hold SteveJohnsen's discuses. (I think, pls…
Holders were generated with conicity 0.05 from this SCAD: https://www.printables.com/model/1030467-parametric-holder-to-print-on-side
There is a small print in place catapult that can launch marble sized objects. The bigger catapult has the perfect size for ping pong balls. No supports required - best to print in petg 🔧 Key Features: Big Catapult: perfect for ping pong…
This is a “wall wart” style mount for a Tapo C120 camera . These cameras offer a good bang for the buck, but the stock magnetic mount seems a bit lightweight. I needed to mount several of them outside, and felt the need for a more robust…
Attachment mounts for lightweight cameras with standard tripod screw (1/4-20) Usable for baby cameras, web, streaming cameras or any other lightweight cameras. Shelf side mounts are designed for Ikea Kallax shelf top section and baby…
So I have a really nice embossing label maker, the Duramatic G-5. It was made by Dashew Business Machines, and from the original packaging and paperwork that I received with the label maker, I am guessing it was manufactured and sold in…
[Edit] Don't do what I did. Install the sensors the other way around. My silly way makes it very challenging to get them out. [Edit] Updated two files to fix slicing issues. Easy print, no supports. Secure to door/window using VHB or…
Railing support 25 mm top adapter. Print in ASA for UV resistance. Sand and smoothen the top with acetone, if needed. Use 5+ walls for strength. For a clean top, print as is, with supports. Print outer walls first (or vv) to reduce outer…
АЭРАТОР ДЛЯ ЛЕНТЫ ДИСПЕНСЕР ДЛЯ ВОДЫ ДИСПЕНСЕР ДЛЯ СТРУИ ВОДЫ ДЕЛАЕТ СТРУЮ ВОДЫ ПЛАВНОЙ. ПРЕДОТВРАЩАЕТ РАЗБРЫЗГИВАНИЕ ОТ
Simple model to hold your tape, for 1 inch thick tapes or similar sized things I used a brim to avoid the print lifting off the bed sheet. This is the double stick tape I constantly use for mounting (affiliate link): https://amzn.to/4fvJIJT
File names give information on the tape measure the mount is designed for.
Electrical Tape Holder Keep your electrical tape organized and easily accessible with this practical tape holder. Designed for standard-sized electrical tape rolls, the holder includes two arms (25 mm and 32 mm spacing) to securely hold…
A mount for the Tapo C120 camera that can use command strips to mount just about anywhere. The fit is tight, so the magnets may not be necessary in most mounting positions. Magnets (optional) 2x 15mm x 3mm.
Hin und wieder sind Gewindebohrer zu kurz um eine schwer zugängliche Stelle zu erreichen. Hier hilft dann eine kleine Verlängerung, die ich für M3 und M4 Gewinde erstellt habe. Sometimes taps are too short to reach a hard-to-reach place.…
Modelo realizado como respuesto para los tapones traseros de la moto de mi esposa con el fin de buscar alternativas creativas para la impresion 3d. Este modelo lo imprimi con filamento flexible con una altura de capa de 0.2 mm y 3…
The original design had a stacking lip on the bin which is not needed, and I had finger holes to get the staples and staple puller out, but it is easier to just dump it out.
I broke off five pieces of the 9mm cutter knife blade and put the teeth in with a file Print in PLA oder PETG Layer height: 0,2 mm Infill: 15 % Supports: no Nozzle: 0,4mm Walls: 3
Replacement latch for a Staples File Box File Portable Tote, part numbers 140165/111112 or 140163/110997. Print from PETG or similar for a mix of flexibility and strength. PLA is not recommended as it is likely to be too brittle.
This 3D-printed spacer block is meticulously designed to adapt the Tapcooler Nanocanner for compatibility with the BenchMK Drill-Powered Can Seamer. Engineered for precision, it provides a secure and accurate fit, improving both the…
This is remix on hook for tape for direct mount to the wall, no extra elements needed.
Metric adaptation of MultiBoard Tape rack by Glenn Brockett . Hole reduced to fit 10mm dowels Added mirrored body - just download and print I've just printed it and realized that it's better to orient the print on it's widest side, dowel…
recomendado imprimir ABS o mas resistentes 4 paredes 25% relleno panal abeja pegar con un muy buen pegamento con soportes los enganches boca abajo para que resistan mas enganches necesarios 6
This part is a holder for placing the “Krontaler” thermo-hygrometer inside an enclosure or a filament storage box. By the way, this ALDI-hygrometer can measure humidity from 20%, unlike some other models which start measuring only from…
UPDATE 11.05.2025 - Added support for Rapido UHF hotend. Minor fixes for part-cooling. I wanted a toolhead for CNC TAPv2 that also supports big hotend, has CPAP cooling and has clear access and visibility to the nozzle and hotend for…
This is the Master Taper Pill bead/ball counter/separator. This model was designed to be used to help those of you who are attempting to taper off of very difficult prescriptions that have tiny beads inside. No longer will you have to sit…
ENG: Tired of the timeless Italian design of the fuel tap on your moped? We have a solution for you! An honest Czechoslovak tap in a modern plastic design! The model is based on the tap from the Jawa 23 Mustang and Babetta 207, which…
These are simple punches for tapping in inlays in 3D printed and wood objects, and for tapping together tight fitting pieces. There is a wider square-tip option and a thinner round-tip one. They are 75mm long. I made them just big enough…
This was made out of necessity, doubtful if many others will have a need for it. Our kitchen sink has one of the faucets that has the spray head attached and when we would sometimes pull it out to spray an item it would get caught on the…
This is a quick and easy 3D print that transforms a finished duct tape roll into a useful container. Just print the lid and base, attach them to the roll, and you're done! Great for storing small items like screws, clips, or coffee…
Concept Description: Inspired by the good old days of mixtapes and boomboxes, the Cassette CarryBox is a fun and functional storage case for your audio cassette collection. The lid features an embossed boombox design, giving it a…
This is a simple 2x1 gridfinity storage design for the Hoto Measuring Tape. It sits upright so it's easy to access and doesn't take up extra space.
Something to hold a sticky trap tape on a flat surface. Base with corner holes and two extra centered holes for pushpins.
Simple tape and caliper storage. To reduce warping, ramp up the bed temperature to 80 degrees.
Printed in about 3hours, PLA 20% infill. Try to set higher temperature on bed, bcs of thermal deformation.
See My 3D Models See My Website Protege tus dispositivos y cables con esta tapa protectora impresa en 3D, diseñada específicamente para cubrir conectores USB tipo A macho. Ideal para evitar el ingreso de polvo, suciedad o daños físicos…
Summary Continued: . . . and want a reminder of what you could get once you're done. Either way we have the solution for both! Just don't eat it. This model was a team effort, so visit the other creators here: @JohnDoe_2915710…
This model is similar to those used in compressors. It can be printed in TPU to be relatively soft. The outer diameter is 22mm and the maximum screw diameter is 4.5mm for the thread and 9mm for the cap. It's better to use screws with a…
My family bathroom had a very long tap spout, which interfered with lower legs and knees of adults and heads of little playing people. Because this is an ‘external’ part of the tap, there was no chance of it adhering to any standard or…
Like most, I wanted a handle on my Saturn 4 Ultra 16k and I didn't really want to drill a hole or have double sided tape, so I designed a simple halde that just clips onto the lid. Installation: I found it easiest to start clipping in the…
Closable box for nine TZe tapes used in Brother label printers. Use two M3x40 screws for hinge.
@naehenderpilot hat bei Instagram diesen Halter designed für seinen Lasercutter. Ich habe eine Stl für den 3D Drucker daraus gebaut. Dies ist die erste Version, Verbesserungen kommen ggf über die Zeit.
A drift tap ball thing that you try to hit with your quarter panel of rc car. print one of each part except only use either 4 split links or 2 female split links and 2 male split links. the upright goes in the square hole in the base as…
This is a 2040 extrusion mount adapter for Tapo smart cameras including C200, C210, C211, C220, C225, TC70, and TC71 . 🔹 Designed to fit 2040 aluminum profiles – tested on Anycubic Kobra 2 Neo . 🔹 Non-adjustable – simple and sturdy mount.…
The tappet of the Surefeed Sealed Pet Bowl is a bit weak, becomes brittle over the time and breaks after a few years. This part can replace this tappet making the bowl working again. For better stability and to prevent the need of…
use at least 10% infill, and 2 walls when printing i printed it in pla and it works with no problem
Tapo C402 camera comes with a mounting kit. The original wing-nut is weak and becomes brittle after time in the weather. This replacement nut fits the threads on the original mount. I highly suggest printing in thick / UV resistant…
This is a replacement part for the Excell EX-19125BK Office Dual Core Tape Dispenser. It is a model of the small, removable spool that holds tape rolls with a 1-inch core. Files Included: Solid Version: The complete, one-piece model.…
This is a scotch tape dispenser designed to work with gridfinity. Features: Hollow body so you can add weight using sand or lead shot. Thread-in plugs seal in the loose material 3 Cutting blade options: Print the included file Trim a…
This is a catapult that uses a rubber band to propel the object in the bucket. The only things you need to make this are the 3d files and a rubber band. hope you enjoy launching this catapult!
Couldn't drill holes in my wall and needed a shelf there, so i designed this simple bracket to hold it. It's made to be held with double sided tape. It's supposed to be used on both ends of the shelf. Tape wouldn't hold very well with the…
On my last run i had it just in a corner shelf, but i had the Problem the cam couldnt be turned enough downwards. After looking around and not finding one that fits how i need it to fit, i designed my own Model. It is intended to be…
I loved Landon Campbell's made-for-Gridfinity dispenser idea! But I wanted a couple tweaks for my own environment. Among other things I added a bumper so that the tape roll could not fall off and reoriented the cutting surface to cut…
I made these to fit into the Mechanical M3 Bolt/Screw sorting device (but my remixed tray is required for it to work without cutting).
A simple box to hold the Season One cards for Fragged Double Tap. Created in BambuStudio with primitives and SVGs. If there are any issues, let me know The bumps that hold the box closed are a little tight at first, but should wear down…
![Camera mounts for the shelf edge and for any surface with double-sided tape [ OpenSCAD ]](https://media.printables.com/media/prints/1067473/images/8076221_2d7aa47a-3357-4a89-a00a-223f51c39ef7_22064794-d5cc-4db6-b416-550fcb835d9d/img_20240925_200540.jpg)
